2022 Vauxhall Grandland Fuses and Fuse Box | Checking and replacing fuses
The fuse system of the 2022 Vauxhall Grandland is an essential component that guarantees the proper functioning of the electrical system. Comprehending the functionality of your vehicle’s fuse box and the procedure for inspecting and substituting fuses is essential for ensuring the seamless functioning of your vehicle. This guide will provide a comprehensive exploration of fuses, including their precise location, function, and a detailed procedure for effectively inspecting and replacing them as necessary. By gaining expertise in the fuse system of your Grandland, you will be able to effectively handle any issues with malfunctioning components or perform regular inspections, enabling you to maintain your vehicle in excellent condition.
Electrical system
Fuses
A defective fuse must be replaced by a workshop.
Vehicle tools
Tools
Vehicles with spare wheel
Open the floor cover of the load compartment
Remove the cover of the tool box.
The jack, the towing eye, chocks and the tools are located in the tool box.
The towing eye and the chocks are located in a box below the floor cover in the load compartment.
Vehicles with audio speaker system
The towing eye and the chocks are located in a box below the floor cover in the load compartment.
Wheels and tyres
Tyre condition, wheel condition
Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking.
Regularly check the wheels for damage. Seek the assistance of a workshop in the event of damage or unusual wear.
Winter tyres
Winter tyres improve driving safety at temperatures below 7 °C and should therefore be fitted on all wheels.
In accordance with country-specific regulations, affix the speed sticker in the driver’s field of view, if the tyre speed code is below the maximum speed of the vehicle.
All tyre sizes are permitted as winter tyres
Tyre designations
E.g. 225/55 R 18 98 V
225 : tyre width, mm
55 : cross-section ratio (tyre height to tyre width), %
R : belt type: Radial
RF : type: RunFlat
18 : wheel diameter, inches
98 : load index e.g. 98 is equivalent to 750 kg
V : speed code letter Speed code letter:
Q : up to 100 mph
S : up to 112 mph
T : up to 118 mph
H : up to 130 mph
V : up to 150 mph
W : up to 168 mph
Choose a tyre appropriate for the maximum speed of your vehicle.
The maximum speed is achievable at kerb weight with driver (75 kg) plus 125 kg payload. Optional equipment could reduce the maximum speed of the vehicle.
Directional tyres
Directional tyres should be mounted so that they rotate in the correct direction. The proper rotation direction is indicated by a symbol (e.g. an arrow) on the sidewall.
Tyre pressure
Check the pressure of cold tyres at least every 14 days and before any long journey. Do not forget the spare wheel. This also applies to vehicles with tyre pressure monitoring system.
The tyre pressure information label on the left door frame indicates the original equipment tyres and the correspondent tyre pressures.
The tyre pressure data refers to cold tyres. It applies to summer and winter tyres.
Always inflate the spare tyre to the pressure specified for full load.
Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear.
Tyre pressures differ depending on various options. For the correct tyre pressure value, follow the procedure below:
- Identify the engine identifier code. Engine data.
- Identify the respective tyre.
The tyre pressure tables show all possible tyre combinations 3 248.
For the tyres approved for your vehicle, refer to the EEC Certificate of Conformity provided with your vehicle or other national registration documents.
Warning
If the pressure is too low, this can result in considerable tyre warm-up and internal damage, leading to tread separation and even to tyre blow-out at high speeds.
Warning
For specific tyres the recommended tyre pressure as shown in the tyre pressure table may exceed the maximum tyre pressure as indicated on the tyre. Never exceed the maximum tyre pressure as indicated on the tyre.
Temperature dependency
The tyre pressure depends on the temperature of the tyre. During driving, tyre temperature and pressure increase. Tyre pressure values provided on the tyre information label and tyre pressure chart are valid for cold tyres, which means at 20 °C.
The pressure increases by nearly 1.5 psi for a 10 °C temperature increase. This must be considered when warm tyres are checked.
Tyre deflation detection system
The tyre deflation detection system continually checks the rotation speed of all four wheels and warns on low tyre pressure condition once vehicle is driving. This is achieved by comparing tyre rolling circumference with reference values and further signals.
If a tyre loses pressure the control indicator w illuminates and a warning message is displayed in the Driver Information Centre.
In this case reduce speed, avoid sharp cornering and strong braking. Stop at next safe opportunity and check tyre pressure.
After adjusting tyre pressure initialise system to extinguish the control indicator and restart system.
If the failure continues to be displayed, contact a workshop. The system is inoperable when ABS or ESC has a malfunction or a temporary spare wheel is used. Once the road tyre has been refitted, check the tyre pressure with cold tyres and initialise the system.
Caution
Deflation detection system warns just about low tyre pressure condition and does not replace regular tyre maintenance by the driver.
System initialisation
After tyre pressure correction or wheel change, the system must be initialised to learn new circumference reference values:
- Always ensure that all four tyres have correct tyre pressure.
- Apply parking brake.
- Initialise the system via the Info Display
- Reset is confirmed by pop-up indication.
After initialisation system automatically calibrates to new tyre pressures during driving. After longer drive the system will adopt and monitor new pressures.
Always check tyre pressure with cold tyres.
System has to be reinitialised when:
- Tyre pressure has been changed
- Load condition has been changed
- Wheels have been swapped or exchanged
The system will not warn instantaneously on a tyre blow out or a rapid deflation. This is due to required calculation time.
FAQs
The fuse box in the Vauxhall Grandland is commonly situated in the engine compartment or beneath the dashboard on the left side for the driver.
Fuses in a vehicle serve the purpose of protecting electrical circuits from damage caused by excessive current flow. Fuses safeguard electrical circuits by interrupting the flow of current in the event of an excessive load or a short circuit, thereby preventing harm to the components.
One can conduct a visual examination of a fuse to determine if the metal strip inside remains undamaged. A blown fuse will exhibit a fractured or liquefied strip.
Typically, the necessary tools for checking continuity are a fuse puller or a pair of pliers, along with a fuse tester or a multimeter.
Indeed, it is imperative to substitute a fuse with the precise amp rating in order to avert harm to the electrical system.
Utilizing a fuse with an incorrect amp rating may result in electrical complications or potential harm to the vehicle’s constituent
Consult the owner’s manual or the fuse box cover for a schematic illustrating the fuse locations and their respective purposes.
Certain automobiles are equipped with additional fuses that are kept in either the fuse box or a distinct compartment.
It is advisable to utilize fuses that are specified by the manufacturer or ones that possess comparable quality and specifications.
If a specific fuse is not present in the fuse box, it is advisable to refer to the owner’s manual or seek assistance from a service professional for guidance.
Regular inspections during standard maintenance are recommended, particularly if you observe any electrical malfunctions.
Yes, it is possible to test fuses using a multimeter. Indeed, employing a multimeter configured to measure continuity or resistance can effectively ascertain the functionality of a fuse.
Typical indications consist of inoperative electrical elements such as lights, power windows, or the radio.
Prior to inspecting or replacing fuses, it is essential to ensure that the vehicle is turned off in order to prevent any potential electrical hazards.
If you lack confidence in managing fuses or if the issue persists even after replacing a fuse, it is advisable to seek the guidance of a skilled mechanic for assistance.
Useful Links
View Full PDF: Vauxhall Grandland 2022 User Manual|Auto User Guide
2022 Vauxhall Grandland Displays Instructions