Toyota Camry 2023 Opening, closing the windows 

The 2023 Toyota Camry has been carefully built to be comfortable and convenient. The art of comfort and convenience goes beyond the cabin’s elegant interior and into nature with its power-operated windows. These windows are like doors to the outside world in modern cars. They easily meet the needs of both the driver and the passengers. The fact that the Camry’s window technology works so well together shows that the company is always working to make driving better. With a touch or the push of a button, the power windows can be easily opened to create a comfortable environment, let in a gentle breeze, or create a peaceful haven. It’s a dance between people and machines, and the Camry’s power windows make every trip an expression of personal comfort and a harmonious fusion of modern technology with the open road. This sedan’s place at the top of the automotive excellence ladder is further solidified.

2023 Toyota Camry Specs, Price, Features and Mileage (Brochure)

Power windows

Opening and closing procedures

The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows:

• Closing
• One-touch closing*
• Opening
• One-touch opening*

To stop the window partway, operate the switch in the opposite direction.

Preventing accidental operation (window lock switch)

This function can be used to prevent children from accidentally opening or closing a passenger window.

Press the switch.
The indicator will come on and the passenger windows will be locked. The passenger windows can still be opened and closed using the driver’s switch even if the lock switch is on.

The power windows can be operated when

• Vehicles without a smart key system
  • The engine switch is in the “ON” position.
• Vehicles with a smart key system
  • The engine switch is in IGNITION ON mode

Operating the power windows after turning the engine off

Vehicles without a smart key system
The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. They cannot, however, be operated once either front door is opened.

Vehicles with a smart key system
The power windows can be operated for approximately 45 seconds even after the engine switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.

Jam protection function
If an object becomes jammed between the window and the window frame while the window is closing, window movement is stopped and the window is opened slightly.

Catch protection function
If an object becomes caught between the door and window while the window is opening, window movement is stopped.

When the window cannot be opened or closed
When the jam protection function or catch protection function operates unusually and the door window cannot be opened or closed, perform the following operations with the power window switch of that door.

Vehicles without a smart key system:

Stop the vehicle. With the engine switch in the “ON” position, within 4 seconds of the jam protection function or catch protection function activating, continuously operate the power window switch in the one-touch closing direction or one-touch opening direction so that the door window can be opened and closed. Vehicles with a smart key system: Stop the vehicle. With the engine switch in IGNITION ON mode, within 4 seconds of the jam protection function or catch protection function activating, continuously operate the power window switch in the one-touch closing direction or one-touch opening direction so that the door window can be opened and closed.

If the door window cannot be opened and closed even when performing the above operations, perform the following procedure for function initialization.

• Vehicles without a smart key system:
• Turn the engine switch to the “ON” position.
• Vehicles with a smart key system:
• Turn the engine switch to IGNITION ON mode.
• Pull and hold the power window switch in the one-touch closing direction and completely close the door window.
• Release the power window switch for a moment, resume pulling the switch in the one-touch closing direction, and hold it there for approximately 6 seconds or more.
• Press and hold the power window switch in the one-touch opening direction.
• After the door window is completely opened, continue holding the switch for an additional 1 second or more. Release the power window switch for a moment, resume pushing the switch in the one-touch opening direction, and hold it there for approximately 4 seconds or more.
• Pull and hold the power window switch in the one-touch closing direction again. After the door window is completely closed, continue holding the switch for a further 1 second or more.

If you release the switch while the window is moving, start again from the beginning. If the window reverses and cannot be fully closed or opened, have the vehicle inspected by your Toyota dealer.

Door lock linked window operation

• Vehicles without a smart key system: The power windows can be opened and closed using the key. Vehicles with a smart key system:
• The power windows can be opened and closed using the mechanical key.
• The power windows can be opened using the wireless remote control.
• These settings must be customized at your Toyota dealer.

Alarm
The alarm may be triggered if the alarm is set and a power window is closed using the door lock-linked power window operation function. 

Power windows open warning buzzer
A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s door is opened with the power windows open.

Customization
Some functions can be customized. 

WARNING

• Observe the following precautions. Failure to do so may result in death or serious injury.
• Closing the windows
• The driver is responsible for all the power window operations, including the operation for the passengers.
• In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
• It is possible for children and other passengers to have body parts caught in the power window.
• Also, when riding with a child, it is recommended to use the window lock switch
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
• When using the wireless remote control, key or mechanical key and operating the power windows, operate the power window after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the window.
• Also do not let a child operate the window by the wireless remote control, key or mechanical key.
• It is possible for children and other passengers to get caught in the power window.
• When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child.
• There may be accidental operations, due to mischief, etc., that may possibly lead to an accident.
• Jam protection function
• Never use any part of your body to intentionally activate the jam protection function.
• The jam protection function may not work if something gets jammed just before the window is fully closed. Be careful not to get any part of your body jammed in the window.
• Catch protection function
• Never use any part of your body or clothing to intentionally activate the catch protection function.
• The catch protection function may not work if something gets caught just before the window is fully opened. Be careful not to get any part of your body or clothing caught in the window.

Moon roof

Use the overhead switches to open and close the moon roof and tilt it up and down.

Opening and closing

• Opens the moon roof*
• The moon roof stops slightly before the fully open position to reduce wind noise.
• Press the switch again to fully open the moon roof.
• Closes the moon roof*
• Lightly press either side of the moon roof switch to stop the moon roof partway.

Tilting up and down

• Tilts the moon roof up*
• Tilts the moon roof down*

Lightly press either side of the moon roof switch to stop the moon roof partway.

The moon roof can be operated when

• Vehicles without a smart key system
  • The engine switch is in the “ON” position.
• Vehicles with a smart key system
  • The engine switch is in IGNITION ON mode.

Operating the moon roof after turning the engine off
Vehicles without a smart key system
The moon roof can be operated for approximately 45 seconds after the engine switch is turned to the “ACC” or “LOCK” position. It cannot, however, be operated once either front door is opened
Vehicles with a smart key system
The moon roof can be operated for approximately 45 seconds after the engine switch is turned to ACCESSORY mode or turned off. It cannot, however, be operated once either front door is opened.

Jam protection function
If an object is detected between the moon roof and the frame while the moon
roof is closing or tilting down, travel is stopped and the moon roof opens slightly.

Sunshade
The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened.

Door lock linked moon roof operation

• Vehicles without a smart key system: The moon roof can be opened and closed using the key.*
• Vehicles with a smart key system: The moon roof can be opened and closed using the mechanical key.*
• The moon roof can be opened using the wireless remote control.*
  These settings must be customized at your Toyota dealer.

2023 Toyota Camry Specs, Price, Features and Mileage (Brochure)

When the moon roof does not close normally
Perform the following procedure:
If the moon roof closes but then re-opens slightly

• Stop the vehicle.
• Press and hold the “CLOSE” switch
  The moon roof will close, reopen and pause for approximately 10 seconds.Then it will close again, tilt up and pause for approximately 1 second. Finally, it will tilt down, open and close.
  Check to make sure that the moon roof is completely closed and then release the switch.
  If the moon roof tilts down but then tilts back up

• Stop the vehicle.
• Press and hold the “UP” switch*1 until the moon roof moves into the tilt up position and stops.
• Release the “UP” switch once and then press and hold the “UP” switch again.
• The moon roof will pause for approximately 10 seconds in the tilt up position.
• Then it will adjust slightly and pause for approximately 1 second. Finally, it will tilt down, open and close.
• Check to make sure that the moon roof is completely closed and then release the switch.

1. If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning.
2. If the switch is released after the above-mentioned 10-second pause, automatic operation will be disabled.

In that case, press and hold the “CLOSE” or “UP” switch, and the moon roof will tilt up and pause for approximately 1 second. Then it will tilt down, open and close. Check to make sure that the moon roof is completely closed and then release the switch. If the moon roof does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.

Alarm
The alarm may be triggered if the alarm is set and the moon roof is closed using the door lock linked moon roof operation function. 

Moon roof open warning buzzer
A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s door is opened with the moon roof open.

Customization
Some functions can be customized. 

WARNING

• Observe the following precautions.
• Failure to do so may cause death or serious injury.
• Opening the moon roof
• Do not allow any passengers to put their hands or heads outside the vehicle while it is moving.
• Do not sit on top of the moon roof.
• Closing the moon roof
• The driver is responsible for moon roof opening and closing operations.
• In order to prevent accidental operation, especially by a child, do not let a child operate the moon roof. It is possible for children and other passengers to have body parts caught in the moon roof.
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the moon roof is being operated.
• When using the wireless remote control, key or mechanical key and operating the moon roof, operate the moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the moon roof. Also, do not let a child operate moon roof by the wireless remote control, key or mechanical key.
• It is possible for children and other passengers to get caught in the moon roof.
• When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.

Jam protection function

• Never use any part of your body to intentionally activate the jam protection function.
• The jam protection function may not work if something gets caught just before the moon roof is fully closed. Also, the jam protection function is not designed to operate while the switch is being pressed. Take care so that your fingers, etc. do not get caught.

Panoramic moon roof

Use the overhead switches to operate the panoramic moon roof and electronic sunshade.

Opening and closing the electronic sunshade

1. Opens the electronic sunshade
   1. Slide and hold the switch backwards. The electronic sunshade will fully open automatically.*
2. Closes the electronic sunshade
   1. Slide and hold the switch forward.
   2. The electronic sunshade will fully close automatically.*
   3. Quickly slide and release the switch in either direction to stop the electronic sunshade partway.

Tilting the panoramic moon roof up and down

Tilts the panoramic moon roof up (press)* When the panoramic moon roof is tilted up, the electronic sunshade will open to the half-open position of the roof.  Lightly press the switch again to stop the panoramic moon roof partway. Tilts the panoramic moon roof down (press and hold) The panoramic moon roof can be tilted down only when it is in the tilt-up position.

Opening and closing the panoramic moon roof

Opens the panoramic moon roof* Slide and hold the switch backwards. The panoramic moon roof and electronic sunshade will open automatically. The panoramic moon roof can be opened from the tilt-up position.  Quickly slide and release the switch in either direction to stop the panoramic moon roof partway. Closes the panoramic moon roof Slide and hold the switch forward. The panoramic moon roof will fully close automatically

The panoramic moon roof can be operated when
The engine switch is in IGNITION ON mode.

Operating the panoramic moon roof after turning the engine off
The panoramic moon roof and electronic sunshade can be operated for approximately 45 seconds after the engine switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.

Jam protection function
If an object is detected between the panoramic moon roof and the frame in the following situations, travel is stopped and the panoramic moon roof opens slightly:

• The panoramic moon roof is closing or tilting down.
• The electronic sunshade is closing.

Door lock linked panoramic moon roof operation

• The panoramic moon roof can be opened and closed using the mechanical key.*
• The panoramic moon roof can be opened using the wireless remote control.*
• These settings must be customized at your Toyota dealer.

Closing both the panoramic moon roof and electronic sunshade
Slide the switch forward. The electronic sunshade will close to the half-open position and pause. The panoramic moon roof will then fully close. Then the electronic sunshade will fully close.

When the panoramic moon roof or electronic sunshade does not close normally

Perform the following procedure:

1. Stop the vehicle.
2. Turn the engine switch to IGNITION ON mode.
3. Slide and hold the switch or switch forward. Continue pressing the switch for approximately 10 seconds after the panoramic moon roof or electronic sunshade closes and reopens. The panoramic moon roof and electronic sunshade will start to close.*
4. Check that the panoramic moon roof and electronic sunshade are fully closed and release the switch.

If the switch is released at the incorrect time, the procedure will have to be performed again from the beginning. If the panoramic moon roof or electronic sunshade does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.

Alarm
The alarm may be triggered if the alarm is set and the panoramic moon roof is closed using the door lock linked panoramic moon roof operation function

Panoramic moon roof open warning buzzer
A buzzer sounds and a message is shown on the multi-information display in the instrument cluster when the engine switch is turned off and the driver’s door is opened with the panoramic moon roof open.

Customization
Some functions can be customized. 

WARNING

• Observe the following precautions.
• Failing to do so may cause death or serious injury.
• Opening and closing the electronic sunshade
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the electronic sunshade is being operated.
• Do not let a child operate the electronic sunshade. Closing the electronic sunshade on someone can cause death or serious injury.
• Opening and closing the panoramic moon roof
• The driver is responsible for panoramic moon roof opening and closing operations.
• In order to prevent accidental operation, especially by a child, do not let a child operate the panoramic moon roof.
• It is possible for children and other passengers to have body parts caught in the panoramic moon roof.
• Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the panoramic moon roof is being operated.
• When using the wireless remote control or mechanical key and operating the panoramic moon roof, operate the panoramic moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the panoramic moon roof. Also, do not let a child operate the panoramic moon roof by the wireless remote control or mechanical key.
• It is possible for children and other passengers to get caught in the panoramic moon roof.
• When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child.
• There may be accidental operations, due to mischief, etc., that may possibly lead to an accident.

WARNING

• Jam protection function
• Never use any part of your body to intentionally activate the jam protection function.
• The jam protection function may not work if something gets caught just before the panoramic moon roof or electronic sunshade is fully closed.
• Also, the jam protection function is not designed to operate while the switch is being pressed. Take care so that your fingers, etc. do not get caught.
• To prevent burns or injuries
• Do not touch the area between the underside of the panoramic moon roof and the electronic sunshade. Your hand may get caught and you could injure yourself.
• Also, if the vehicle is left in direct sunlight for a long time, the underside of the panoramic moon roof could become very hot and could cause burns.

NOTICE

• To prevent damage to the panoramic moon roof
• Before opening the panoramic moon roof, make sure that there are no foreign objects, such as stones or ice, around the opening.
• Do not hit the surface or edge of the panoramic moon roof with hard objects.
• Do not continuously press the switch after the panoramic moon roof has been fully opened or closed.
• After the vehicle has been washed or rained on
• Before opening the panoramic moon roof, wipe any water off the panoramic moon roof. Otherwise, water may enter the cabin when the panoramic moon roof is opened.

FAQ