Subaru Forester 2023 Multi-function display (color LCD) (if equipped) Base

The Multi-function display Base System for the 2023 Subaru Forester has a lot of useful tools that are meant to make your driving experience better. This cutting-edge system is the hub for all your entertainment and information needs. It has many features, such as navigation, audio control, vehicle settings, and connectivity choices. Its easy-to-use design makes it simple to get to important data, maps, and multimedia, so you can stay connected and up to date while you’re driving. The 2023 Subaru Forester Multi-function display Base System gives drivers and passengers a smooth and high-tech experience inside the car, whether they’re navigating new terrain, listening to their favorite music, or changing the car’s settings.

2023 Subaru Forester Specs, Price, Features, Mileage (Brochure)

Multi-function display (color LCD) (if equipped)

NOTE
For models with a multi-function display (color LCD), refer to “Multi-function display (color LCD)” The Subaru Forester dashboard display provides essential information about the vehicle’s performance, navigation, and entertainment features through a digital screen located in the center of the dashboard.

1. Outside temperature indicator
2. X-MODE indicator (if equipped)
3. Driving information display
4. Clock With the ignition switch in the “ACC” position, the clock appears on the display. With the ignition switch in the “ON” position, the outside temperature indicator, driving information display, and clock all appear on the display.

NOTE
The indicated values vary in accordance with changes in the vehicle’s running conditions. Also, the indicated values may differ slightly from the actual values and should thus be treated only as a guide. To set the 2019 Subaru Forester clock set, press and hold the “Clock” button on the infotainment system until the time starts blinking, then use the “Tune/Select” knob to adjust the hours and minutes. Finally, press the “Clock” button again to confirm the time.

Driving information display

NOTE
You can set the units for both the multifunction display (black and white) and the combination meter at the same time.

 How to change the information display

INFO button

Pressing the INFO button on the steering wheel switches changes the display to the following sequence.

Driving range on remaining fuel

1. When setting the displayed unit as MPH
2. When setting the displayed unit as km/h
3. The driving range indicates the distance that can be driven taking into account the amount of fuel remaining in the tank and the average rate of fuel consumption.

1.  When setting the displayed unit as MPH

When setting the displayed unit as km/h If the driving range is shown as “ ”, there is only a tiny amount of fuel left in the tank.

NOTE
The driving range on the remaining fuel is only a guide. The indicated value may differ from the actual driving range on the remaining fuel, so you must immediately fill the tank when the low fuel warning light illuminates.

 Average fuel consumption

1. Displays the driving range per gallon of fuel
2. Displays the driving range per liter of fuel
3.  Displays the fuel consumption per 100 km This display shows the average rate of fuel consumption since the trip meter was last reset.

 TRIP RESET switch

Press the TRIP RESET switch to switch between the displays for the average fuel consumption that corresponds to the A trip meter mileage and the average fuel consumption that corresponds to the B trip meter mileage. When the trip meter display is reset, the corresponding average fuel consumption value is also reset.

NOTE
When the trip meter display is reset, the average fuel consumption corresponding to that trip meter display is not shown until the vehicle has subsequently covered a distance of 1 mile (or 1 km).

Current fuel consumption

1. Displays the driving range per gallon of fuel
2.  Displays the driving range per liter of fuel
3. Displays the fuel consumption per 100 km

This indication shows the rate of fuel consumption at the present moment.

1.  When units in miles is selected
2.  When units in km is selected

This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.

NOTE
When either trip meter display is reset, the average vehicle speed corresponding to that trip meter display is not quaintly covered a distance of 1 mile (or 1 km). Select the blank space in the menu to exit the driving information display selection.

NOTE

• The average fuel consumption and average vehicle speed are calculated even while the driving information display is not displayed.
• Even if you turn off the driving information display, the display will automatically turn on when the battery voltage is disconnected and then reconnected for battery replacement or fuse replacement. Turn off the display of driving information display shown until the vehicle has a subset.

Outside temperature indicator

1.  U.S.-spec. models
2.  Except for U.S.-spec. models

NOTE

•  The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions.
•  While parking or driving at low speeds
• When the outside temperature changes suddenly (for example: when going in and out of an underground parking area or when passing through a tunnel)
•  When starting the engine after being parked for a certain period

1. The temperature unit cannot be changed.  Road surface freeze warning indication U.S.-spec. models.

Except for U.S.-spec. models
When the outside temperature drops to a certain temperature or lower, the temperature indication flashes for 5 seconds to show that the road surface may be frozen. If the display is already indicating that the outside temperature is low when the ignition switch is turned to the “ON” position, the indication does not flash.

NOTE
The outside temperature indication may differ from the actual outside temperature. The road surface freeze warning indication should be treated only as a guide. Be sure to check the condition of the road surface before driving.

 X-MODE indicator (if equipped)
This indicator will be shown while X-MODE is activated. It will turn off when X-MODE is deactivated.

Multi-function display (color LCD)

NOTE
For models with multi-function display (black and white), refer to “Multi-function display (black and white)”

WARNING
Always pay adequate attention to safe driving when operating the multi-function display (color LCD) while the vehicle is in motion. When the operation of the multi-function display (color LCD) is disturbing your awareness and ability to concentrate on driving, stop the vehicle in a safe place before performing operations on the screen. Also, do not concentrate on the display while driving. Doing so may cause you to look away from the road and could result in an accident.

Features
The multi-function display (color LCD) has the following functions.

Description Page
Displays useful messages, such as notifications, etc. 204 Displays basic screens (e.g. fuel consumption screen, etc.) Sets and adjusts maintenance notification 223 Also, the multi-function display (color LCD) can also be used to set and initialize the multi-function display (color LCD) itself.

NOTE

• When the vehicle is in motion, certain functions and selections may not be available.
• You can set the language and units for both the multi-function display (color LCD) and the combination meter at the same time.
• The images displayed in this Owner’s Manual are sample images. The actual image may vary depending on the market and vehicle specifications.

NOTE

• When the vehicle is in motion, certain functions and selections may not be available.
• You can set the language and units for both the multi-function display (color LCD) and the combination meter at the same time.
• The images displayed in this Owner’s Manual are sample images. The actual image may vary depending on the market and vehicle specifications.

Welcome screen
When the driver’s door is opened and closed, the welcome screen will appear for a short time.

NOTE

•  The welcome screen will disappear when the ignition switch is turned to the “ON” position while the welcome screen is displayed.
•  The welcome screen can be set to on or off.
•  For a certain period of time, after the welcome screen has once appeared, it may not appear again even when the driver’s door is opened and closed again. This does not indicate a malfunction.

Self-check screen
When the setting is “On”, the self-check screen appears. When the ignition switch is turned to the “ON” position, the vehicle self-check will be performed. The screens corresponding to the following items will appear one after another for several seconds each.

1. Engine oil: Checks the interval of engine oil replacement.
2. Oil filter: Checks the interval of oil filter replacement.
3. Tires: Checks the interval of tire rotation.
4. Inspection and maintenance: Checks the interval of inspection and maintenance. When the checks are performed, the color of the icon corresponding to the checked item will change. If there is a notification, the message will be displayed. Take the appropriate actions based on the message indicated. After the self-check is completed, today’s date, the stored birthday or the stored anniversary is displayed.

NOTE

• After performing the maintenance, change the setting of the corresponding maintenance item.
• The maintenance notification screen will be displayed under either of the following conditions.
• The period of time remaining until the registered notification date is 15 days or less.
• The total driving distance remaining until the registered notification distance is approximately 311 miles (500 km) or less.
• The maintenance notification screen will be displayed until either of the following conditions is satisfied.
• The period of time passed after the registered notification date is 15 days or more.

The total distance driven after the registered notification distance is approximately 311 miles (500 km) or more.

Interruption screen

Example
Useful messages, such as reminder information, weather information (if equipped) and traffic information (if equipped) may interrupt the current screen and appear on the display accompanied by a beep. Take proper action according to the message. The interruption screen will return to the original screen after a few seconds. Also, you can press the INFO button to skip the interruption screen.

 Basic operation

Control switch

1. INFO button
2.  /SET
3. Press the INFO button on the steering wheel to switch the item displayed on the basic screen. You can operate the items on the setting screen by using the “ ”, “ ” and “ /SET” switches.

Basic screens

1. Clock
2. Climate control*
3. Outside temperature
4. Information screen

This is not displayed on the multi-function display (color LCD) when the ignition switch is in the “ACC” position. While the ignition switch is in the “ACC” or “ON” position, the basic screen will be displayed.

Outside temperature indicator
The outside temperature is displayed on the multi-function display (color LCD).

NOTE

• The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions.
• While parking or driving at low speeds
• When the outside temperature changes suddenly (for example: when going in and out of an underground parking area or when passing through a tunnel)
• When starting the engine after being parked for a certain period of time
• The temperature unit cannot be changed.

Climate control screen
The climate control status is displayed on the multi-function display (color LCD).

Climate control screen

1. Set temperature indicator (left-hand side)
2. FULL AUTO indicator
3. AUTO indicator
4. Airflow mode indicator
5. Set temperature indicator (right-hand side)*1
6. Air inlet selection indicator
7. SYNC indicator*1
8. Fan speed indicator

Air conditioner ON indicator *1: Models with the SYNC function only When operating the climate control system, the basic screen switches to the climate control screen.

Clock
The clock can be displayed in either 12- an hour display or a 24-hour display.

Information screen
Press the INFO button on the steering wheel to switch the item displayed on the information screen.

Content	Description	Page
Electric components operating status screen*1	Displays the operating status of the electric components and equipment.	207
Prevention safety screen	Displays the status of your vehicle.	207
EyeSight screen	Displays the operating status of EyeSight.	208
Favorite screen	Displays up to 3 optional items.	208
Weather information screen*2	Displays weather information.	209
Traffic information*2/Navigation*3 screen	Displays information linked with the navigation system.	209
Audio screen*3	Displays audio system information.	210
Fuel consumption screen	Displays fuel consumption information.	210
Clock/date screen	Displays the clock.	210
Guidance screen	Moves to the setting screen.	211

*1: If equipped
*2: Models with Sirius XM Satellite Radio
*3: Models with navigation system

Electric components operation screen (if equipped)

1. Reverse Automatic Braking (RAB) system*
2. Lane Departure Warning indicator*
3. Pre-Collision Braking System indicator*
4. High beam assist
5. Front view monitor*
6. Driver Monitoring System* *: If equipped
7. This screen displays the electric components’ operation status of the vehicle.
8. Press and hold the “INFO” button to enter the menu screen.
9. Operate the “ ” or “ ” button to select the preferred item.
10. Pull the “ /SET” switch to enter the selected item.

NOTE

• Indicators do not display for functions that are not equipped to the vehicle.
• The indicators of functions that are not operating are displayed in gray.
• Prevention safety screen

1. Telltale screen
2. Steering angle
3. Vehicle posture
4. Running condition

X-MODE screen

1. Vehicle posture
2. X-MODE

This screen displays the driving status of the vehicle and the operation status functions. For functions that are operating, the indicator will illuminate or flash.

NOTE

• The vehicle posture indication may differ from the actual vehicle posture.
• When X-MODE is turned on, the screen of the multi-function display is switched to the prevention safety screen.
• The vehicle posture angle varies not only due to the angle of the road surface, but also due to the vehicle tilt caused by the occupants, cargo, and acceleration or deceleration.

1. Lead vehicle indicator
2. Your own vehicle indicator
3. Stop lights
4. Road line indicator
5. Lane indicator
6. Lane Centering indicator
7. Steering wheel indicator This screen displays the status of the EyeSight system. The lead vehicle indicator moves forward and backward depending on the distance from the vehicle in front.

Favorite screen

This screen displays up to three optional pieces of information that can be selected from the following items.

1. If Equipped
2. Models with Sirius XM Satellite Radio

NOTE
Some displayed items may not be displayed depending on the model and specifications. The items shown on the favorite screen can be changed.

1. Weather information for the destination*
2. Weather information for the current location
3. Only when a destination is set in the navigation system The weather information is displayed on the screen.

NOTE

• When all of the following conditions are satisfied, weather information is displayed.
• The vehicle is equipped with an audio and navigation system for Sirius XM satellite radio.
• You have a current Sirius XM satellite radio subscription.

Navigation screen (models with navigation system)

The navigation system information to the destination is displayed on the screen.

NOTE
When a destination is not set in the navigation system, the compass orientation, name, route sign, and speed limit of the road the vehicle is traveling on remain displayed on the screen.

Audio screen

The screen of the currently selected audio source is displayed.

1. Driving range on remaining fuel
2. Average fuel consumption corresponding to the driving distance of each trip meter
3. Current fuel consumption
4. User information (if equipped) The fuel consumption information is displayed
   on the screen. If the driver is recognized by the Driver Monitoring System, the average fuel consumption for the driver will be displayed.

NOTE
The driving range on the remaining fuel is only a guide. The indicated value may differ from the actual driving range on the remaining fuel, so you must immediately fill the tank when the low fuel warning light illuminates.

Clock/date screen

The time and date are displayed. You can adjust the time and date.

Guidance screen

When the INFO button on the steering wheel is pressed and held on this screen, the setting screen can be displayed.

NOTE
When the combination meter display (color LCD) is displaying the menu screen entering screen, the system will not move to the setting screen even if the INFO button is pressed and held.

Setting screen

1.  Press and hold the INFO button on the guidance screen. The top menu is displayed.
2.  Operate the “ ” or “ ” switch to select the preferred menu from the top menu.
3.  Pull the “ /SET” switch to enter the selected menu.
4. Operate the “ ” or “ ” switch to select the preferred menu from the 2nd menu.
5.  Pull the “ /SET” switch to enter the selected menu.

FAQ

What is the multi-function display in the Subaru Forester Base?
The multi-function display is a screen located in the center of the dashboard that provides important information about the vehicle’s performance.

How do I access the multi-function display in the Subaru Forester Base? 
You can use the buttons located on the steering wheel. Press the “Info” button to cycle through the different displays, and use the “+” and “-” buttons to adjust settings.

What information does the multi-function display show?
The display can show a variety of information, including fuel economy, trip mileage, outside temperature, clock, audio system information, and more.

Can I change the information that is displayed on the multi-function display? 
Yes, you can customize the display to show the information that is most important to you.

How do I reset the trip mileage on the multi-function display? 
Press and hold the “Info” button until the display starts to flash. Then, use the “+” or “-” button to select “Trip A” or “Trip B,” and press the “Info” button again to reset the mileage.

Can I change the units of measurement on the multi-function display?
Yes, you can change the units of measurement for certain displays, such as fuel economy and temperature.

Can I view real-time fuel economy on the multi-function display? 
Yes, the display can show real-time fuel economy, as well as average fuel economy for a trip or over a longer period of time.

Does the multi-function display show tire pressure?
Yes, the display can show the tire pressure for each individual tire.

How do I adjust the clock on the multi-function display?
Press and hold the “Info” button until the display starts to flash. Then, use the “+” or “-” button to adjust the time.

Can I view information about my audio system on the multi-function display?
Yes, the display can show information about the current audio track or radio station.

How do I switch between different audio sources on the multi-function display?
Use the “Mode” button located on the audio system to switch between different audio sources.

Can I view a digital speedometer on the multi-function display? 
Yes, the display can show a digital speedometer in addition to the analog speedometer on the dashboard.

Can I view a map or navigation directions on the multi-function display?
No, the Base model does not include built-in navigation or map displays on the multi-function screen.

Can I view alerts or warning messages on the multi-function display? 
Yes, the display can show alerts and warning messages related to the vehicle’s performance or safety systems.

Is the multi-function display in the Subaru Forester Base easy to use?
Yes, the display is user-friendly and intuitive, with clearly labeled buttons and easy-to-navigate menus.

Useful Link

View Full User Guide: Subaru Forester 2023 Base User Guide

Download Manuals: https://www.subaru.com/owners/vehicle-resources/manuals.html

2023 Subaru Forester Specs, Price, Features, Mileage (Brochure)