2023 FORD Explorer Engine Oil and Fluids
Introduction
Welcome to the thrilling world of the 2023 Ford Explorer, where state-of-the-art performance and engineering meet unmatched adventure. In this quick guide, we’ll examine the engine oil and fluids, which are the heart of the Explorer, demonstrating the precise attention to detail and innovation that have come to be associated with the Ford brand.
The 2023 Ford Explorer is more than simply an SUV; it’s an example of the best in the industry. A modern engineering marvel is waiting for you under the hood: a selection of strong and effective powertrains created to provide you the power, dependability, and efficiency you expect from your car. But what maintains the seamless operation and efficiency of these powerhouses? The carefully chosen engine oils and fluids that guarantee every drive is as flawless as it is thrilling hold the key to the solution.
ENGINE OIL DIPSTICK – 2.3L ECOBOOST™
- A Minimum.
- B Nominal.
- C Maximum.
ENGINE OIL DIPSTICK – 3.3L
- A Minimum.
- B Nominal.
- C Maximum.
ENGINE OIL DIPSTICK – 3.0L
- A Minimum.
- B Nominal.
- C Maximum.
ENGINE OIL CHECK
- Make sure that your vehicle is on level ground.
- Check the oil level before starting the engine, or switch the engine off after warm up and wait 15 minutes for the oil to drain into the oil pan.
Note: Checking the oil level too soon could result in an inaccurate reading. - Remove the dipstick and wipe it with a clean, lint-free cloth.
- Reinstall the dipstick and make sure it is fully seated.
- Remove the dipstick again to check the oil level.
Note: If the oil level is between the maximum and minimum marks, the oil level is acceptable. Do not add oil. - If the oil level is at the minimum mark, immediately add oil.
- Reinstall the dipstick. Make sure it is fully seated.
Note: The oil consumption of new engines reaches its normal level after approximately 3,000 mi (5,000 km).
Note: Increases in oil level can occur from frequent short trips that do not allow the engine to get to operating temperature, as well as frequent idling or low speed driving for long periods of time.
Note: If oil levels are continuously noted above the maximum mark, schedule a visit to your authorized dealer.
Adding Engine Oil
WARNING: Do not add engine oil when the engine is hot. Failure to follow this instruction could result in personal injury.
WARNING: Do not remove the filler cap when the engine is running.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that the vehicle warranty may not cover.
- Clean the area surrounding the engine oil filler cap before you remove it.
- Remove the engine oil filler cap.
- Add engine oil that meets our specifications. See Capacities and Specifications.
- Reinstall the engine oil filler cap. Turn it clockwise until you feel a strong resistance.
Note: Make sure you install the oil filler cap correctly.
Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage.
Note: Immediately soak up any oil spillage with an absorbent cloth.
FAQs
The standard engine oil for the 2023 Ford Explorer is synthetic SAE 0W-20.
According to Ford, you should change the oil every 12 months, 7,500 to 10,000 miles, whichever comes first.
Although synthetic oil is suggested for the best performance and fuel efficiency, you can use regular oil if necessary. However, synthetic oil offers superior performance and protection.
Depending on the engine selection, the oil capacity varies. The 2.3L Eco Boost engine, for example, has a capacity of about 5.7 quarts, while the 3.0L Eco Boost engine has a capacity of about 6.0 quarts.
Place your car in park on a flat area, let the engine cool, remove the oil dipstick, clean it, reinstall it, and check the oil level. The level should be situated on the dipstick between the “MIN” and “MAX” markers.
Stick with the oil viscosity that is advised in the owner’s handbook. Viscosity changes may have an impact on the longevity and performance of engines.
Yes, the car has an Oil Life Monitoring System that monitors driving conditions and alerts the driver when it’s time for an oil change.
The Motor craft Orange Antifreeze/Coolant used in the 2023 Ford Explorer complies with Ford specification WSS-M97B51-A1.
According to Ford, coolant/antifreeze should be changed every 150,000 miles or 5 years, whichever comes first.
The transmission model determines the type of fluid to use. The owner’s manual is the best source for the recommended fluid type.
Use the transmission fluid indicated in the owner’s manual to ensure optimal operation and prevent any problems.
Ford normally advises monitoring the gearbox fluid level at each oil change and adhering to the owner’s manual’s instructions.
The power steering system in the 2023 Explorer commonly uses Motorcraft MERCON V automatic transmission fluid.
Ford doesn’t list a precise time frame for changing the power steering fluid. Nevertheless, it’s a good idea to routinely inspect it and replace it if it seems soiled or infected.
While using original Ford fluids and filters is advised for best performance, you can also utilize superior aftermarket substitutes that comply with Ford’s requirements. Just make sure they adhere to the specifications listed in the owner’s manual.
2023 Ford Explorer Specs, Price, Features, Mileage (Brochure)
Useful Links
View Full PDF: 2023 FORD Explorer |Auto User Guide
Download Manual: Ford Vehicle Owner Manuals | Ford
Related Article
2023 Ford Bronco Specs, Price, Features, Mileage (Brochure)
2023 Ford Puma Specs, Price, Features, and Mileage (Brochure)
2023 FORD ECOSPORT Specs, Price, Features and Mileage (Brochure)