2024 Toyota Tundra Seats Adjustment Guide

2024 Toyota Tundra Seats Adjustment Owner’s Manual

With the 2024 Toyota Tundra‘s cutting-edge seat adjustment technology, which provides customized support for every trip, enjoy next-level comfort. Find the ideal driving position with ease thanks to the adjustable settings, ergonomic design, and simple controls. With unmatched luxury and convenience, elevate your ride in the brand-new Tundra.

2023 – 2024 Toyota Tundra Review Specs, Price And Mileage (Brochure)

Toyota Front Seat Guide

The seats can be adjusted (longitudinally, vertically, etc.). Adjust the seat to ensure the correct driving posture.

Adjustment procedure

• Manual seat
  • Seat position adjustment
  • Seatback angle adjustment
• Power seat
  • Seat position adjustment
  • Seatback angle adjustment
  • Seat cushion (front) angle adjustment
  • Vertical height adjustment
  • Seat cushion length adjustment (if equipped)
  • Lumbar support height adjustment (if equipped)
  • Lumbar support adjustment

When adjusting the seat

• Make sure that any surrounding passengers or objects are not in contact with the seat.
• Take care when adjusting the seat so that the head restraint does not touch the ceiling.

Power easy access system (if equipped)
The driver’s seat and steering wheel move by engine switch mode and the driver’s seat belt condition.

WARNING

When adjusting the seat position

• Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.
• Do not put your hands under the seat or near the moving parts to avoid injury.
  Fingers or hands may become jammed in the seat mechanism.
• Make sure to leave enough space around the feet so they do not get stuck.

Seat adjustment

• To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary.
  If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact with the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
  Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.
• Manual seat only: After adjusting the seat, make sure that the seat is locked in position.

Rear seats

The seatbacks of the rear seats can be folded down. The bottom cushion can be raised.

Folding down and returning the rear seatbacks

Folding down the rear seatbacks

1. Move the front seats forward.
2. Stow the rear armrest. (if equipped)
3. Stow the rear seat belt buckles and the rear centre seat belt.
4. Use the seat belt hangers to prevent the belts from being tangled.
5. Lower the head restraint on the rear centre seat to the lowest position and fold the head restraints on the rear outboard seats.
6. Pull the seatback lock release strap and fold the seatback down.
   Each seatback may be folded separately.
   
   

Returning the rear seatbacks

1. Raise the rear seat back until it locks.
   Check that the seat belts are not twisted or caught in the seatback.
2. Returning the head restraints on the rear outboard seats to the original position.

WARNING
Observe the following precau-tions. Failure to do so may result in death or serious injury.

When folding the rear seat-backs down

• Do not fold the seatbacks down while driving.
• Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
• Do not allow anyone to sit on a folded seatback while driving.
• Do not allow anyone to sit on the rear centre seat if the rear right seat is folded down, as the seat belt buckle for the rear centre seat belt is then concealed under the folded seat and cannot be used.
• Be careful not to get your hand caught when folding the rear seatbacks.
• Adjust the position of the front seats before folding down the rear seatbacks so that the front seats do not interfere with the rear seatbacks when folding down the rear seatbacks.

After returning the rear seat-back to the upright position

• Make sure that the seatback is securely locked in position by lightly pushing it back and forth. If the seatback is not securely locked, the red marking will be visible on the seatback lock release strap. Make sure that the red mark is not visible.
  
  
• Check that the seat belts are not twisted or caught in the seatback.

Raising and returning the bottom cushions

Raising the bottom cush-ions

1. Move the front seats forward.
2. Stow the rear armrest. (if equipped)
3. Stow the rear seat belt buckles.
   
   
4. Use the seat belt hangers to prevent the belts from being tangled.
   
   
5. Raise the bottom cushion until it locks.
   Each bottom cushion may be raised separately.
   
   

Returning the bottom cushions
Pull and release the strap, then carefully lower the bottom cushion using your other hand.
Check that the seat belts are not twisted or caught in the seatback.

WARNING
Observe the following precau-tions. Failure to do so may result in death or serious injury.

When raising the bottom cushion

• Do not raise the bottom cushion while driving.
• Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
• Do not allow anyone to sit on the storage box while driving.

WARNING

• Do not allow anyone to sit on the rear centre seat if the rear right seat is raised, as the seat belt buckle for the rear centre seat belt is then concealed on the bottom cushion and cannot be used.
• Adjust the position of the front seats before raising the bottom cushions so that the front seats do not interfere with the bottom cushion when raising the bottom cushion.

When returning the bottom cushions

• Be careful not to get your hands or feet pinched in the seat.
• Check that the seat belts are not twisted or caught in the bottom cushions.

Driving position memory

If Equipped
This feature automatically adjusts the positions of the driver’s seat, steering wheel and outside rearview mirrors to make entering and exiting the vehicle easier or to suit your preferences.
Two different driving positions can be recorded.
Each electronic key can be registered to recall your preferred driving position.

Enabling easier driver entry and exit (power easy access system)
The driver’s seat and steering wheel are automatically adjusted to allow the driver to enter and exit the vehicle easily.
When all of the following have been performed, the driver’s seat and steering wheel are automatically adjusted to a position that allows the driver to enter and exit the vehicle easily.

• The shift lever has been shifted to P.
• The engine switch has been turned off.
• The driver’s seat belt has been unfastened.
  When any of the following has been performed, the driver’s seat and steering wheel automatically return to their original positions.
  • The engine switch has been turned to ACC or ON.
    The driver’s seat belt has been fastened.

Operation of the power easy access system
When exiting the vehicle, the power easy access system may not operate if the seat is already close to the rear position, etc.

Customization
Some functions can be customized.

Recording/recalling a driving position

Recording procedure

1. Check that the shift lever is in P.
2. Turn the engine switch to ON.
3. Adjust the driver’s seat, steering wheel and outside rearview mirrors to the desired positions.
4. While pressing the “SET” button, or within 3 seconds after the “SET” button is pressed, press button “1” or “2” until the buzzer sounds.

If the selected button has already been preset, the previously recorded position will be overwritten.

Recall procedure

1. Check that the shift lever is in P.
2. Turn the engine switch to ON.
3. Press one of the buttons for the driving position you want to recall until the buzzer sounds.

To stop the position recall operation part-way through
Perform any of the following operations:

• Press the “SET” button.
• Press button “1” or “2”.
• Operate any of the seat adjustment switches (only cancel seat position recall).
• Operate the tilt and telescopic steering control switch (only can-cels steering wheel position recall).

Seat positions that can be memorized
The positions adjusted by the following procedure can be recorded:

• Seat position adjustment
• Seatback angle adjustment
• Seat cushion (front) angle adjustment
• Vertical height adjustment

Operating the driving position memory after turning the engine switch off
Recorded seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again.

To correctly use the driving position memory func-tion
If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled.

When recalling the driving position
Take care when recalling the driving position so that the head restraint does not touch the ceiling.

When the recorded seat position cannot be recalled
The seat position may not be recalled in some situations when the seat position is recorded in a certain range. For details, contact your Toyota dealer.

WARNING

Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel.

2023 – 2024 Toyota Tundra Review Specs, Price And Mileage (Brochure)

Registering/recall/cancel-ing a driving position to an electronic key (memory recall function)

Registering procedure

Record your driving position to button “1” or “2” before performing the following:
Carry only the key you want to register, and then close the driver’s door.
If 2 or more keys are in the vehi-cle, the driving position cannot be recorded properly.

1. Check that the shift lever is in P.
2. Turn the engine switch to ON.
3. Recall the driving position that you want to record.
4. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds.

If the driving position cannot be registered, the buzzer sounds continuously for approximately 3 seconds.

Recall procedure

1. Make sure that the doors are locked before recalling the driving position. Carry the electronic key that has been registered to the driving position, and then unlock and open the driver’s door using the smart key system wireless remote control.
   The driving position will move to the recorded position (not including the steering wheel). However, the seat will move to a position slightly behind the recorded position to make entering the vehicle easier.
   If the driving position is in a position that has already been recorded, the seat and outside rearview mirrors will not move.
2. Turn the engine switch to ACC or ON, or fasten a seat belt.
   The seat and steering wheel will move to the recorded position.

Cancellation procedure
Carry only the key you want to cancel and then close the driver’s door.
If 2 or more keys are in the vehi-cle, the driving position cannot be cancelled properly.

1. Check that the shift lever is in P.
2. Turn the engine switch to ON.
3. While pressing the “SET” button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice.
   If the driving position cannot be cancelled, the buzzer sounds continuously for approximately 3 sec-onds.

Recalling the driving position using the memory recall func-tion

• Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried.
• If a door other than the driver’s door is unlocked with the smart key system, the driving position cannot be recalled. In this case, press the driving position button which has been set.

Customization
Some functions can be customized.

Head restraints

Head restraints are provided for all seats.

WARNING

Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.

• Use the head restraints designed for each respective seat.
• Adjust the head restraints to the correct position at all times.
• After adjusting the head restraints, push down on them and make sure they are locked in position.
• Do not drive with the head restraints removed.

Adjusting a head restraint

Front seats

1. Up
   Pull the head restraints up.
2. Down
   Push the head restraint down while pressing the lock release button.

Rear seats

Center

1. Up
   Pull the head restraints up.
2. Down
   Push the head restraint down while pressing the lock release button

Outer

1. To use
   Lift the head restraint back to the neutral position and then push the head restraint down.
2. To fold
   Lift the head restraint while pressing the right lock release but-
   ton, and fold it forward.

Adjusting the height of the head restraints (front seat)
Make sure that the head restraints are adjusted so that the centre of the head restraint is closest to the top of your ears.

Adjusting the rear centre seat head restraint
Always raise the head restraint one level from the stowed position when using.

Removing the head restraints

• Front seats
  Pull the head restraint up while pressing the lock release button.
  If the head restraint touches the ceiling, making the removal difficult, change the seat height or angle.
• Rear seats
  Pull the head restraint up while pressing the lock release button
• Outer
  Pull the head restraint up while pressing both lock-release buttons 
  

Installing the head restraints

Front seats
Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.

Rear seats

• Center
  Align the head restraint with the installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
  
• Outer
  Align the head restraint with the installation holes and push it down to the lock position.

FAQs

Useful Links

View Full PDF: 2024 Toyota Tundra Owners Manual | Auto User Guide

2023 – 2024 Toyota Tundra Review Specs, Price And Mileage (Brochure)

2024 Toyota Tundra LCD Display Guide