2024 Toyota Corolla Cruise Control Instructions
The 2024 Toyota Corolla’s cruise control is a cutting-edge driving feature intended to provide comfort, convenience, and a more laid-back driving experience. This clever system makes it possible for drivers to maintain a set speed without having to continuously depress the accelerator pedal, making long and winding highway trips more comfortable.
Would you want more information about the features and advantages of the Corolla’s cruise control system, or perhaps a tutorial on how to use it?
The vehicle can be driven at a set speed even if the accelerator pedal is not depressed.
Use the cruise control only on highways and express-ways.
WARNING
For safe use
-
Driving safely is solely the responsibility of the driver. Therefore, do not overly rely on this system. The driver is solely responsible for paying attention to the vehicle’s surroundings and driving safely.
-
Set the speed appropriately according to the speed limit, traffic flow, road conditions, weather conditions, etc. The driver is responsible for confirming the set speed.
Situations in which cruise control should not be used
Do not use the cruise control in the following situations. As the system will not be able to provide appropriate control, using it may lead to an accident resulting in death or serious injury.
-
On roads with sharp bends
-
On winding roads
-
On slippery roads, such as those covered with rain, ice or snow
-
On steep downhills, or where there are sudden changes between sharp up and down gradients
WARNING
Vehicle speed may exceed the set speed when driving down a steep hill.
- When it is necessary to disable the system:
System Components
Meter display
- Set vehicle speed
- Cruise control indicator
Switches
- Driving assist mode select switch
- Driving assist switch switch
- RES switch
- switch
- Cancel switch
Using the Cruise Control
Setting the vehicle speed
- Press the driving assist mode select switch to select cruise control.
The cruise control indicator will illuminate.
- Using the accelerator pedal, accelerate to the desired vehicle speed (approximately 20 mph [30 km/h] or more), and press the driving assist switch to set the set vehicle speed.
The vehicle speed at the moment the switch is released will be the set vehicle speed.
Adjusting the set vehicle speed
Adjusting the set vehicle speed using the switches
To change the set vehicle speed, press the switch until the desired speed is displayed.
- Increase set vehicle speed
- Decrease set vehicle speed
The set vehicle speed will increase or decrease as follows:
Fine adjustment: By 1 mph (1.6 km/h) or 1 km/h (0.6 mph) each time the switch is pressed.
Large adjustment: Increases continuously while the switch is pressed and held.
Increasing the set vehicle speed using the accelerator pedal
- Depress the accelerator pedal to accelerate the vehicle to the desired vehicle speed.
- Press the “+” switch.
Canceling/resuming control
- Press the cancel switch or driving assist switch to cancel control.
Control will also be canceled if the brake pedal is depressed. - Press the “RES” switch to resume control.
Automatic cancellation of the cruise control
In the following situations, the cruise control will be canceled automatically:
- When the vehicle speed drops approximately 10 mph (16 km/h) or more below the set vehicle speed
- When the vehicle speed drops below approximately 20 mph (30 km/h
- When the brake control or output restriction control of a driving support system operates (For example: PCS, drive-start control)
- When the parking brake has been operated
- Situations in which some or all of the functions of the system cannot operate:
FAQs
Make sure you’re traveling at the appropriate speed before pressing the cruise control button on the steering wheel to select your desired speed.
Depending on the model, cruise control usually works at speeds above a certain threshold, which is often around 25 mph (40 km/h).
While cruise control is engaged, you can use the steering wheel’s acceleration and deceleration buttons to change the set speed.
The 2024 Corolla’s cruise control system typically keeps the vehicle moving at the designated speed rather than adjusting on its own for slopes or descents. In these circumstances, drivers might need to manually modify their speed.
Yes, you can turn off cruise control by applying pressure to the brakes or by using the steering wheel’s cancel button.
Unless you brake or manually turn it off, the cruise control system usually doesn’t disengage when you use the turn signal.
Pressing the “RES” (resume) button on the steering wheel usually returns the vehicle to its original speed after disabling the cruise control.
Because cruise control may impair vehicle control in inclement weather, such as persistent rain, snow, or icy roads, it is advised to avoid using it.
Adaptive cruise control, which automatically modifies speed to maintain a safe following distance from the car ahead, may be available on some higher trim levels. To access this feature, check the particular trim.
Indeed, you can use cruise control on different types of terrain; however, depending on the state of the road, you might need to manually change the speed.
Useful Link
View Full PDF: 2024 Toyota Corolla Owners Manual| Auto User Guide
2024 Toyota Corolla Steering Wheel | Adjustment procedure