2023 Vauxhall Corsa F User Manual

The Vauxhall Corsa F may not be easy to find. But I can give you a general idea based on the most popular trends and features of the Vauxhall Corsa line. The Vauxhall Corsa is one of the brand’s most famous and long-lasting models. It is known for being affordable, practical, and stylish. The engine choices for the Corsa have always included gasoline, diesel, and, more recently, electricity. These tendencies are likely to keep going with the 2023 Vauxhall Corsa F, though the fuel economy, electric range, and pollution standards might get better. You could also expect updated entertainment systems, better safety features, and new design features. Upgrades to the interior could include better materials, more ergonomic designs, and up-to-date ways to connect. This would make driving a more refined and easy experience. On the outside, styling changes that fit with Vauxhall’s current style could be predicted. This would make the car look more modern and attractive. As car companies move toward more environmentally friendly options, a fully electric or hybrid version of the Corsa F could be a key offering, making it more appealing to people who care about the environment. For exact details and official information about the 2023 Vauxhall Corsa F, it would be best to check Vauxhall’s official announcements, website, or approved dealers. Since my last update, details may have been released or changed.

Roof rack system

Roof rack

For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended. For further information, contact your workshop.

Open all doors. Mounting points are located in each door frame of the vehicle body. Fasten the roof rack according to the installation instructions delivered with the roof rack. Remove the roof rack when not in use.

Loading information

Warning
Always make sure that the load in the vehicle is securely stowed. Otherwise objects can be thrown around inside the vehicle and cause personal injury or damage to the load or car.

• Heavy objects in the load compartment should be placed against the seat backrests. Make sure that the backrests are securely engaged. If objects can be stacked, heavier objects should be placed at the bottom.
• Prevent sliding of loose objects by securing them with straps attached to the lashing eyes 3 49.
• Do not allow the load to protrude above the upper edge of the backrests.
• Do not place any objects on the load compartment cover or the instrument panel, and do not cover the sensor on top of the instrument panel.
• The load must not obstruct the operation of the pedals, parking brake and gear selector, or hinder the freedom of movement of the driver. Do not place any unsecured objects in the interior.
• Do not drive with an open load compartment.
• The payload is the difference between the permitted gross vehicle weight (see identification plate 3 298) and the EC kerb weight. To calculate the payload, enter the data for your vehicle in the weights table at the front of this manual.
• The EC kerb weight includes weights for the driver (68 kg), luggage (7 kg) and all fluids (fuel tank 90% full). Optional equipment and accessories increase the kerb weight.
• Driving with a roof load increases the sensitivity of the vehicle to cross-winds and has a detrimental effect on vehicle handling due to the vehicle’s higher centre of gravity. Distribute the load evenly and secure it properly with retaining straps. Adjust the tyre pressure and vehicle speed according to the load conditions. Check and retighten the straps frequently. Do not drive faster than 75 mph. The permissible roof load is 70 kg. Do not exceed a loading height of 40 cm. The roof load is the combined weight of the roof rack and the load.

Controls Steering wheel adjustment

Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and, depending on version, the steering wheel lock has been released.

Steering wheel controls
Some driver assistance systems, Infotainment system and a connected mobile phone can be operated via the controls on the steering wheel.

Further information is available in the Infotainment system section. Cruise control 3 198. Speed limiter 3 201. Adaptive cruise control 3 203.

Heated steering wheel
Activate heating by pressing Z. Activation is indicated by the LED in the button. The heating works only when the outside temperature is below 20 °C. Stop-start system 3 174.

Horn

Pedestrian safety alert
The sound of the pedestrian safety alert is generated to indicate the vehicle presence to pedestrians. It is active up to 19 mph.

Windscreen wiper and washer
Windscreen wiper with adjustable wiper frequency

• HI : fast
• LO : slow
• INT : interval wiping
• OFF : off
• 1x : single wipe

Do not use if the windscreen is frozen. Switch off in car washes. To activate interval wiping mode the next time ignition is switched on, press the lever downwards to position OFF and back to INT.

Adjustable wiper frequency
Wiper lever in position INT. Turn the adjuster wheel to adjust the desired wipe frequency.

Inductive charging

Warning
Inductive charging can affect the operation of implanted pacemakers or other medical devices. If applicable, seek medical advice before using the inductive charging device.

Warning
Remove any metal objects from the charging device before charging a mobile device, as these objects could become very hot.

To charge a mobile device:

1. Remove all objects from the charging device.
2. Place the mobile device with the display facing upwards on the charging area. Note that the mobile device must be placed between the positioning aids.

Qi compatible mobile devices can be charged inductively. On some mobile devices, a back cover with an integrated coil or a jacket may be required to use inductive charging. Protective cover for the mobile device could have impact on the inductive charging. In the event that the mobile device is not charging properly, rotate it 180°and place it on the charging device again.

Status LED

The LED indicates the current charging status.

Illuminates green
The mobile device is charging.

Flashes yellow
The mobile device has not been centred properly in the charging zone or an unknown object has been detected in the charging zone.

Illuminates yellow
There is a problem with the mobile device’s battery or a fault of the inductive charger has been detected. If the problem persists, seek the assistance of a workshop.

Warning lights, gauges and indicators

Speedometer

Midlevel instrument cluster

Indicates vehicle speed.

Odometer
The total recorded distance is displayed in miles.

Uplevel instrument cluster
The recorded distance since the last reset is displayed. Two trip odometer pages are selectable in the trip / fuel information menu for different trips. Trip odometer counts up to 9,999 miles. Press SET / CLR for 2 seconds to reset the trip odometer. Driver Information Centre 3 74.

Displays the engine speed. Drive in a low engine speed range for each gear as much as possible. A red marker indicates the beginning of the warning zone of excessive revolutions. For Diesel engines, the warning zone starts at 5000 revolutions per minute. For petrol engines, the warning zone starts at 6500 revolutions per minute.

Caution
If the indicator is in the red warning zone, the maximum permitted engine speed is exceeded. The engine can be damaged.

Engine oil level monitor
The state of the engine oil level is displayed in the Driver Information Centre for a few seconds following the service information after switching on the ignition. A proper state of engine oil level is indicated by a message. If engine oil level is low, T flashes and a message is indicated, accompanied by the C indicator. Confirm engine oil level by using the dipstick and top up engine oil respectively. Engine oil 3 260. A fault of measurement is indicated by a message. Check engine oil level manually by using the dipstick.

Service display
The service system informs when to change the engine oil and filter or a vehicle service is required. Based on driving conditions, the interval at which an engine oil and filter change are required can vary considerably. Service information 3 293. A required service due is displayed in the Driver Information Centre for several seconds after switching on the ignition. If no service is required for the next 1800 miles or more, no service information appears in the display. If service is required within the next 1800 miles, the remaining distance to the next service due, the distance travelled since the last service due or the time period that remains to the next service due is indicated for several seconds. Simultaneously symbol C illuminates temporary as reminder. If service is required in less than 600 miles, the remaining distance to the next service due, the distance travelled since the last service due or the time period that remains to the next service due is indicated for several seconds. Simultaneously C illuminates permanently as reminder. Overdued service is indicated by a message in the Driver Information Centre which indicates the overdued distance. C flashes and then illuminates permanently until service is executed.

Reset of service interval
After each service, the service indicator must be reset to ensure proper functionality. It is recommended to seek the assistance of a workshop. If service is executed by yourself, operate as following:

• switch off ignition
• press and hold SET / CLR
• switch on ignition, the distance indication begins a countdown
• when the display indicates =0, release SET / CLR

The symbol C disappears.

Retrieving service information
The status of the service information can be retrieved at any time via the Info Display. Press Check in the vehicle settings menu. The service information is displayed for a few seconds. Info Display 3 77. Service information 3 293.

Control indicators
The control indicators described are not present in all vehicles. The description applies to all instrument versions. Depending on the equipment, the position of the control indicators may vary. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test.

FAQ