2024 Toyota Corolla

The 2024 Toyota Corolla is expected to maintain its standing as a dependable and effective small car while welcoming cutting-edge improvements. Building on its enduring appeal, the 2019 Corolla is anticipated to have enhanced aerodynamics and a more dynamic exterior appearance. Anticipated improvements include an assortment of driver-assist features that uphold Toyota’s emphasis on safety and a more technologically updated cabin with cutting-edge entertainment and connection options. Given Toyota’s dedication to environmental sustainability, more efficient gasoline and hybrid engine options are probably in store. Ultimately, the goal of the 2024 Corolla is to provide a compelling blend of value, functionality, and contemporary style, positioning it as a top option for people looking for a durable yet stylish car.

Odometer/trip meter

• Odometer
  Displays the total distance the vehicle has been driven.
• Trip meter A/trip meter B
  Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. To reset, display the desired trip meter and press and hold the “ODO/TRIP” switch.

Suggestion function
Displays suggestions to the driver in the following situations. To select a response to a displayed suggestion, use the meter control switches. The suggestion function can be turned on/off. (Customizable features.

• Suggestion to turn off the headlights
  If the headlights are left on for a certain amount of time after the engine switch has been turned off, if the headlight switch is in the “AUTO” position, a suggestion message will be displayed asking if you wish to turn the headlights off. To turn the headlights off, select “Yes”. If a front door is opened after the engine switch is turned off, this sug-gestion message will not be displayed.

Eco Driving Indicator

1. Eco Driving Indicator Light
   During Eco-friendly acceleration (Eco-driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
2. Eco Driving Indicator Zone Display Suggests the Zone of Eco-driving with the current Eco-driving ratio based on acceleration.
   Eco driving ratio based on acceleration If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illu-minate.
3. Zone of eco-driving
   Eco Driving Indicator will not operate under the following conditions:
   • The shift lever is in any position other than D.
      
   • A paddle shift switch (if equipped) is operated.
      
   • Neither normal mode nor Eco drive mode is selected.
      
   • The vehicle speed is approximately 80 mph (130 km/h) or higher.

• Suspension of the settings display
  • Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.
  • If a warning message is displayed, the operation of the settings display will be suspended.
• Tire pressure
  • It may take a few minutes to display the tire inflation pressure after the engine switch is turned to IGNITION ON mode. It may also take a few minutes to display the tire inflation pressure after the inflation pressure has been adjusted.
  • “—” may be displayed if the tire position information cannot be determined due to unfavourable radio wave conditions.
  • Tire inflation pressure changes with temperature. The displayed values may also be different from the values measured using a tire pressure gauge.
• Liquid crystal display
  Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
• Customization
  Some functions can be customized.

WARNING

• Caution for use while driving
  • When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
  • Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
• The information displayed at low temperatures
  Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display. This lag could cause the driver to down-shift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.
• Cautions during setting up the display
  As the engine needs to be running while setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

Information display area
Displays the following items in the appropriate situation:

• Warning/Message
  • Alert from the LTA (Lane Tracing Assist)
  • Dynamic radar cruise control with full-speed range
  • Brake Override System/Drive-Start Control
  • message
    Displayed when a suggestion/advice pop-up display is displayed on the multi-information display.
  • message
    Displayed when a warning message is displayed on the multi-information display.
  • Outside temperature
    Displayed in the following situations:
    • When the engine switch is turned to IGNITION ON mode
    • When the low outside temperature indicator is flashing
  • The displayed content is the same as that displayed on the multi-information display. For details, refer to the explanation of the outside temperature display on the multi-information display.
• Hands-free system status
  Displayed when the hands-free system is operated.
• Audio system operation status
  Displayed when the audio system is operated.
• Head-up display
  The head-up display may seem dark or hard to see when viewed through sunglasses, especially polarized sunglasses. Adjust the brightness of the head-up display or remove your sunglasses.
• Display brightness
  The brightness of the head-up display can be adjusted on of the multi-information display. Also, it is automatically adjusted according to the ambient brightness.
• Enabling/disabling of the head-up display
  If the head-up display is disabled, it will remain disabled when the engine switch is turned off and then back to IGNITION ON mode.
• Street name display (vehicles with a navigation system)
  Only street names which are included in the map data will be displayed.

WARNING

• Before using the head-up display
  • Check that the position and brightness of the head-up display image do not interfere with safe driving. Incorrect adjustment of the image’s position or brightness may obstruct the driver’s view and lead to an accident, resulting in death or serious injury.
  • Do not continuously look at the head-up display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.
• Caution for changing settings of the head-up display
  As the engine needs to be running while changing the settings of the head-up display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
• To prevent damage to components
  • Do not place any drinks near the head-up display projector. If the projector gets wet, electrical malfunctions may result.
  • Do not place anything on or put stickers onto the head-up display projector.
  • Doing so could interrupt head-up display indications.
  • Do not touch the inside of the head-up display projector or thrust sharp edges or the like into the projector.
  • Doing so could cause mechanical malfunctions.
• When changing the settings of the head-up display
  To prevent battery discharge, ensure that the engine is running while changing the settings of the head-up display.

My Settings

Drivers are identified using devices such as electronic keys to store the vehicle settings for each. Then the information can be recalled the next time the vehicle is driven. Authentication devices can be assigned in advance to drivers so that they can drive using their preferred settings. Settings for 3 drivers can be stored in My Settings. For information on authentication devices registration/deletion, changing the driver’s name, initializing driver registered settings, manually switching drivers and deleting driver registration refer to the “MULTI-MEDIA OWNER’S MANUAL”.

Types of assigned authentication devices
An individual can be identified using the following authentication devices.

• Electronic key (vehicles with smart system)

An individual is identified when the smart key system detects their electronic key.

• Bluetooth® device
  An individual is identified when a Bluetooth® device is connected to the audio system. For information on how to connect Bluetooth® devices, refer to the “MULTIMEDIA OWNER’S MANUAL”. When an individual is identified with an electronic key using a Bluetooth® device is not performed.

Recalled functions
When an individual is identified from an authentication device, settings for the following functions are recalled.

• Meter displays and audio system information*
• When an individual is identified, the display settings used when the engine switch was last turned off are recalled.
• Vehicle settings that can be set using the audio system*

When an individual is identified, the vehicle settings used when the engine switch was last turned off are recalled.

Driving the vehicle
The following procedures should be observed to ensure safe driving:

Driving procedure

• Starting the engine
• Driving
   
  1. With the brake pedal depressed, shift the shift lever to D.
  2. Release the parking brake.
     If the parking brake is in automatic mode, the parking brake will be released automatically.
  3. Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
• Stopping
  1. With the shift lever in D, depress the brake pedal.
  2. If necessary, set the parking brake.
  3. If the vehicle is to be stopped for an extended period, shift the shift lever to P.
• Parking the vehicle
  1. With the shift lever in D, depress the brake pedal to stop the vehicle completely.
  2. Set the parking brake, and shift the shift lever to P.
  3. Make sure the parking brake indi-cator light is on.
  4. Do not press the shift release button after shifting the shift lever to P.
     1. Vehicles without a smart key system: Turn the engine switch to OFF to stop the engine.
     2. Vehicles with a smart key system: Press the engine switch to stop the engine.
  5. Slowly release the brake pedal.
  6. Lock the door, making sure that you have the key on your person. If parking on a hill, block the wheels as needed.
• Starting off on a steep uphill
  1. Make sure that the parking brake is set and shift the shift lever to D.
  2. Gently depress the accelerator pedal.
  3. Release the parking brake.
• Driving in the rain
  • Drive carefully when it is raining, because visibility will be reduced, the windows may become fogged up, and the road will be slippery.
  • Drive carefully when it starts to rain because the road surface will be especially slippery.
  • Refrain from high speeds when driving on an expressway in the rain, because there may be a layer of water between the tires and the road surface, preventing the steering and brakes from operating properly.

Engine speed while driving
In the following conditions, the engine speed may become high while driving. This is due to auto-matic up-shifting control or down-shifting implementation to meet driving conditions. It does not indicate sudden acceleration.

• The vehicle is judged to be driving uphill or downhill
• When the accelerator pedal is released
• When the brake pedal is depressed while sport mode is selected (if equipped)

Restraining the engine output (Brake Override System)

• When the accelerator and brake pedals are depressed at the same time, the engine output may be restrained.
• A warning message is displayed on the multi-information display while the system is operating.

Breaking in your new Toyota
To extend the life of the vehicle, observing the following precautions is recommended:

• For the first 186 miles (300 km): Avoid sudden stops.
• For the first 621 miles (1000 km):
  • Do not drive at extremely high speeds.
  • Avoid sudden acceleration.
  • Do not drive continuously in low gear.
  • Do not drive at a constant speed for extended periods.

FAQ

Useful Link

2018 Toyota 4Runner Owner’s Manual

2024 Toyota Camry User Manual