2021 Vauxhall Mokka B Owner’s Manual

The new 2021 Vauxhall Mokka B is a better and more modern version of the popular car. The Mokka B tried to capture what it’s like to drive in a modern city with its sleek design, high-tech features, and efficient powertrain choices. The 2021 Vauxhall Mokka B was designed to be a compelling and competitive option in the small crossover market. It had a new look on the outside, a tech-forward interior with cutting-edge infotainment systems, and a variety of engines to suit different tastes.

Interior lighting

Instrument panel illumination control

Brightness of the following lights can be adjusted when the exterior lights are on:

• instrument panel illumination
• Info Display
• illuminated switches and operation elements

Turn thumb wheel F and hold until the desired brightness is obtained.

Parking lights
When the vehicle is parked, the parking lights on one side can be activated:

1. Switch off ignition.
2. Move the lever all the way up (right parking lights) or down (left parking lights).

Confirmed by a signal and the corresponding turn lights control indicator.

Reversing lights
The reversing light comes on when reverse gear is selected.

Misted light covers
The inside of the light housing may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing. The mist disappears quickly by itself. To help, switch on the headlights.

Lighting features

Entry lighting

Welcome lighting
Some or all of the following lights are switched on for a short time by unlocking the vehicle with the radio remote control:

• headlights
• interior lights

The number of activated lights depends on the surrounding light conditions. The lighting switches off immediately when the ignition is switched on. Starting off 3 102. This function can be activated or deactivated in the vehicle personalization. Vehicle personalization 3 79.

The following lights will additionally switch on when the driver’s door is opened:

• illumination of some switches
• Driver Information Centre
• door pocket lights

Exit lighting
The following lights are switched on when the ignition is switched off:

• ● headlights
  ● interior lights
  ● centre console lighting

They will switch off automatically after a delay. This function works only in the dark.

Vehicle locator lighting
This function allows to locate the vehicle, e.g., in weak lighting conditions using the remote control. The headlights come on and the turn lights flash for 10 seconds. Press on the remote control.

Peripheral lighting

• Peripheral lighting allows you to switch on the position lights, low beam and number plate lighting using the remote control.
• Press on the remote control to switch on peripheral lighting.
• Press a second time to switch off peripheral lighting.

Battery discharge protection
To prevent discharge of the vehicle battery when the ignition is switched off, some interior lights are switched off automatically after some time.

Cooling A/C
Press A/C to switch on cooling. The LED in the button illuminates to indicate activation. Cooling is only functional when the engine is running and fan is switched on. Press A/C again to switch off cooling. The air conditioning system cools and dehumidifies (dries) as soon as the outside temperature is slightly above the freezing point. Therefore, condensation may form and drip from under the vehicle. If no cooling or drying is required, switch off the cooling system for fuel saving reasons. Activated cooling may inhibit Autostops. Stop-start system 3 105.

Warning
The exchange of fresh air is reduced in air recirculation mode. In operation without cooling the air humidity increases, so the windows may mist up from inside. The quality of the passenger compartment air deteriorates, which may cause the vehicle occupants to feel drowsy.

In warm and very humid ambient air conditions, the windscreen may mist up from outside when cold air is directed towards it. If windscreen mists up from outside, activate windscreen wiper and deactivate w.

Temperature preselection :

Set the preselected temperature to the desired value using the left or the right rotary knob. Recommended temperature is 22 °C. The temperature is indicated in the display and in the climate settings menu. If the minimum temperature Lo is set, the climate control system runs at maximum cooling, if cooling A/C is switched on. If the maximum temperature Hi is set, the climate control system runs at maximum heating.

Notice
If A/C is switched on, reducing the set cabin temperature can cause the engine to restart from an Autostop or inhibit an Autostop.

Air conditioning A/C
Press A/C to switch on cooling. The LED in the button illuminates to indicate activation. Cooling is only functional when the engine is running and climate control fan is switched on. Press A/C again to switch off cooling. The air conditioning system cools and dehumidifies (dries) when outside temperature is above a specific level. Therefore, condensation may form and drip from under the vehicle. If no cooling or drying is required, switch off the cooling system for fuel saving reasons.

Auxiliary heater

Air heater
Quickheat is an electric auxiliary air heater which automatically warms up the passenger compartment more quickly.

Temperature preconditioning
The temperature preconditioning allows to heat or to ventilate the vehicle’s interior with ambient air. The temperature preconditioning can be programmed via the Info Display or the MyVauxhall App.

Notice
On vehicles without integrated navigation system, temperature preconditioning can only be used via the MyVauxhall App.

Notice
The temperature preconditioning is only activated if the ignition is off and the vehicle is locked.

If the charging level of the high voltage battery is below 50%, the temperature preconditioning is not activated. If a recurrent heating / ventilation is programmed and two heating /ventilation procedures are carried out without operating the vehicle, the programmation is deactivated.

Setting timer

Notice
Several timers can be programmed and saved. It is recommended to programme temperature preconditioning with the vehicle plugged in, in order to optimise the long-term perfomance of the high voltage battery.

Maintenance

Air intake
The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow.

Air conditioning regular operation
In order to ensure continuously efficient performance, cooling must be operated for a few minutes once a month, irrespective of the weather and time of year. Operation with cooling is not possible when the outside temperature is too low.

Service
For optimal cooling performance, it is recommended to annually check the climate control system, starting three years after initial vehicle registration, including:.

• functionality and pressure test
• heating functionality
• leakage check
• check of drive belts
• cleaning of condenser and evaporator drainage
• performance check

Automatic mode AUTO
Basic setting for maximum comfort:

• Press AUTO, the air distribution and fan speed are regulated automatically.
• Open all air vents to allow optimised air distribution in automatic mode.
• Air conditioning must be activated for optimal cooling and demisting. Press A/C to switch on air conditioning. The LED in the button indicates activation.
• Set the preselected temperature using the left or right rotary knob. Recommended temperature is 22 °C.

Manual settings
Climate control system settings can be changed by activating the following functions:

Fan speed E
Adjust the air flow by turning rotary knob to the desired speed. Fan speed can also be changed in the climate settings menu. Press MENU to enter the menu. Turn rotary knob anticlockwise as far as it will go: fan and cooling are switched off. To return to automatic mode, press AUTO.

Temperature preselection :
Set the preselected temperature to the desired value using the left or the right rotary knob.
Recommended temperature is 22 °C. The temperature is indicated in the display and in the climate settings menu.
If the minimum temperature Lo is set, the climate control system runs at maximum cooling, if cooling A/C is switched on.
If the maximum temperature Hi is set, the climate control system runs at maximum heating.

Notice
If A/C is switched on, reducing the set cabin temperature can cause the engine to restart from an Autostop or inhibit an Autostop.

Air conditioning A/C
Press A/C to switch on cooling. The LED in the button illuminates to indicate activation. Cooling is only functional when the engine is running and climate control fan is switched on. Press A/C again to switch off cooling. The air conditioning system cools and dehumidifies (dries) when outside temperature is above a specific level. Therefore, condensation may form and drip from under the vehicle. If no cooling or drying is required, switch off the cooling system for fuel saving reasons.

Air heater
Quickheat is an electric auxiliary air heater which automatically warms up the passenger compartment more quickly.

Temperature preconditioning
The temperature preconditioning allows to heat or to ventilate the vehicle’s interior with ambient air. The temperature preconditioning can be programmed via the Info Display or the MyVauxhall App.

Notice
On vehicles without integrated navigation system, temperature preconditioning can only be used via the MyVauxhall App.

Notice
The temperature preconditioning is only activated if the ignition is off and the vehicle is locked.

If the charging level of the high voltage battery is below 50%, the temperature preconditioning is not activated. If a recurrent heating / ventilation is programmed and two heating /ventilation procedures are carried out without operating the vehicle, the programmation is deactivated.

FAQ