Subaru Legacy 2023 Wheel Replacement Touring XT
Notable among Subaru’s lineup additions, the 2023 Subaru Legacy Touring XT brings a number of improvements, chief among them being the ability to replace its wheels. This model, which is renowned for striking a mix between comfort and performance, now comes with an improved wheel system that improves driving dynamics and aesthetic appeal. The redesigned wheels offer improved handling, grip, and stability overall and are designed to work in harmony with the Legacy’s all-wheel-drive capabilities. These improvements make the Legacy Touring XT a more alluring option for customers looking for a balance between style and substance. They also highlight the vehicle’s clean and sophisticated design, making for a more engaging driving experience.
2024 Subaru Legacy Specs, Price, Features, Mileage (Brochure)
Wheel replacement
When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are available from SUBARU dealers.
WARNING
Use only those wheels that are specified for your vehicle. Wheels not meeting specifications could interfere with brake caliper operation and may cause the tires to rub against the wheel well housing during turns. The resulting loss of vehicle control could lead to an accident.
Align the valve with the valve hole in the cover, then fit the cover on the wheel by tapping your hand evenly around the circumference of the cover.
Alloy wheels (if equipped)
Alloy wheels can be scratched and damaged easily. Handle them carefully to maintain their appearance, performance, and safety.
- When any of the wheels are removed and replaced for a tire rotation or to change a flat, always check the tightness of the wheel nuts after driving approximately 600 miles (1,000 km). If any nut is loose, tighten it to the specified torque.
- Never apply oil to the threaded parts, wheel nuts, or tapered surfaces of the wheel.
- Never let the wheel rub against sharp protrusions or curbs.
- When wheel nuts, balance weights, or the center cap is replaced, be sure to replace them with genuine SUBARU parts designed for alloy wheels.
Windshield washer fluid
Windshield washer fluid warning light
When there is only a small amount of washer fluid remaining, the windshield washer fluid warning light will illuminate. When this occurs, refill the washer fluid as follows.
“FULL” mark
Remove the washer tank filler cap, then add fluid until it reaches the “FULL” mark on the tank. Use windshield washer fluid. If windshield washer fluid is unavailable use clean water. In areas where water freezes in winter, use an anti-freeze type windshield washer fluid.
CAUTION
Never use engine coolant as washer fluid because it could cause paint damage. If you fill the windshield washer tank with a fluid with a different concentration from the one used previously, purge the old fluid from the piping between the windshield washer tank and washer nozzles by operating the washer for a certain period of time. Otherwise, if the concentration of the fluid remaining in the piping is too low for the outside temperature, it may freeze and block the nozzles.
CAUTION
- Adjust the washer fluid concentration appropriately for the outside temperature. If the concentration is inappropriate, sprayed washer fluid may freeze on the windshield and obstruct your view, and the fluid may freeze in the windshield washer tank.
- State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer anti-freeze additive. Washer fluids containing non-methanol anti-freeze agents should be used only if they provide cold weather protection without damaging your vehicle’s paint, wiper blades or washer system.
Replacement of wiper blades
Grease, wax, insects, or other material on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove the streaks after operating the windshield washer or if the wiper operation is jerky, clean the outer surface of the windshield and rear window using a sponge or soft cloth with a neutral detergent or mild-abrasive cleaner. Do not, however, use detergent to clean the blade rubbers. Use only a sponge or soft cloth (and no neutral detergent or mild abrasive cleaner) when you clean the blade rubbers. If you wipe the rubber of the blade strongly, the black coating component will peel off, which will cause the wiper to judder. Also, after wiping it off, check that the rubber has not come loose. After cleaning the window glass and wiper blade rubbers, be sure to rinse them with clean water. Rinse the window until the water does not form beads on the glass. This indicates that the glass is clean.
CAUTION
- Do not clean the wiper blades with gasoline or a solvent, such as paint thinner or benzene. This will cause deterioration of the wiper blades.
- When you wish to raise the passenger-side wiper arm, first raise the driver-side wiper arm. Otherwise, the passenger-side wiper assembly and driver-side wiper assembly will touch each other, possibly resulting in scratches.
- Return the passenger-side wiper arm to its original position before returning the driver-side wiper arm to its original position. Otherwise, the passenger-side wiper assembly and driver-side wiper assembly will touch each other, possibly resulting in scratches.
- When returning the raised wipers to their original positions, return the wipers slowly on the windshield by hand. Returning the wipers from the detached positions by the spring operation might change the shape of the wiper arm or scratch the windshield.
- While removing the wiper blades from the wiper arms, do not return the wiper arms to their original positions. Otherwise, the windshield surface may be scratched.
If you cannot eliminate the streaking even after following this method, replace the wiper blades using the following procedures.
Windshield wiper blade assembly
- Raise the wiper arm off the windshield. First, raise the driver’s side wiper arm and then raise the front passenger’s side wiper arm.
CAUTION
Hold the wiper arm when replacing the wiper blade. Holding the wiper blade may result in blade deformation.
Lock knob
- Hold the wiper blade connection by hand, push the lock knob to release the lock, and then pull out the wiper blade assembly.
NOTE
Do not use a hard object to push the lock knob. The lock knob may be scratched.
- When installing the wiper blade assembly, align it with the wiper arm connection part and then slide it in the opposite direction of removal to install. After installing the wiper blade assembly, check that the connection part is locked completely.
- Hold the wiper arm by hand and slowly lower it in position.
NOTE
Do not use a hard object to push the lock knob. The lock knob may be scratched.
Windshield wiper blade rubber
Replace the wiper blade rubber according to the following procedure.
Slit
- Pull the wiper blade rubber from the right side in the order of (1), (2), and (3) until the slit on the wiper blade can be seen position.
- Pull the end of the wiper blade rubber through the slit to remove it.3. Insert a new wiper blade rubber into the slit. Do not insert the wiper blade rubber into the wrong slit.
- Insert a new wiper blade rubber into the slit. Do not insert the wiper blade rubber into the wrong slit.
NOTE
It may be difficult to perform the wiper blade rubber replacement. We recommend that you contact your SUBARU dealer for wiper blade rubber replacement if necessary.
Rear window wiper blade assembly (Outback/Subaru Outback Wilderness)
- Raise the wiper arm off the rear window.
- Turn the wiper blade assembly counterclockwise.
- Pull the wiper blade assembly toward you to remove it from the wiper arm.
- Hold the wiper arm by hand and slowly lower it in position.
- Attach the wiper blade.
NOTE
It may be difficult to perform the wiper blade rubber replacement. We recommend that you contact your SUBARU dealer for wiper blade rubber replacement if necessary.
Rear window wiper blade assembly
- Raise the wiper arm off the rear window.
- Turn the wiper blade assembly counterclockwise.
- Pull the wiper blade assembly toward you to remove it from the wiper arm.
- Install the wiper blade assembly to the wiper arm. Make sure that it locks in place.
- Hold the wiper arm by hand and slowly lower it in position.
Rear window wiper blade rubber (Outback/Subaru Outback Wilderness)
- Pull out the end of the blade rubber assembly to unlock it from the plastic support.
- Pull the blade rubber assembly out of the plastic support.
Metal spines - If the new blade rubber is not provided with two metal spines, remove the metal spines from the old blade rubber and install them in the new blade rubber.
- Align the claws of the plastic support with the grooves in the blade rubber assembly, then slide the blade rubber assembly into place.
Securely retain both ends of the rubber with the stoppers on the plastic support ends. If the rubber is not retained properly, the wiper may scratch the rear window glass. - Install the wiper blade assembly to the wiper arm. Make sure that it locks in place.
- Hold the wiper arm by hand and slowly lower it in position.
Battery
- Before beginning work on or near any battery, be sure to extinguish all cigarettes, matches, and lighters. Never expose a battery to an open flame or electric sparks. Batteries give off a gas that is highly flammable and explosive.
- For safety, in case an explosion does occur, wear eye protection or shield your eyes when working near any battery. Never lean over a battery.
- Do not let battery fluid contact eyes, skin, fabrics, or paint because battery fluid is a corrosive acid. If battery fluid gets on your
skin or in your eyes, immediately flush the area with water thoroughly. Seek medical help immediately if acid has entered the
eyes. If battery fluid is accidentally swallowed, immediately drink a large amount of milk or water, and seek medical attention immediately. - To lessen the risk of sparks, remove rings, metal watchbands, and other metal jewelry
- Never allow metal tools to contact the positive battery terminal and anything connected to it WHILE you are at the same time in contact with any other metallic portion of the vehicle because a short circuit will result.
- Keep everyone including children away from the battery.
- Charge the battery in a well-ventilated area.
- Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California
to cause cancer and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer - Wash hands after handling.
CAUTION
Never use more than 10 amperes when charging the battery because it will shorten battery life.
It is unnecessary to periodically check the battery fluid level or periodically refill with distilled water.
FAQ
The 2023 Subaru Legacy Touring XT typically comes with 18-inch wheels as standard.
Yes, Subaru offers a variety of wheel designs for the Touring XT to suit different tastes and styles.
Yes, larger wheels can be fitted, but it’s important to ensure they are compatible with the car’s specifications to avoid any handling or safety issues.
Altering the wheel size can potentially affect the warranty if it leads to damage or affects the vehicle’s performance. It’s best to consult with a Subaru dealer.
Yes, the Touring XT often has unique wheel designs or finishes that distinguish it from other models in the Legacy lineup.
The Legacy Touring XT typically comes with all-season tires that provide a good balance of performance in various weather conditions.
While Subaru doesn’t typically equip the Legacy with run-flat tires, they can be purchased separately and installed.
Yes, you can fit winter tires on the standard wheels for improved traction in snowy or icy conditions.
The Touring XT usually comes with standard wheel colors, but custom paint jobs can be done through aftermarket services.
Larger wheels can sometimes reduce fuel efficiency slightly due to increased rolling resistance and weight.
Yes, wheel alignment is typically checked during regular maintenance intervals to ensure optimal handling and tire wear.
The bolt pattern for the Legacy Touring XT’s wheels is usually 5×114.3 mm.
Yes, aftermarket wheels can be installed, but it’s important to choose wheels that meet the vehicle’s specifications.
Wheels should be replaced if they are damaged, or corroded, or if you’re experiencing ride quality issues.
Upgrading to lighter or better-designed wheels can enhance performance, and handling, and potentially improve fuel economy.
Useful Link
View Full User Guide: Subaru Legacy 2023 Touring XT User Guide
Download Manuals: https://www.subaru.com/owners/vehicle-resources/manuals.html
2024 Subaru Legacy Specs, Price, Features, Mileage (Brochure)