2021 Toyota 4Runner Fuses and Fuse Box | How to fix a blown fuse
The carefully designed fuse box in the 2021 Toyota 4Runner houses a strong and flexible fuse system that protects the vehicle’s electrical parts and ensures it runs at its best overall. These fuses are very important because they protect the different electrical systems in the car from overloading and maybe even damage. Understanding the 2021 Toyota 4Runner’s fuses and their fuse box is important for keeping the vehicle safe and working properly. Any owner of this beloved off-road traveler needs to have a full understanding of this important part of their vehicle.
2023 Toyota 4Runner Specs, Price, Features and Mileage (Brochure)
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec-essary.
- Turn the engine switch off.
- Open the Fuse box cover.
- Engine compartment
Push the tab in and lift the lid off. - Driver’s side instrument panel
Remove the lid.
- Engine compartment
- Remove the fuse with the pull-out tool.
Only type A fuse can be removed using the pullout tool. - Check if the fuse is blown.
- Normal fuse
- Blown fuse
- Type A, B, C, D, E:
Replace the blown fuse with a new fuse of an appropriate amperage rat-ing. The amperage rating can be found on the fuse box lid. - Type F:
Contact your Toyota dealer.
- Type A, B, C, D, E:
2023 Toyota 4Runner Specs, Price, Features and Mileage (Brochure)
After a fuse is replaced
- If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement.
- If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.
If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
- To prevent system breakdowns and vehicle fire
Observe the following precautions. Failure to do so may cause damage to the vehicle, and possibly a fire or injury.- Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse.
- Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix. - Do not modify the fuses or fuse boxes.
NOTICE
- Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.
FAQs
The fuse box in the 2021 Toyota 4Runner serves as a protective housing for fuses, each responsible for specific electrical components in the vehicle.
The location of the fuse box may vary, but it is typically found in accessible areas like the engine compartment or the interior cabin.
Each fuse corresponds to a specific electrical component, such as lights, power windows, the radio, or the air conditioning system.
A blown fuse typically has a visible break in the metal filament inside. You can also use a multimeter or a fuse tester for a more accurate diagnosis.
If a fuse is blown, it should be replaced with one of the same amperage rating to restore the functionality of the affected electrical component.
Yes, replacing a fuse is a relatively simple DIY task. However, if you are unsure or uncomfortable doing it yourself, it’s advisable to seek professional assistance.
Some vehicles may come with spare fuses stored in the fuse box or a designated compartment.
It is not recommended to use a higher-amp fuse, as it may lead to electrical damage or safety hazards. Always replace fuses with the specified amperage rating.
Yes, common electrical issues such as malfunctioning lights, power windows, or the radio may necessitate fuse replacement if other troubleshooting steps do not resolve the problem.
While you cannot completely prevent blown fuses, you can reduce the risk by ensuring that electrical components are in good working order and not overloading the vehicle’s electrical system.
Yes, there is typically a dedicated fuse for the airbag system to ensure its safety and functionality.
You can check the condition of fuses visually by looking for a broken filament, or use a multimeter or fuse tester to determine if they are intact or blown.
Yes, it’s important to disconnect the vehicle’s battery before working with fuses to prevent electrical shock or injury.
Useful Link
View Full PDF: Toyota 4Runner 2021 User Manual
2023 Toyota 4Runner Specs, Price, Features and Mileage (Brochure)
2021 Toyota 4Runner Instrument Cluster Dashboard | How to use