Dashboard Cluster: 2019 Toyota Highlander Warning Indicators Guide
The 2019 Toyota Highlander’s dashboard cluster is an important link between the driver and the car’s different systems. It gives the driver important information and alerts to make the driving experience safe and efficient. This cluster usually has several warning lights that are meant to let the driver know when something might be wrong with the car. These indicators show a wide range of problems, from the performance of the engine and the pressure in the tyres to the safety systems and the diagnosis of the car. Understanding what these warning lights mean is important for fixing any problems quickly and keeping the Toyota Highlander running at its best. By paying attention to what the dashboard cluster tells them, drivers can keep their cars running smoothly by fixing problems before they get worse and avoiding damage.
2023 – 2024 Toyota Highlander Review, Price, Features, Mileage (Brochure)
Warning lights and indicators
The warning lights and indicators on the instrument cluster and centre panel inform the driver of the status of the vehicle’s various systems.
For explanation, the following illustration displays all warning lights and indicators illuminated.
The units used on the meters and some indicators may differ depending on the target region.
Warning lights
Warning lights inform the driver of malfunctions in the indicated vehicle’s systems.
- These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart key system) or the engine switch is turned to IGNITION ON mode (vehicles with a smart key system), to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer.
- If Equipped
- This light flashes to indicate a malfunction.
- This light illuminates the centre panel.
- This light flashes to indicate a malfunction. Additionally, it will turn on if the system is turned off.
Indicators
The indicators inform the driver of the operating state of the vehicle’s various systems.
- These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart key system) or the engine switch is turned to IGNITION ON mode (vehicles with a smart key system), to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer.
- If Equipped
- Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
- This light flashes to indicate that the system is operating.
- The light comes on when the system is turned off.
- To confirm the operation, the BSM outside rear view mirror indicators illuminate in the following situations:
- Vehicles without a smart key system
- When the BSM function is enabled on the multi-information display, the engine switch is turned to the “ON” position.
- When the engine switch is in the “ON” position, the BSM function is enabled on the multi-information display.
- Vehicles with a smart key system
- When the BSM function is enabled on the multi-information display, the engine switch is turned to IGNITION ON mode.
- When the engine switch is in IGNITION ON mode, the BSM function is enabled on the multi-information display.
If the system is functioning correctly, the BSM outside rear-view mirror indicators will turn off after a few seconds.
If the BSM outside rear-view mirror indicators do not illuminate or do not turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
- Vehicles without a smart key system
- This light illuminates the outside rear-view mirrors.
- This light illuminates the centre panel.
- This light does not turn on when the system is disabled.
WARNING
- If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning lights not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
2023 – 2024 Toyota Highlander Review, Price, Features, Mileage (Brochure)
Gauge and meters
The displayed content may differ depending on the type of meter.
- Tachometer
Displays the engine speed in revolutions per minute - Multi-information display
Presents the driver with a variety of driving-related data. - Speedometer
- Fuel gauge
- Trip meter reset knob
Switches the trip information. - Outside temperature
- Odometer/trip meter/Stop & Start system operation time display*
- Shift position and shift range
Displays the selected shift position or selected shift range. (P. 233) - Instrument panel light control button
- Engine coolant temperature gauge
Displays the engine coolant temperature. *: If equipped
Changing the trip meter display
Switches between the trip meter “A” and “B” displays. When the trip meter is displayed, pressing and holding the knob will reset the trip meter.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted. Pressing the button will adjust the brightness of the instrument panel lights. The brightness level of the meters when the surroundings are bright (day mode) and dark (night mode) can be adjusted individually. However, when in day mode, adjusting the brightness level will also change the brightness level in night mode.
The meters and display illuminate when
- Vehicles without a smart key system The engine switch is in the “ON” position.
- Vehicles with a smart key system The engine switch is in IGNITION ON mode.
Outside temperature display
In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change:
- When stopped, or driving at low speeds (less than 12 mph [20 km/h])
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
Stop & Start system operation time (current) (if equipped)
This display will be displayed when the engine is stopped due to the operation of the Stop & Start system.
NOTICE
- To prevent damage to the engine and its components
- Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
- The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
FAQs
The 2019 Toyota Highlander features a variety of warning indicators, typically ranging from 15 to 20 depending on the specific model and options.
Common warning indicators include those for the engine, brakes, airbags, traction control, tire pressure monitoring system (TPMS), and more.
The check engine light typically signifies an issue with the engine or emissions system. It could range from minor issues like a loose gas cap to more serious problems like engine misfires.
The ABS (Antilock Braking System) warning light indicates a problem with the ABS, which helps prevent wheel lock-up during braking.
The tire pressure warning light alerts the driver when one or more tires are significantly underinflated, which could affect handling and fuel efficiency.
The battery warning light indicates a problem with the vehicle’s charging system. It’s important to address this promptly to avoid potential breakdowns.
The oil pressure warning light alerts the driver to low oil pressure, which could indicate low oil levels or a problem with the oil pump. Driving with low oil pressure can cause serious engine damage.
The airbag warning light indicates a fault in the airbag system.
If the brake warning light illuminates, it could indicate low brake fluid levels or a problem with the braking system. It’s essential to have this checked immediately for safety reasons.
The power steering warning light alerts the driver to a problem with the power steering system, which could make steering more difficult. It’s important to address this promptly to maintain control of the vehicle.
The TPMS warning light indicates that one or more tires have low air pressure or a malfunction in the tire pressure monitoring system. It’s crucial to check tire pressures and inflate them to the recommended levels.
The maintenance required light serves as a reminder for routine maintenance tasks, such as oil changes or tire rotations.
The seat belt warning light reminds occupants to fasten their seat belts for safety. It’s important to ensure that all passengers are properly restrained before driving.
The high beam indicator illuminates when the high beam headlights are engaged, providing enhanced visibility at night. It reminds the driver to switch to low beams when approaching other vehicles.
The cruise control indicator illuminates when the cruise control system is active and maintains a set speed. It reminds the driver that cruise control is engaged.
Useful Links
View Full PDF: Toyota Highlander 2019 User Manual | Auto User Guide
2023 – 2024 Toyota Highlander Review, Price, Features, Mileage (Brochure)
2019 Toyota Highlander Multi-Mode Display | Screen Setting Guide