2021 Toyota Sequoia Owner’s Manual

The 2021 Toyota Sequoia is a full-size SUV that shows how rugged flexibility and unwavering dependability can go hand in hand. The Sequoia is a strong vehicle with a strong presence. It can handle both the difficulties of off-road exploration and the needs of transporting a family every day. The Sequoia has a powerful V8 engine that lets it pull a lot of weight and drive with confidence. Its roomy cabin makes it easy to fit passengers and cargo. Modern technology and safety features are built into the Sequoia so that it is always linked and safe to drive. This makes it a reliable companion for both long and short trips. As Toyota’s best SUV, the 2021 Sequoia continues the brand’s tradition of dependability and versatility, making it a good choice for people who want a car that can handle any journey with strength and comfort.

Engine immobilizer system

The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis-tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi-cle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts. The indicator light flashes after the engine switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the engine switch has been turned to ACC or ON to indicate that the system has been can-celed.

• System maintenance
  The vehicle has a maintenance-free type engine immobilizer system.
• Conditions that may cause the system to malfunction
  • If the grip portion of the key is in contact with a metallic object
  • If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle
• Certifications for the engine immobilizer system
  • For vehicles sold in the U.S.A.
    • FCC ID: MOZRI-42BTY
      This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer-ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
    • FCC WARNING:
      Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • For vehicles sold in Canada
    This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ-ing interference that may cause undesired operation of the device.

WARNING

• Certifications for the engine immobilizer system
  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTICE

• To ensure the system operates correctly
  Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

Alarm

The alarm

The alarm uses light and sound to give an alert when an intrusion is detected.
The alarm is triggered in the following situations when the alarm is set:

• A locked door is unlocked or opened in any way other than using the entry function, wireless remote control or mechanical key. (The doors will lock again automatically.)
• The hood is opened.
• Vehicles with the glass breakage sensor: The side windows are tapped or broken.
• The battery is reconnected.

Setting the alarm system
Close the doors and hood, and lock all the doors. The system will be set automatically after 30 sec-onds. The indicator light changes from being on to flashing when the sys-tem is set.

Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarms:

• Unlock the doors.
• Turn the engine switch to ACC or ON, or start the engine. (The alarm will be deactivated or stopped after a few seconds.)
• System maintenance
  The vehicle has a maintenance-free type alarm system.
• Items to check before locking the vehicle
  To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following:
  • Nobody is in the vehicle.
  • The windows and moon roof are closed before the alarm is set.
  • No valuables or other personal items are left in the vehicle.
• Triggering of the alarm
  The alarm may be triggered in the following situations:
  (Stopping the alarm deactivates the alarm system.)
  • A person inside the vehicle opens a door or the hood.
  • The battery is recharged or replaced when the vehicle is locked.
• Alarm-operated door lock
  In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the vehicle:
  • When a person remaining in the vehicle locks the door and the alarm is acti-vated.
  • When the alarm is activated and a person remaining in the vehicle unlocks the door.
  • When recharging or replacing the battery.

NOTICE

• To ensure the system operates correctly
  Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

Warning lights and indicators

The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s vari-ous systems. For the purpose of explanation, the following illustration dis-plays all warning lights and indicators illuminated. The units used on the speedometer and some indicators may differ depending on where the vehicle is sold.

WARNING

• If a safety system warning light does not come on
  Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immedi-ately if this occurs.

Gauges and meters

The displayed content may differ depending on the type of meter.

1. Tachometer
   Displays the engine speed in revolutions per minute
2. Engine oil pressure gauge
   Displays the engine oil pressure
3. Outside temperature display
   Displays the outside temperature within the range of -40 °F (-40 °C) to 122 °F (50 °C). Low outside temperature indicator comes on when the ambient temperature is 37 ° F (3 °C) or lower.
4. Multi-information display
   Presents the driver with a variety of vehicle data (P. 98) Displays warning messages in case of a malfunction (P. 479)
5. Voltmeter
   Displays the charge state
6. Speedometer
   Displays the vehicle speed
7. Odometer/Trip meter switching and trip meter resetting button P. 95
8. Fuel gauge
   Displays the quantity of fuel remaining in the tank
9. Odometer and trip meter display P. 95
10. Shift position and shift range display
11. Displays the selected shift position or selected shift range (P. 220) Engine coolant temperature gauge
12. Displays the engine coolant temperature
13. Instrument panel light control button (P. 96)

Changing the odometer/trip meter display
Pressing the button changes the display change button display as follows.

• Odometer
  Displays the total distance the vehicle has been driven.
• Trip meter A*/trip meter B*
  Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis-play different distances independently. *: Press and hold the display change button to reset.

Instrument panel light control
The brightness of the instrument panel lights can be adjusted. Pressing the button will adjust brightness of the instrument panel light.

Short press: 1 step change of brightness level.
Long press: continues change of brightness level until released.

• The meters and display illuminate when
  The engine switch is in ON.
• Instrument panel brightness adjustment
  When the tail lights are turned on, the display’s brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting.
• Outside temperature display
  • In the following situations, the correct outside temperature may not be dis-played, or the display may take longer than normal to change.
    • When stopped, or driving at low speeds (less than 12 mph [20 km/h])
    • When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
  • When “–” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer.
• Liquid crystal display
  Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

WARNING

• The information display at low temperatures
  Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.
  For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to down-shift again, causing rapid and excessive engine braking and possibly an accident resulting in personal death or injury.

NOTICE

• To prevent damage to the engine and its components
  • Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
  • The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 513)
• Voltmeter
  When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer.
• Engine oil pressure gauge
  When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. (P. 416) When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubri-cation system.

FAQ