2023 Tesla Model S Specifications Guidelines
Unlock the complex world of innovation with the 2023 Tesla Model S Specifications Prize, which is a great trove of information. As you look at every part of this amazing electric car, you can learn about its cutting-edge technology, performance, and environmentally friendly driving. From the interesting performance numbers that show how dynamic it is to the complex details of how it can drive itself, these specs help you understand the Model S in its entirety. With the 2023 Tesla Model S Specifications Prize, you can take a trip into the future of great cars, whether you’re a car fanatic who wants to learn more about the vehicle’s details or a possible buyer who wants to find out what makes it so special.
Identification Labels
Vehicle Identification Number
You can find the VIN at the following locations:
- Touch Controls > Software.
- Stamped on a plate located at the top of the dashboard. Can be seen by looking through the windshield on the driver’s side of the vehicle.
- Printed on the Vehicle Certification label, located on the door pillar. Can be seen when the driver’s door is open.
Emission Control Label
The emission control label is located on the opening face of the liftgate.
NOTE: For vehicles with a model year of 2022 or newer, the emission control label is now located on the inside of the front hood and may not match the label shown.
Vehicle Loading
Vehicle Labeling
It is important to understand your vehicle’s original tire sizes and pressures, and the GVWR (Gross Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating). This information can be found on two labels attached to Model S.
- Tire and Loading Information Label
- Tire Information Label
- Vehicle Certification Label
WARNING: Overloading Model S has an adverse effect on braking and handling, which can compromise your safety or cause damage.
CAUTION: Never store large amounts of liquid in Model S. A significant spill can cause electrical components to malfunction.
Tire and Loading Information Label
The Tire and Loading Information label provides:
- The maximum number of occupant seating positions.
- The maximum vehicle capacity weight.
- The size of the original tires.
- The cold inflation pressures for the original front and rear tires. These pressures are recommended to optimize ride and handling characteristics.
Mexico:
Never change this label, even if you use different tires in the future.
NOTE: If Model S is loaded to its full capacity, double check all tires to ensure they are inflated to their recommended pressure levels.
Vehicle Certification Label
The Vehicle Certification label provides:
- GVWR – Gross Vehicle Weight Rating. The maximum allowable total mass of Model S. This is calculated as the weight of Model S equipped with the heaviest factory selectable options, all passengers, fluids, and cargo.
- GAWR FRT and GAWR RR – Gross Axle Weight Rating for the front and rear axles. The GAWR is the maximum distributed weight that each axle can support.
United States:
Canada:
Mexico:
CAUTION: To prevent damage, never load Model S so that it is heavier than GVWR or exceeds the individual GAWR weights.
Roof Racks
A Model S equipped with a glass roof can carry up to 165 lbs (75 kg) using a Tesla-approved roof rack (see Parts and Accessories ).
Calculating Load Limits
- Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the “Tire and Loading Information” label.
- Determine the combined weight of all occupants that will ride in the vehicle.
- Subtract the combined weight of the occupants from XXX lbs or XXX kg (see Step 1).
- The resulting figure equals the available cargo load capacity. For example, if the “XXX” amount equals 1400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in the vehicle, the amount of available cargo capacity is 650 lbs (1400 ‑ 750 (5 x 150) = 650 lbs) or 295 kg (635 ‑ 340 (5 x 68) = 295 kg).
- Determine the combined cargo weight being loaded on the vehicle. That weight must not exceed the available cargo load capacity calculated in Step 4.
WARNING: Trunks are the preferred places to carry objects. In a collision, or during hard braking and sharp turns, loose items in the cabin could injure occupants.
Example Load Limit Calculations
How much cargo Model S can carry depends on the number and weight of passengers. The following calculated load limit examples assume passengers weigh 150 lbs (68 kg). If passengers weigh more or less, available cargo weight decreases or increases respectively.
Driver and one passenger
| Description | Total |
| Vehicle capacity weight | 954 lbs (433 kg) |
| Subtract occupant weight (2 x 150 lbs/68 kg) | 300 lbs (136 kg) |
| Available cargo weight | 654 lbs (297 kg) |
Driver and four passenger
| Description | Total |
| Vehicle capacity weight | 954 lbs (433 kg) |
| Subtract occupant weight (5 x 150 lbs/68 kg) | 750 lbs (340 kg) |
| Available cargo weight | 204 lbs (93 kg) |
The cargo weight should be distributed as evenly as possible between the front and rear trunks.
CAUTION: Never load more than 110 lbs (50 kg) in the front trunk. Doing so can cause damage.
CAUTION: Never load more than 88 lbs (40 kg) in the lower tub compartment of the rear trunk or more than 287 lbs (130 kg) on the upper floor. Doing so can cause damage.
Dimensions
Exterior Dimensions
| Callout | Description | Measurement (in) | Measurement (mm) |
| A | Overall Length | 197.7 | 5,021 |
|
B |
Overall Width (including mirrors) Overall Width (excluding mirrors) |
86.2 |
2,189 |
|
C |
Overall Height*:
|
56.3 |
1,431 |
| D | Wheel Base | 116.5 | 2,960 |
| E | Overhang – Front | 37.8 | 961 |
| F | Overhang – Rear | 43.3 | 1,100 |
| G |
Ground Clearance*:
|
4.6 |
117 |
| H | Track – Front and Rear | 66.5 | 1,690 |
| Values are approximate and based on 19″ wheels. Values can vary depending on a vehicle’s options and various other factors. When vehicle is in Transport Mode, the suspension is automatically set to the highest setting. |
|||
CAUTION: Depending on configuration (such as suspension height or wheel selection), your vehicle’s liftgate can open up to approximately 7.5 feet (2.3 meters) high. See Adjusting Liftgate Opening Height to adjust the liftgate height and prevent it from coming into contact with low ceilings or other objects.
Interior Dimensions
| Area | Location | Measurement (in) | Measurement (mm) |
| Head Room | Front | 39.7 | 1,008 |
| Rear | 38.1 | 968 | |
| Leg Room | Front | 42.4 | 1,077 |
| Rear | 35.5 | 901 | |
| Shoulder Room | Front | 58.4 | 1,484 |
| Rear | 55.1 | 1,399 | |
| Hip Room | Front | 54.8 | 1,393 |
| Rear | 50.3 | 1,278 |
Cargo Volume
| Area | Volume (liters) | Volume (cubic feet) |
| Front trunk | 89 | 3.1 |
| Behind first row, second row folded flat | 1,739 | 61.4 |
| Behind second row | 709 | 25.0 |
| Maximum total cargo volume with driver and front passenger | 1,828 | 64.6 |
| Maximum total cargo volume with driver and 4 passengers | 798 | 28.2 |
Subsystems
Motor Type
| Motor Type | Model S Model X | Model S Plaid Model X Plaid |
| Front and rear motor | AC permanent magnet synchronous motor, liquid-cooled, with variable frequency drive | AC permanent magnet synchronous motor, carbon- fiber-wrapped rotor, liquid-cooled, with variable frequency drive (2x motors in the rear) |
Transmission
| Type | Model S | Model S Plaid |
| Front transmission | Single speed fixed gear, 7.56:1 | Single speed fixed gear, 7.56:1. Enhanced lubrication |
| Overall Final Drive Ratio | Front unit motor: 7.56:1 Rear unit motor: 9.04:1 | Front unit motor: 7.56:1 Rear unit motor: 7.56:1 |
| Rear transmission | Single speed fixed gear, 9.04:1 | Independent single speed fixed gear, 7.56:1. Dry sump lubrication |
Steering
| Steering | Specifications |
| Type | Variable ratio rack and pinion with electronic power steering, speed sensitive |
| Number of turns lock to lock | 2.33 |
| Turning Circle (curb to curb) | 40.3 ft/12.3 m |
Brakes
| Brakes | Specifications |
| Type | 4-wheel anti-lock braking system (ABS) with Electronic Brake Force Distribution, Integrated Advanced Stability Control and Electronic Accelerator pedal actuated regenerative braking system |
| Calipers | Front: Four piston, fixed |
| Rear: Single piston, floating | |
| Rotor Diameters (ventilated) | Front: 15.59”/395 mm |
| Rear: 14.37”/365 mm | |
|
Front Rotor thickness |
New: 1.26”/32 mm |
| Service limit: 1.18”/30 mm | |
| Rear Rotor thickness | New: 1.10”/28 mm |
| Service limit: 1.02”/26 mm |
| Brakes | Specifications |
| Front Brake Pad Thickness (excluding back plate) | New: 0.41”/10.5 mm (MIN) |
| Service limit: 0.09”/ 2.3 mm | |
| Rear Brake Pad Thickness (excluding back plate) | New: 0.33”/8.5 mm (MIN) |
| Service limit: 0.11”/ 2.7 mm | |
| Parking brake | Electrically actuated parking brake calipers |
Suspension
| Suspension | Specifications |
| Front | Independent, double wishbone, air spring with adaptive damper, stabilizer bar |
| Rear | Independent, multi-link, air spring with adaptive damper, stabilizer bar |
Battery – Low Voltage
| Battery – Low Voltage | Specifications |
| Rating | 6.9 amp hour |
| Voltage | 15.5V |
Battery – High Voltage
| Battery – High Voltage | Specifications |
| Type | Liquid-cooled lithium ion (Li-ion) |
| Nominal Voltage | 407 V DC |
| Temperature Range | Do not expose Model S to ambient temperatures above 149° F (65° C) or below -22° F (-30° C) for more than 24 hours at a time. |
FAQs
The prize entails an in-depth package providing detailed specifications and insights into the features, technology, and capabilities of the 2023 Tesla Model S electric vehicle.
The process for winning the prize will depend on the specific contest or promotion. Refer to the official rules for information on how to participate.
While the specifications offer valuable information, ordering a new vehicle would typically involve direct communication with Tesla’s sales team and referencing the latest model details.
Performance figures could encompass details like acceleration times, top speed, and estimated driving range. Consult the specifications for precise data.
Yes, the specifications should provide information about the vehicle’s charging capabilities, including charge time and estimated range per charging session.
Certainly, the specifications enable you to compare the 2023 Model S with other Tesla models, offering insights into differences in performance, features, and technology.
Yes, the specifications usually cover available color choices, interior options, and material selections.
Absolutely, the specifications are designed to be informative and shareable, allowing you to provide valuable insights to enthusiasts or potential buyers.
The specifications prize focuses on the 2023 Model S. Variations might exist for other model years, so always refer to the correct specifications.
The specifications primarily provide information about features and capabilities. For troubleshooting, consult the vehicle’s manual or contact Tesla support.
Prize terms will dictate whether substitutions or cash alternatives are allowed. Review the official rules for specific information.
To receive the latest information about the specifications prize, visit the official Tesla website, event organizers’ websites, or contact Tesla representatives for details.
Absolutely, the specifications provide valuable insights that can help you understand the capabilities, technology, and features of the 2023 Model S, aiding in your ownership experience.
Yes, the specifications should provide information about the autonomous driving features and capabilities available in the 2023 Model S.
The specifications package is typically standardized. Customization options for specific information might not be part of the prize.
Useful Links:
View Full PDF: 2023 Tesla Model S |Auto User Guide
2023 Tesla Model S Parts and Accessories Guide