2022 Tesla Model 3 User Manual

The 2022 Tesla Model 3 is the best electric car ever made. It combines cutting-edge technology, a beautiful design, and great speed in a way that is seamless. With its smooth, simple design, the Model 3 attracts attention and shows how aerodynamic economy works. The Model 3 changes what it’s like to drive because it has an electric drivetrain that moves quickly and has a long range on a single charge. Its well-designed cabin, with a big touchscreen interface and advanced driver-assistance systems, makes the cockpit feel immersive and futuristic. As a sign of Tesla’s unwavering dedication to green transportation, the 2022 Model 3 speeds us toward a better and more innovative future for cars.

About Autopilot

1. A camera is mounted above the rear license plate.
2. Ultrasonic sensors (if equipped) are located in the front and rear bumpers.
3. A camera is mounted in each door pillar.
4. Three cameras are mounted to the windshield above the rearview mirror.
5. A camera is mounted to each front fender.
6. Radar (if equipped) is mounted behind the front bumper.

Model 3 is also equipped with high-precision electronically-assisted braking and steering systems.
In addition, the cabin camera can determine driver inattentiveness and provide alerts when Autopilot is engaged. By default, data from the camera does not leave the vehicle itself. In other words, data is not saved or transmitted unless you enable data sharing. To enable data sharing, touch Controls > Software > Data Sharing > Allow Cabin Camera Analytics. Cabin Camera Analytics helps Tesla continue to develop even safer vehicles in the future. See Cabin Camera on page 116.
NOTE: Ensure all cameras and sensors (if equipped) are clean before each drive. See Cleaning Cameras and Sensors on page 80 for more information. Dirty cameras and sensors, as well as environmental conditions such as rain and faded lane markings, can affect Autopilot’s performance.

Active Safety Features
These Active Safety features are designed to increase your safety:

• Lane Assist (see Lane Assist on page 109)
• Collision Avoidance Assist (see Collision Avoidance Assist on page 112)
• Speed Assist (see Speed Assist on page 115)
• Cabin Camera (see Cabin Camera on page 116)
  You can enable/disable some of these features and in some cases, control how they work. To access settings for these features, touch Controls > Autopilot.

Autopilot Features
NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with all features listed below, or a feature may not operate exactly as described.
These Autopilot convenience features are designed to reduce driver workload:

•  Traffic-Aware Cruise Control (see Traffic-Aware Cruise Control on page 81)
• Autosteer (see Autosteer on page 86)
• Auto Lane Change (see Auto Lane Change on page 88)
• Autopark (see Autopark on page 101)
• Summon (see Summon on page 103)
• Smart Summon (Smart Summon on page 106)
• Stop Light and Stop Sign Warning (see Stop Light and Stop Sign Warning on page 89)
• Navigate on Autopilot (see Navigate on Autopilot on page 91)
• Traffic Light and Stop Sign Control (see Traffic Light and Stop Sign Control on page 94)
  You can enable/disable some of these features and in some cases, control how they work. To access settings associated with these features, touch Controls > Autopilot.

Drive to Calibrate Cameras
Model 3 must maneuver with precision when Autopilot features are being used. Therefore, before some features can be used for the first time or after some types of service repairs, cameras must complete a self-calibration process. For your convenience, the touchscreen displays a progress indicator.

When calibration is complete, Autopilot features are available for use. Calibration typically completes after driving 20-25 miles (32-40 km), but the distance varies depending on road and environmental conditions. For example, calibration completes quicker when driving on a straight road with multiple lanes (such as a controlled-access highway), with highly-visible lane markings (in the driving lane as well as the adjacent lanes). Contact Tesla only if your Model 3 has not completed the calibration process after driving 100 miles (160 km) in the described conditions.
If a camera has shifted from its calibrated position (for example, the camera or windshield was replaced), you must clear the calibration. To do so, touch Controls > Service > Camera Calibration > Clear Calibration. When the calibration is cleared, Model 3 repeats the calibration process. While this helps re-calibrate the cameras in many cases, Clear Calibration may not resolve all camera and sensor concerns.
NOTE: To calibrate, cameras require highly-visible lane markings in both the driving lane and adjacent lanes (at least two lanes over on each side of the vehicle). For best results, drive in the middle lane of a multi-lane highway (ideally with at least five lanes) that has clear lane markings and minimal traffic.
NOTE: If you attempt to use a feature that is not available until the calibration process is complete, the feature is disabled and the touchscreen displays a message.
NOTE: Model 3 must repeat the calibration process if the cameras are serviced by Tesla, and in some cases, after a software update.

Limitations

Many factors can impact the performance of Autopilot components, causing them to be unable to function as intended. These include (but are not limited to):

• Poor visibility (due to heavy rain, snow, fog, etc.).
• Bright light (due to oncoming headlights, direct sunlight, etc.).
• Damage or obstructions caused by mud, ice, snow, etc.
• Interference or obstruction by object(s) mounted onto the vehicle (such as a bike rack).
• Obstruction caused by applying excessive paint or adhesive products (such as wraps, stickers, rubber coating, etc.) onto the vehicle.
• Narrow or winding roads.
• A damaged or misaligned body panel.
• Use of gray or aftermarket glass.
• Interference from other equipment that generates ultrasonic waves.
• Extremely hot or cold temperatures.

Cleaning Cameras and Sensors

To ensure the various Autopilot components can provide information that is as accurate as possible, keep them clean and free of obstructions, condensation, or damage (see Cleaning on page 176).
Condensation can form inside the camera enclosures, especially if you park your vehicle outside in cold or wet conditions. The touchscreen may display an alert stating that a camera is blocked and that some or all Autopilot features may be temporarily restricted until the camera vision is clear. To proactively dry the condensation, precondition the cabin by setting it to a warm temperature, turning the windshield defroster on, and directing the front air vents toward the door pillars (see Mobile App on page 156).

CAUTION: Do not wipe an exposed lens with your hands or a cloth in an attempt to remove dirt or debris. The debris can damage the surface of the lens when wiped.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage surfaces.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can scratch or damage its surface.

NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Traffic-Aware Cruise Control, or the feature may not operate exactly as described. If your vehicle is not equipped, refer to the owner’s manual on your vehicle’s touchscreen for instructions on how to use Cruise Control.
NOTE: Traffic-Aware Cruise Control is a BETA feature.
Traffic-Aware Cruise Control determines when there is a vehicle in front of you in the same lane. If the area in front of Model 3 is clear, Traffic-Aware Cruise Control maintains a set driving speed. When a vehicle is detected, Traffic-Aware Cruise Control is designed to slow down Model 3 as needed to maintain a selected time-based distance from the vehicle in front, up to the set speed. Traffic-Aware Cruise Control does not eliminate the need to watch the road in front of you and to manually apply the brakes when needed.
Traffic-Aware Cruise Control is primarily intended for driving on dry, straight roads, such as highways.

To Use Traffic-Aware Cruise Control
To initiate Traffic-Aware Cruise Control when no vehicle is detected ahead of you, you must be driving at least 18 mph (30 km/h), unless certain vehicle and environmental conditions are met, in which case, you may be able to initiate it at lower speeds. If a vehicle is detected ahead of you, you can initiate Traffic-Aware Cruise Control at any speed, even when stationary, provided Model 3 is at least 5 feet (150 cm) behind the detected vehicle and certain vehicle and environmental conditions are met.
NOTE: The maximum cruising speed is 90 mph (150 km/h). It is the driver’s responsibility to cruise at a safe speed based on road conditions and speed limits.
When Traffic-Aware Cruise Control is available but not engaged, the touchscreen displays the cruising speed in gray. The number shown represents the cruising speed that will be set when you engage Traffic-Aware Cruise Control.
When Traffic-Aware Cruise Control is actively cruising at a set cruising speed, the cruising speed is highlighted with blue text.

1. You can choose whether Traffic-Aware Cruise Control engages at the currently detected speed limit or your current driving speed. Touch Controls > Autopilot > Set Speed and choose either Speed Limit or Current Speed. If you choose to engage Traffic-Aware Cruise Control at the currently detected speed limit, you can specify an offset. Touch Set Speed Offset. You can choose a Fixed offset, in which the cruising speed adjusts by a specific number of mph (km/h) on all roads, or a Percentage offset, in which the cruising speed is adjusted as a percentage of the road’s detected speed limit.
2. To engage Traffic-Aware Cruise Control when it is available (the car status area of the touchscreen displays the gray cruising speed icon), move the drive stalk down once, then release the accelerator pedal to allow Traffic-Aware Cruise Control to maintain the cruising speed.
   NOTE: Moving the drive stalk down twice in quick succession engages Autosteer (assuming it has been enabled), which includes Traffic-Aware Cruise Control functionality, as described in Autosteer on page 86).
3.  To change your speed while using Traffic-Aware Cruise Control, you can roll the right scroll wheel on the steering wheel up or down. You can also change the cruising speed to the current speed limit (including any offset you’ve specified), by either long-pressing the drive stalk down, or touching the speed limit sign on the touchscreen. For more details, see Changing the Cruising Speed on page 82.
4. To cancel Traffic-Aware Cruise Control, push the drive stalk up once or press the brake pedal. See Canceling and Resuming on page 84 for more information.

FAQ