2020 Suzuki New ERTIGA Speedometer User Manual
At the center of the 2020 Suzuki New Ertiga is a speedometer that is both practical and modern in design. This important tool is a blend of traditional and digital parts that work well together to give drivers a clear view of their vehicle’s speed and other important information. The speedometer is a key to important driving information because it has both a traditional needle and a digital display. It is lit up so that it can be seen in all kinds of lighting, and the digital screen shows important information like odometer numbers, trip information, and engine revolutions per minute (RPM). The speedometer in the 2020 Suzuki New Ertiga is a true companion on the road. It not only improves the driving experience, but it also shows how innovation and usefulness come together in this versatile and family-friendly MPV.
Speedometer
The speedometer indicates vehicle speed.
Tachometer
The tachometer indicates engine speed in revolutions per minute.
NOTICE
Never drive the vehicle with the engine revving in the red zone or severe engine damage can result. Keep the engine speed below the red zone even when downshifting to a lower gear position.
Refer to “Downshifting maximum allowable speeds” in the “OPERATING YOUR VEHICLE” section.
Fuel Gauge
When the ignition switch is in the ON position or the ignition mode is “ON”, this gauge gives a rough indication of the amount of fuel in the fuel tank. “F” stands for full and “E” stands for empty.
If the fuel meter indicator shows only one segment to “E”, refill the tank as soon as possible.
NOTE:
If the last segment blinks, it means that the fuel is almost empty. If the low fuel warning light (1) comes on, refill the fuel tank immediately.
NOTE:
The activation point of the low fuel warning light (1) varies depending on road conditions (for example, slope or curve) and driving conditions because of fuel movement in the tank. Refer to “Low fuel warning light” in “Warning and indicator lights” in this section for details. Mark (2) indicates that the fuel filler door is located on the left side of the vehicle.
Brightness Control
When the ignition switch is turned “ON” or pushed to “ON” mode, the instrument panel lights come on. Your vehicle has a system to automatically dim the brightness of the instrument panel lights when the position lights or headlights are on. When the position lights and/or headlights are on, you can adjust change the bright-ness of the instrument cluster lights bright-ness in seven levels of intensity. To increase the brightness of the instrument panel lights, turn the brightness control knob (1) clockwise. To reduce the brightness of the instrument panel lights, turn the brightness control knob (1) counterclockwise.
WARNING
Do not adjust the brightness of the instrument panel lights while driving. Otherwise, you could lose control of the vehicle.
NOTE:
if you do not turn the brightness control knob within several seconds of activating the brightness control display, the brightness control display will be canceled automatically.
-
- When you reconnect the battery, the brightness of the instrument panel lights will be reinitialized. Readjust the brightness according to your preference.
NOTE: - If you adjust to the maximum brightness level when the position lights or headlights are on, the following functions will be canceled.
- The function automatically dims the brightness of instrument panel lights.
- The function operates with the brightness control, except maximum brightness level
- When you reconnect the battery, the brightness of the instrument panel lights will be reinitialized. Readjust the brightness according to your preference.
Information Display
Information display is shown when the ignition switch is turned “ON” or pushed to “ON” mode.
- Trip meter selector knob
- Indicator selector knob
- Information display
The information display shows the following information.
Display (A)
Clock
Display (B)
Thermometer (if equipped)
Display (C)
Keyless push start system remote controller battery consumption warning light (if equipped) / Selector position (for automatic transmission vehicles)
Display (D)
Trip meter / Instantaneous fuel consumption / Average fuel consumption /
Driving range / Odometer
Display (E)
Fuel gauge
Clock
The display (A) shows the time. To change the time indication:
- Push the trip meter selector knob (1) and the indicator selector knob (2) together.
- To change the hour indication, turn the indicator selector knob (2) left or right repeatedly when the hour indication blinks. To change the hour indication quickly, turn and hold the indicator selector knob (2). To set the hour indication, push the indicator selector knob and the minute indication will blink.
- To change the minute indication, turn the indicator selector knob (2) left or right repeatedly when the minute indication blinks. To change the minute indication quickly, turn and hold the indicator selector knob (2). To set the minute indication, push the indicator selector knob (2).
WARNING
If you attempt to adjust the display while driving, you could lose control of the vehicle. Do not attempt to adjust the display while driving.
NOTE:
When you disconnect either of the terminals from the battery and keep it for a minute, the clock indication will be initialized. Change the indication again to your preference after the reconnection.
FAQ
A: The 2020 Suzuki New Ertiga is a compact multi-purpose vehicle (MPV) designed for families, offering practicality, space, and efficiency.
A: The speedometer of the 2020 Ertiga features a clear and easy-to-read design with a combination of analog and digital elements.
A: The speedometer of the 2020 Ertiga typically features an analog speedometer needle paired with a digital information display.
A: The digital display on the speedometer of the 2020 Ertiga typically shows various information such as odometer reading, trip meters, fuel level, and other vehicle-related data.
A: Some versions of the 2020 Ertiga might allow you to switch between different units of measurement, such as miles per hour (mph) and kilometers per hour (km/h).
A: Yes, the speedometer of the 2020 Ertiga often includes a tachometer that displays the engine’s revolutions per minute (RPM).
A: While some versions of the 2020 Ertiga might have a digital speed readout, it’s recommended to check the specific trim level and features to confirm this.
A: The accuracy of the speedometer in the 2020 Ertiga is designed to meet industry standards and regulatory requirements.
A: Many vehicles, including the 2020 Ertiga, feature adjustable brightness settings for the speedometer and instrument cluster to ensure optimal visibility during nighttime driving.
A: Depending on the model and trim level, you may have limited customization options to choose which information is displayed on the speedometer’s digital screen.
A: The speedometer of the 2020 Ertiga is usually illuminated whenever the vehicle’s ignition is on, allowing for clear visibility of speed and other information.
A: Yes, the speedometer of the 2020 Ertiga often includes warning lights for various vehicle systems, such as engine, battery, oil pressure, and more.
A: The speedometer of the 2020 Ertiga plays a crucial role in providing essential information to the driver, ensuring safe and informed driving at all times.
A: Yes, the speedometer design is typically integrated into the overall interior design of the 2020 Ertiga, maintaining a cohesive and harmonious look.
A: The infotainment system of the 2020 Ertiga might provide additional speed-related information, but this varies depending on the model and features.
Useful Link
View Full User Guide: Suzuki New ERTIGA 2020 User Manual
Suzuki New ERTIGA 2020 Thermometer (if equipped) User Manual