2022 Subaru Forester Base Instrument Cluster | Dashboard Guidelines
The key information hub for drivers is the simple yet useful instrument cluster seen on the 2022 Subaru Forester Base model. This instrument cluster offers vital information including vehicle speed, RPM, fuel level, temperature, and warning signs in a straightforward and succinct manner. The instrument cluster of the 2022 Subaru Forester Base is made to be simple and easy to use, even though it might not have the sophisticated digital displays of higher trims. This ensures that drivers can rapidly access important data while having a convenient and comfortable driving experience.
2024 Subaru Forester Specs, Price, Features, Mileage and Review
Warning and indicator
Initial illumination for system check
S03AE29 Several of the warning and indicator lights illuminate when the ignition switch is initially turned to the “ON” position. This permits checking the operation of the bulbs. Apply the parking brake and turn the ignition switch to the “ON” position. For the system check, several of the following lights illuminate and then turn off after several seconds or after the engine has started.
: Seatbelt warning light (The seatbelt warning light turns off only when the driver fastens the seatbelt.)/Front passenger’s seatbelt warning light (The seatbelt warning light turns off only when the front seat passenger fastens the seatbelt.)
: Rear seatbelt warning light (if equipped)
: SRS airbag system warning light
: Front passenger’s frontal airbag ON indicator light
: Front passenger’s frontal airbag OFF indicator light
: CHECK ENGINE warning light/ Malfunction indicator light
: Coolant temperature low indicator light/Coolant temperature high warning light
: Charge warning light
: Oil pressure warning light
: Engine low oil level warning light
: Windshield washer fluid warning light
: AT OIL TEMP warning light
: Low tire pressure warning light (U.S.- spec. models)
: ABS warning light
: Brake system warning light
: Electronic parking brake light
: Low fuel warning light
: Door open warning light
: AWD warning light
: Power steering warning light
: Vehicle Dynamics Control warning light/ Vehicle Dynamics Control operation indicator light
: Vehicle Dynamics Control OFF indicator
ight
: Automatic headlight beam leveler warning light (if equipped)
: Auto Start-Stop warning light/Auto Start Stop OFF indicator light (yellow)
: Auto Start-Stop No Activity Detected
indicator light
If any lights fail to illuminate, it indicates a burned-out bulb or a malfunction of the corresponding system. Consult your authorized SUBARU dealer for repair.
Seatbelt warning light and chime S03AE01
Your vehicle is equipped with a seatbelt warning device at the driver’s and passenger’s seats, as required by current safety standards.
- Driver’s and front passenger’s seats
S03AE0114 With the ignition switch turned to the “ON” position, this device reminds the driver and front passenger to fasten their seatbelts by illuminating the warning lights in the locations indicated in the following illustration and sounding a chime.
Operation
S03AE011401 When the ignition switch is turned to the “ON” position, the driver’s and/or front passenger’s warning light will illuminate, then it will blink for several seconds. If the seatbelt of the driver’s seat is not fastened, the warning chime may make a peep sound.
2024 Subaru Forester Specs, Price, Features, Mileage and Review
NOTE
- If the driver’s and/or front passenger’s seatbelt(s) are/is not fastened while driving, the seatbelt warning system operates as follows according to the vehicle speed.
- The warning light will illuminate when driving approximately 4 mph (6 km/h) or less.
- The warning light will blink, and the warning chime will make a peep sound when driving between approximately 4 mph (6 km/h) and 13 mph (20 km/h). The warning chime will stop when the vehicle stops.
- The warning light will blink, and the warning chime will sound loudly when 15 seconds have elapsed while driving between approximately 4 mph (6 km/h) and 13 mph (20 km/h).
- The warning light will blink, and the warning chime will sound loudly when driving approximately more than 13 mph (20 km/h).
- The warning light will turn off and the warning chime will stop when the seatbelt is fastened.
- The seatbelt warning system can be cancelled. However, when the ignition switch is turned to the “ON” position after it is turned to the “OFF” position, the warning system settings will be restored. For details about the warning cancellation, contact a SUBARU dealer.
If there is no passenger on the front passenger’s seat, the seatbelt warning system for the front passenger’s seat will be deactivated. The front passenger’s seatbelt warning system monitors whether or not there is a passenger on the front passenger’s seat.
CAUTION
Observe the following precautions. Failure to do so may prevent the device from functioning correctly or cause the device to fail.
- Do not install any accessory such as a table or TV onto the seatback.
- Do not store a heavy load in the seatback pocket.
- Do not allow the rear seat occupant to place his/her hands or legs on the front passenger’s seatback, or allow him/her to pull the seatback.
- Do not use front seats with their backwards-forward position and seatback not being locked in place securely. If any of them are not locked securely, adjust them again.
If the seatbelt warning system for the front passenger’s seat does not function correctly (e.g., it is activated even when the front passenger’s seat is empty or it is deactivated even when the front passenger has not fastened his/her seatbelt), take the following actions.
- Ensure that no article is placed on the seat other than a child restraint system and its child occupant, although we strongly recommend that all children sit in the rear seat properly restrained.
- Ensure that there is no article left in the seatback pocket.
- Ensure that the backwards-forward position and seatback of the front passenger’s seat are locked into place securely by moving the seat back and forth.
If still the seatbelt warning system for front passenger’s seat does not function correctly after taking relevant corrective actions described above, immediately contact your SUBARU dealer for an inspection.
Rear passenger’s seats (if equipped)
- Rear left seat
- Rear center seat
- Rear right seat
With the ignition switch turned to the “ON” position, the seatbelt warning light and chime reminds the rear passenger to fasten their seatbelt by illuminating the warning lights in the locations indicated in the above illustration and sounding a chime.
WARNING
- The driver must check that the all passengers have fastened their seatbelts properly since the seatbelt warning system may not detect passengers under the following circumstances.
- When cushions or child restraint systems, etc., are used
- When a child or small adult is sitting in the seat
- Observe the following precautions
- Do not apply any strong impact to the rear seat.
- Do not fold the seatback forward when objects are on the seat.
- Do not spill liquid on the rear seat. If liquid is spilled, wipe it off immediately.
- Do not remove or disassemble the rear seat.
NOTE
- The seatbelt warning system of the rear seat detects if the seat is occupied by a passenger. Heavy cargo or large pets on the rear seat may result in the activation of the passenger seatbelt warning light and chime. Fastening the rear seatbelt prior to loading cargo or large pets will avoid activating the passenger seatbelt warning light and chime.
- When folding the rear seat, ensure that the seat is empty prior to folding. Items caught between the seat bottom and seatback, when folded, may damage the seat surface or activate the passenger seatbelt warning light and chime.
Operation
S03AE011501 If passengers in the rear seats do not fasten their seatbelts while the ignition switch is turned to the “ON” position, the seatbelt warning lights will illuminate or blink to indicate that their seatbelts are not fastened.
NOTE
- If the rear passenger’s seatbelt(s) are/is still not fastened while driving,the seatbelt warning system operates as follows according to the vehicle speed.
- The warning light will illuminate when driving approximately 4 mph (6 km/h) or less.
- When driving approximately between 4 mph (6 km/h) and 13 mph (20 km/h), if the seatbelts are not fastened for 50 seconds, the seatbelt warning lights will blink and a warning chime will sound. The chime will make a peep sound for 15 seconds, and it then will become louder and continue for 35 seconds. The warning light will blink for 50 seconds, then it will illuminate steadily and the chime will stop.
- When driving more than approximately 13 mph (20 km/h), if seatbelts are not fastened for 35 seconds, the warning lights of the unfastened seatbelts will blink and a chime will sound loudly. If the rear seatbelts are not fastened after 35 seconds, the blinking warning light will illuminate steadily and the chime will stop. The warning lights will continue to illuminate until their seatbelts are fastened.
- The warning light will turn off and the warning chime will stop when the seatbelt is fastened.
- The seatbelt warning light can be cancelled. However, when the ignition switch is turned to the “ON” position after it is turned to the “OFF” position, the warning system settings will be restored. For details about the warning cancellation, contact a SUBARU dealer.
FAQs
The instrument cluster in the 2022 Subaru Forester Base is the central display and gauges located behind the steering wheel, providing essential information about the vehicle’s performance and status.
The instrument cluster in the 2022 Forester Base is typically a combination of analog gauges and a digital information display.
The 2022 Subaru Forester instrument cluster typically displays data such as vehicle speed, RPM, fuel level, temperature, and various warning indicators.
The level of customization may be limited in the base model, but you can often adjust settings such as brightness and display themes.
Some models may feature a night mode with reduced brightness to improve visibility during nighttime driving.
You can typically navigate and control the 2022 Subaru Forester instrument cluster using buttons on the steering wheel or through the vehicle’s settings menu.
The base model’s 2022 Subaru Forester instrument cluster is designed for simplicity and may not include advanced features found in higher trims.
Navigation directions are often displayed on a separate infotainment screen rather than the 2022 Subaru Forester instrument cluster in the base model.
The information displayed on the 2022 Subaru Forester instrument cluster is typically accurate and sourced directly from the vehicle’s sensors and computer systems.
The 2022 Subaru Forester instrument cluster itself usually doesn’t require maintenance, but regular vehicle maintenance ensures accurate data and functionality.
Upgrading the 2022 Subaru Forester instrument cluster may be possible, but it’s essential to ensure compatibility and consult with a dealership or technician.
The procedure for resetting or calibrating the 2022 Subaru Forester instrument cluster may vary, so it’s advisable to consult the owner’s manual or a technician for guidance.
Maintenance schedule information is typically available in the owner’s manual or through the vehicle’s infotainment system rather than the 2022 Subaru Forester instrument cluster.
Useful Link
View Full PDF: Subaru Forester 2022 Base User Guide
2024 Subaru Forester Specs, Price, Features, Mileage and Review
2022 Subaru Forester Base Fuses and Fuse Box | How to change fuse