2018 Suzuki New ERTIGA 

The Suzuki New Ertiga came out in 2018 as a small multi-purpose vehicle (MPV). It is made to be comfortable, flexible, and efficient for families or single people who need a roomy and useful car. The New Ertiga has a sleek, modern look, with clean lines and a stylish grille in front. Its exterior is small but roomy, which makes it easy to drive in cities and gives it plenty of space for people and cargo. The New Ertiga has a cosy and roomy cabin. It has seats that can be moved around so it can fit up to seven people. This makes it good for bigger families or group trips. The seats are made to be comfortable, and the second and third rows can be folded down when more room is needed for cargo. The New Ertiga comes with a number of comfort and technology features that make driving easier and more enjoyable. It might have a touchscreen infotainment system, a rearview camera, and buttons on the steering wheel, among other things. Both the driver and the guests will find these features entertaining, useful, and easy to use. When it comes to speed, the New Ertiga usually comes with a small engine that is both powerful and good on gas. It is made to run well and use the least amount of gas possible, which makes it a good choice for daily driving or long trips. Safety is also a top priority for the New Ertiga, which has features like seatbelts, anti-lock brakes (ABS), electronic stability control (ESC), and seat belt pretensioners. These safety features are meant to protect the people inside the car in case of an accident or other emergency.

NOTE:
The illustrations in this manual represent a typical variation, which may differ from your vehicle.“SUZUKI dealer” means an Authorized Suzuki Dealer and an Authorized Suzuki Service Workshop.

VEHICLE DATA RECORDINGS
There are certain components of your vehicle incorporating data storage modules or memories, which temporarily or permanently store the technical data below listed. These data are exclusively technical and serve for (i) identifying and correcting faults that occurred in the Vehicle and/or (ii) optimizing functions of the Vehicle.

Recorded data

• Malfunctions, faults, and errors in important system components. (e.g. lights, brakes)
• Reactions of the Vehicle in certain situations (e.g. inflation of SRS airbags, activation of stability control system).
• Operating conditions of system components (e.g. filling levels).
• Status messages of the Vehicle and its individual components (e.g. vehicle speed, acceleration, deceleration, lateral acceleration).
• Ambient conditions (e.g. outside temperature).

RECOMMENDATION OF GENUINE SUZUKI PARTS AND ACCESSORIES USE

SUZUKI strongly recommends the use of genuine SUZUKI parts and accessories. Genuine SUZUKI parts and accessories are built to the highest standards of quality and performance, and are designed to fit your vehicle’s exact specifications. A wide variety of non-genuine replacement parts and accessories for SUZUKI vehicles are currently available in the market. Using these parts and accessories can affect the vehicle performance and shorten its useful life. Therefore, installation of non-genuine SUZUKI parts and accessories is not covered under warranty.

Non-genuine SUZUKI parts and accessories
Some parts and accessories may be approved by certain authorities in your country. Some parts and accessories are sold as SUZUKI-authorized replacement parts and accessories. Some genuine SUZUKI parts and accessories are sold as re-use parts and accessories. These parts and accessories are non-genuine SUZUKI parts and accessories and use of these parts is not covered under warranty.

Re-use of genuine SUZUKI parts and accessories
The resale or re-use of the following items which could cause hazards for users is expressly forbidden:

• Airbag components and all other pyrotechnic items, including their components (e.g. cushions, control devices and sensors)
• Seat belt system, including their components (e.g. webbing, buckles and retractors)

The airbag and seat belt pre-tensioner components contain explosive chemicals. These components should be removed and disposed of properly by SUZUKI-authorized service shop or scrap yard to avoid unintended explosion before scrapping.

EXTERIOR

1. Rear Window Wiper (P.2-46)
2. High-mount Stop Light (P.6-39)
3. Radio Antenna (P.5-24)
4. Engine Hood (P.5-58)
5. Headlight (P.2-42, 6-35)
6. Windshield Wipers (P.2-45)
7. Fuel Filler Cap (P.5-57)
8. License Plate Light (P.6-39)
9. Tailgate (P.2-4)
10. Rear Combination Light (P.6-38)
11. Front Fog Light (if equipped) (P.2-30, 6-37)
12. Outside Rearview Mirrors (P.2-21)
13. Door Locks (P.2-2)
14. Parking Sensors (if equipped)(P.3-23)

Floor Mats

To prevent the driver’s side floor mat from sliding forward and possibly interfering with the operation of the pedals, genuine SUZUKI floor mats are recommended. Whenever you put the driver’s side floor mat back in the vehicle after it has been removed, be sure to hook the floor mat grommets to the fasteners and position the floor mat properly in the footwell. When you replace the floor mats in your vehicle with a different type such as all-weather floor mats, we highly recommend using genuine SUZUKI floor mats for proper fitting.

Seat Adjustment

Never attempt to adjust the driver’s seat or seatback while driving. The seat or seatback could move unex-pectedly, causing loss of control. Make sure that the driver’s seat and seatback are properly adjusted before you start driving. To avoid excessive seat belt slack, which reduces the effectiveness of the seat belts as a safety device, make sure that the seats are adjusted before the seat belts are fastened.

Adjusting Seat Position

The adjustment lever for each front seat is located under the front of the seat. To adjust the seat position, pull up on the adjustment lever and slide the seat forward or rearward.
After adjustment, try to move the seat for-ward and rearward to ensure that it is securely latched.

WARNING
All seatbacks should always be in an upright position when driving, or seat belt effectiveness may be reduced. Seat belts are designed to offer maxi-mum protection when seatbacks are in the upright position. To adjust the seatback angle of front seats, pull up the lever on the outboard side of the seat, move the seatback to the desired position, and release the lever to lock the seatback in place.

Head Restraints

Head restraints are designed to help reduce the risk of neck injuries in the case of an accident. Adjust the head restraint to the position which places the center of the head restraint closest to the top of your ears. If this is not possible for very tall pas-sengers, adjust the head restraint as high as possible.

WARNING

• Never drive the vehicle with the head restraints removed.
• Do not attempt to adjust the head restraint while driving.

NOTE:
It may be necessary to recline the seat-back to provide enough overhead clear-ance to remove the head restraint.

To raise the front head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the lock lever. If a head restraint must be removed (for cleaning, replacement, etc.), push in the lock lever and pull the head restraint all the way out.

WARNING

• After using the walk-in function, be sure to return the folded seat back to an upright position.
• Before returning a walk-in seat to its normal seating position, make sure that the feet of the passenger in the 3rd-row seat are out of the way.
• After returning the seat to its normal seating position, make sure it is securely latched.

Head restraints are designed to help reduce the risk of neck injuries in the case of an accident.

FAQ