2019 Toyota Highlander Multi-mode Display | Screen Setting Guide
A Multi-mode Display is built into the 2019 Toyota Highlander. This gives drivers a flexible and easy-to-use way to control different vehicle settings and functions. With this new feature, you can reach a lot of options through a screen that is easy to use. This makes driving more convenient and efficient. From changing the music settings to making the car’s settings your own, the Multi-mode Display is where you can control most of the Highlander’s functions. The Screen Setting Guide makes it easier for users to customize their driving surroundings to their liking, whether they’re setting up climate control, getting to navigation functions, or fine-tuning driver-assist technologies. The Multi-mode Display, with its easy-to-use interface and wide range of features, shows how committed Toyota is to integrating cutting-edge technology into its cars in a way that makes driving more enjoyable for everyone.
2023 – 2024 Toyota Highlander Review, Price, Features, Mileage (Brochure)
Multi-information display
Display contents
Drive information
Navigation system-linked display (if equipped) Select to
display the following navigation system-linked information.
- Route guidance
- Compass display (north-up display/heading-up display)
Audio system-linked display (if equipped)
Select to enable the selection of an audio source or track on the meter using the meter control switches.
Driving assist system information
Select to display the operational status of the following systems:
- Dynamic radar cruise control
- LDA (Lane Departure Alert with steering control)
Stop & Start system information (if equipped)
Select to display the operational status of the Stop & Start system.
Warning message display
Select to display warning messages and measures to be taken if a malfunction is detected.
Settings display
Select to change the meter display settings.
Operating the meter control switches
- Enter/Set/Reset
- Select an item/change pages
- Return to the previous screen
- Press: Displays the screen registered as the top screen
When no screen has been registered, the drive information screen will be displayed.
Press and hold: Registers the currently displayed screen as the
top screen
When the confirmation screen is displayed, select yes to register the screen. If the selected screen cannot be registered, a registration failure message will be shown.
Drive information
- Current fuel consumption*1
Displays the current rate of fuel consumption - Average fuel economy (after reset*2/after start/after refuel)*1 Displays the average fuel economy since the function was reset, the engine was started, and the vehicle was refuelled, respectively Use the displayed average fuel economy as a reference.
- Average vehicle speed (after reset*2/after start)*1 Displays the average vehicle speed since the function was reset and the engine was started, respectively
- Elapsed time (after reset*2/after start)*1
Displays the elapsed time since the function was reset and the engine was started, respectively - Distance (driving range/after start/after reset*2)*1
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the engine was started, respectively.- This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
- When only a small amount of fuel is added to the tank, the display may not be updated.
When refuelling, turn the engine switch off. If the vehicle is refuelled without turning the engine switch off, the display may not be updated.
- Eco Driving Indicator
- AWD control (if equipped)
Displays the torque distribution between the front and rear axles of the AWD control system - Display off
A blank screen is displayed
- Can be registered to Drive information 1 through 3. Resetting procedures:
- Select a function to be reset using the meter control switches and then press and hold to reset.
- If there is more than one function that can be reset, checkboxes will be displayed next to those functions.
Stop & Start system information (if equipped)
Stop & Start system operation time (current)/status notification Displays the current amount of time the engine has been stopped due to the operation of the Stop & Start system. Also shows the status of the Stop & Start system with a pop-up display.
Stop & Start system operation time (after the start/after reset) Displays the accumulated total of the following:
- Stop & Start system operation time since engine start
- Stop & Start system operation time since the display was reset
Stop & Start system settings
Press the centre button of the meter control switches to display the Stop & Start system settings screen.
On this screen, the following operations can be performed:
- Stop & Start
The length of time the Stop & Start system will operate when the “A/C” switch of the air conditioning system is on can be set to 2 different levels. This setting can also be changed. - Reset
Select to reset the Stop & Start system operation time display.
To reset, move the cursor to “Reset”, and then press and hold the centre button.
Settings display
- Select using the meter control switches.
- Select an item and then set it with the centre button.
LDA (Lane Departure Alert with steering control) settings
PCS (Pre-Collision System) settings
BSM (Blind Spot Monitor) settings (if equipped)
Select to activate/deactivate the BSM (Blind Spot Monitor).
Power mode (driving mode) settings (if equipped)
Select to activate/deactivate the power mode.
Stop & Start system settings (if equipped)
The length of time the Stop & Start system will operate when the “A/C” switch of the air conditioning system is on can be set to 2 different levels.
Meter settings
- Language
Select to change the language on the display. - Units
Select to change the unit of measure for fuel consumption. - Maintenance system (for U.S.A.)
Select to reset the maintenance data after the required maintenance is performed. - Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light. - switch settings
You can register 1 screen as the top screen. To register, press and hold while the desired screen is displayed. - Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive information screen, up to 3 Drive information screens can be set. - Pop-up display
Select to set the following pop-up displays, which may appear in some situations, on/off.- Route guidance display of the navigation system-linked system (if equipped)
- Incoming call display of the hands-free phone system
- Stop & Start system duration (if equipped)
- Stop & Start system status (if equipped)
- Instrument panel brightness adjustment display
- Accent colour
Select to change the accent colours on the screen, such as the cursor colour. - Speed limit display* (if equipped)
Select to set the display of speed limit information stored in the navigation system to on with the speed limit caution indicator (yellow) enabled, on with the speed limit caution not enabled, or off. If enabled, the speed limit caution indicator will come on if the vehicle speed exceeds the displayed speed limit. - Initialization
Registered or changed meter settings will be deleted or returned to their default setting.
Speed limit display may not be available for some regions.
2023 – 2024 Toyota Highlander Review, Price, Features, Mileage (Brochure)
Settings can be changed
Customizable features:
Pop-up display
In some situations, such as when a switch operation is performed, a pop-up display, will be temporarily displayed on the multi-information display.
The pop-up display function can be set on/off.
Setting display automatic cancellation
In the following situations, the setting display in which the settings can be changed through the meter control switch will automatically be turned off.
- When a warning message appears while the setting display is displayed
- When the vehicle begins to move while the setting display is displayed
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
WARNING
- The information displayed at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the display monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to down-shift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury. - Cautions during setting up the display
As the engine needs to be running while setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
- While setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the display features.
FAQs
The Multi-mode Display is a feature that allows drivers to customize various settings and access information through the vehicle’s infotainment system.
You can access the Multi-mode Display by pressing the “Menu” button on the infotainment screen and navigating to the settings menu.
The main functions include adjusting vehicle settings, accessing vehicle information, and customizing the infotainment system.
Yes, you can change the language of the display through the settings menu.
You can adjust the brightness of the screen by accessing the display settings in the settings menu.
Yes, you can customize the home screen layout by selecting the desired widgets and rearranging them according to your preference.
Yes, you can set up a personalized driver profile that stores your preferred settings for things like seat position, mirror adjustment, and audio presets.
You can access information such as fuel economy, trip data, vehicle diagnostics, and navigation instructions.
You can adjust the audio settings by accessing the audio menu on the Multi-mode Display.
Yes, you can connect your smartphone via Bluetooth or USB to access features like hands-free calling, music streaming, and navigation.
Yes, you can customize the settings for various safety features such as lane departure warning and forward collision alert.
Yes, you can adjust the climate control settings, including temperature, fan speed, and airflow direction, through the infotainment system.
Yes, you can enable a night mode for the display, which reduces the brightness and glare for nighttime driving.
Yes, you can customize the wallpaper by selecting from a range of pre-installed options or by uploading your image.
Yes, you can reset the Multi-mode Display to its factory settings through the settings menu.
Useful Links
View Full PDF: Toyota Highlander 2019 User Manual | Auto User Guide
2023 – 2024 Toyota Highlander Review, Price, Features, Mileage (Brochure)