Instrument Cluster Guide: 2022 Vauxhall New Vivaro Warning Indicators
The 2022 Vauxhall New Vivaro Instrument Cluster Guide tells you everything you need to know about the warning lights that are meant to keep drivers aware and safe on the road. This book gives drivers in-depth explanations of each warning sign, so they can quickly figure out what their car is trying to tell them and act accordingly. This complete guide includes important signs like engine temperature and oil pressure, as well as warnings for low fuel or possible system malfunctions. It gives drivers the confidence to use their Vauxhall New Vivaro safely and efficiently.
2023 Vauxhall Vivaro Life Electric Review, Price, Features, And Mileage (Brochure)
Warning lights, gauges, and indicators
Instrument cluster
Depending on the version, three instrument clusters are available:
- Base level
- Midlevel
- Uplevel
Base-level instrument cluster
Midlevel instrument cluster
Uplevel instrument cluster
Cluster electric vehicle
Overview
Speedometer
Indicates vehicle speed.
Odometer
The total recorded distance is displayed in miles.
Trip odometer
The recorded distance since the last reset is displayed in the Driver Information Centre.
Base-level instrument cluster
The trip odometer counts up to 9,999.9 miles without automatic reset.
Press F for 2 seconds to reset the trip odometer.
Uplevel instrument cluster
The trip odometer counts up to 1,999.9 miles and resets them automatically.
Press 000 for 2 seconds to reset the trip odometer. Driver Information Centre 3 115.
Tachometer
Displays the engine speed. Drive in a low engine speed range for each gear as much as possible.
Caution
If the needle is in the red warning zone, the maximum permitted engine speed is exceeded. Engine at risk.
Fuel gauge
Displays the fuel level in the tank. Never run the fuel tank dry. The arrow indicates the vehicle side where the fuel filler flap is located.
Because of the fuel remaining in the tank, the top-up quantity may be less than the specified tank capacity.
Base level cluster
A scale consisting of white segments shows the fuel level. If the control indicator r illuminates yellow, refuel the tank immediately.
Midlevel and uplevel instrument cluster
If the control indicator 2 illuminates yellow, refuel the tank immediately.
High voltage battery gauge
The high-voltage battery gauge displays the charging level of the high-voltage battery.
Power indicator gauge
The power indicator gauge informs about the current energy situation of the vehicle.
- Charge: High voltage battery is being charged with energy resulting from braking or deceleration of the vehicle
- Eco: An optimum in energy is accessible in all driving modes
- Power: The vehicle is driven in a dynamic driving style with a focus on performance
Comfort consumption gauge
The comfort consumption gauge informs about the current electric consumption caused by the following thermal consumers:
- heating
- air conditioning
- heated windscreen
- heated rear window
- heated seats
If the drive mode Eco mode is selected, the performance of the thermal consumers is reduced. The needle of the comfort consumption gauge is in the ECO zone.
Engine coolant temperature gauge
Displays the coolant temperature.
Caution
If the engine coolant temperature is too high, stop the vehicle, and switch off the engine. Danger to engine. Check the coolant level.
Base level cluster
A scale consisting of white segments shows the engine coolant temperature.
If the engine coolant temperature is too high, the control indicator V illuminates red. Switch off the engine immediately.
Midlevel and uplevel instrument cluster
- 70 °C: engine operating temperature not yet reached
- 90 °C: normal operating temperature
- red zone: temperature too high
Control indicator 2 illuminates if the coolant temperature is too high.
Switch off the engine immediately.
Engine oil level monitor
The state of the engine oil level is displayed in the Driver Information Centre for a few seconds following the service information after switching on the ignition.
A proper state of engine oil level is confirmed. If the engine oil level is low, T flashes, and a warning message is indicated in the Driver Information Centre. Depending on the version, D flashes in the Driver Information Centre. Confirm engine oil level by using the oil dipstick and top-up engine oil respectively.
Engine oil
A fault of measurement is indicated by E or a message in the Driver Information Centre together with T. Check engine oil level manually by using the dipstick.
Service display
The service system informs when to change the engine oil and filter or a vehicle service is required. Based on driving conditions, the interval at which an engine oil and filter change is required can vary considerably.
Service Information
A required service is displayed in the Driver Information Centre for several seconds after switching on the ignition. If no service is required for the next 1800 miles or more no service information appears in the display.
If service is required within the next 1800 miles, A illuminates temporarily as a reminder. Simultaneously, the remaining distance or time duration is indicated for several seconds. Depending on the version, the distance travelled since the due date is indicated in the Driver Information Centre.
If service is required in less than 600 miles, A flashes and then illuminates permanently. The remaining distance or time duration is indicated for several seconds. Simultaneously, the remaining distance or time duration is indicated for several seconds. Depending on the version,
the distance travelled since the due date is indicated in the Driver Information Centre.
Overdued service is indicated by a message in the Driver Information Centre which indicates the overdued distance. A flashes and then illuminates permanently until service is executed. Additionally, the control indicator C or SERVICE illuminates.
Reset of service interval
After each service, the service indicator must be reset to ensure proper functionality. It is recommended to seek the assistance of a workshop.
If the service is executed by yourself, operate as follows:
- switch off ignition
- Press and hold F, G or CHECK
- switch on the ignition, and the distance indication begins a countdown
- when the display indicates =0, release the button and disappears
Retrieving service information
To retrieve the status of the service information at any time press F, G or CHECK. The service information is displayed for a few seconds. Instrument cluster 3 100. Service information 3 259.
Control indicators
The control indicators described are not present in all vehicles. The description applies to all instrument versions. Depending on the equipment, the position of the control indicators may vary. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test.
The control indicator colours mean:
red: danger, important reminder
yellow: warning, information, fault
green: confirmation of activation
blue: confirmation of activation
white\grey: confirmation of activation
See all control indicators on different instrument clusters 3 100.
Turn lights
flash green.
Flash
Turn lights or the hazard warning flashers are activated. Rapid flashing: failure of a turn light or associated fuse, failure of turn light on a trailer. Bulb replacement 3 219. Turn lights 3 133.
Seat belt reminder
illuminates or flashes in the instrument cluster and the overhead console.
After the ignition has been switched on, a illuminates until the seat belt has been fastened.
When driving faster than 12 mph and a seat belt is unfastened, a flash in the overhead console for the respective seat and a chime is audible.
Additionally, illuminates the instrument cluster.
After two minutes, the chime goes off and illuminates constantly in the overhead console until the seat belt of the respective seat is fastened.
Airbag and belt tensioners illuminate yellow.
When the ignition is switched on, the control indicator illuminates for several seconds. If it does not illuminate, does not extinguish after several seconds or illuminates whilst driving, there is a fault in the airbag system. Seek the assistance of a workshop. The airbags and belt pretensioners may fail to trigger in the event of an accident.
Deployment of the belt pretensioners or airbags is indicated by continuous illumination of d.
2023 Vauxhall Vivaro Life Electric Review, Price, Features, And Mileage (Brochure)
Warning
Have the cause of the fault remedied immediately by a workshop.
- Belt pretensioners
- Airbag system
Airbag deactivation
ON illuminates yellow. The front passenger airbag is activated. gOFF illuminates yellow. The front passenger airbag is deactivated. Airbag deactivation 3 64.
Charging system
illuminates red. Illuminates when the ignition is switched on and extinguishes shortly after the engine starts.
illuminates when the engine is running
Stop, and switch off the engine. The vehicle battery is not charging. Engine cooling may be interrupted. The brake servo unit may cease to be effective. Seek the assistance of a workshop.
The malfunction indicator light
illuminates or flashes yellow. Illuminates when the ignition is switched on and extinguishes shortly after the engine starts.
Illuminates when the engine is running
Fault in the emission control system. The permitted emission limits may be exceeded. Seek the assistance of a workshop immediately.
Flashes when the engine is running
Fault that could lead to catalytic converter damage. Ease up on the accelerator until the flashing stops. Seek the assistance of a workshop immediately.
Service vehicle soon
C or SERVICE illuminates yellow. Illuminates briefly when the ignition is switched on. May illuminate together with other control indicators and a corresponding message in the Driver Information Centre. Seek the assistance of a workshop immediately.
Stop engine
STOP illuminates red. Illuminates briefly when the ignition is switched on. Illuminates together with other control indicators, accompanied by a warning chime and a corresponding message in the Driver Information Centre. Stop the engine immediately and seek the assistance of a workshop.
System check
W illuminates yellow. Illuminates together with STOP. A major engine fault has been detected. Stop the engine as soon as possible and seek the assistance of a workshop.
The brake system
h illuminates red. The brake fluid level is too low.
Warning
Stop. Do not continue your journey. Consult a workshop.
Parking brake
h illuminates red. Illuminates when the manual parking brake is applied and ignition is switched on 3 169.
Antilock brake system (ABS)
illuminates yellow. Illuminates for a few seconds after the ignition is switched on. The system is ready for operation when the control indicator is extinguished.
If it does not extinguish after a few seconds, or if it illuminates while driving, there is a fault in the ABS. The brake system remains operational but without ABS regulation.
If i illuminates together with h, a fault with the electronic brake force distribution has been detected. Stop the engine immediately and seek the assistance of a workshop. Antilock brake system 3 168.
Gear shifting
with the number of higher gear is indicated when upshifting is recommended for fuel-saving reasons. On some vehicles with a manual transmission, the system suggests shifting into a neutral position, when the activation of the stop-start system is recommended.
Lane departure warning
Q flashes green. The system recognises an unintended lane change. Lane departure warning 3 200.
The Electronic Stability Control and Traction Control system
illuminates or flashes yellow.
Illuminates
A fault in the system is present. Continued driving is possible. Driving stability, however, may deteriorate depending on road surface conditions. Have the cause of the fault remedied by a workshop.
Flashes
The system is actively engaged. Engine output may be reduced and the vehicle may be braked automatically to a small degree. Electronic Stability Control and Traction Control System 3 170. Selective ride control.
Engine coolant temperature
V or 2 illuminates red. Illuminates when the engine is running Stop, and switch off the engine.
Caution
The coolant temperature is too high.
Check the coolant level immediately. If there is sufficient coolant, consult a workshop.
Preheating
z illuminates yellow. Preheating of the diesel engine is activated. Only activates when the outside temperature is low. Start the engine when the control indicator extinguishes.
Exhaust filter
+ or C illuminates yellow, accompanied by a message in the Driver Information Centre and a chime. The exhaust filter requires cleaning. Continue driving until the control indicator extinguishes.
Illuminates temporarily
Start of saturation of the exhaust filter. Start the cleaning process as soon as possible by driving at a vehicle speed of at least 40 mph.
Illuminates constantly
Indication of a low additive level. Seek the assistance of a workshop.
Exhaust filter 3 160.
AdBlue
B flashes or illuminates yellow.
Illuminates yellow
The remaining driving range is between 60 miles and 1500 miles.
Flashes yellow
The remaining driving range is between 0 miles and 60 miles. The adBlue level is low. Refill AdBlue soon to avoid prevention of the engine start. AdBlue 3 161.
Deflation detection system
q illuminates or flashes yellow.
Illuminates
Tyre pressure loss in one or more wheels. Stop immediately and check the tyre pressure.
Flashes
Fault in the system. Consult a workshop. Deflation detection system 3 238.
Engine oil pressure
T illuminates red. Illuminates when the ignition is switched on and extinguishes shortly after the engine starts. Illuminates when the engine is running
Caution
Engine lubrication may be interrupted. This may result in damage to the engine and/or the locking of the drive wheels.
- Select neutral gear.
- Move out of the flow of traffic as quickly as possible without impeding other vehicles.
- Switch off the ignition.
Warning
When the engine is off, considerably more force is needed to brake and steer. During an Autostop the brake servo unit will still be operational.
Do not remove the key until the vehicle is stationary, otherwise, the steering wheel lock could engage unexpectedly.
Keep the engine turned off and let the vehicle be towed to a workshop.
Low fuel
r or 2 illuminates yellow. The level in a fuel tank is too low. Refuelling 3 204. Bleeding the diesel fuel system 3 218.
Autostop
ñ illuminates or flashes green. The Illuminates green Engine is in an Autostop. Flashes green Autostop is temporarily unavailable, or Autostop mode is invoked automatically. Stop-start system 3 156.
Exterior light
F illuminates green. The exterior lights are on 3 129.
Low beam
D illuminates green. Illuminated when low beam is on.
High beam
A illuminates blue. Illuminates, when high beam is on or during headlight, flash 3 130.
High beam assist
B illuminates green. The high beam assist is activated 3 130.
LED headlights
C illuminates and a warning message is displayed in the Driver Information Centre. Seek the assistance of a workshop.
Front fog lights
G illuminates green. The front fog lights are on 3 133.
Rear fog light
H illuminates yellow. The rear fog light is on 3 133.
Rain sensor
y illuminates green. Illuminated when rain sensor position on wiper lever is selected.
Cruise control
v illuminates in the Driver Information Centre when the speed limiter is active. The set speed is indicated in the Driver Information Centre. Cruise control 3 173.
Adaptive cruise control
Q illuminates in the Driver Information Centre when adaptive cruise control is active. Adaptive cruise control 3 179.
Vehicle detected ahead
Depending on the version, V or I is displayed in the Driver Information Centre.
Adaptive cruise control
V is displayed in the Driver Information Centre when a vehicle ahead is detected in the same lane. Adaptive cruise control 3 179.
Forward collision alert
I am displayed in the Driver Information Centre when the distance to the vehicle ahead gets too small. Forward collision alert 3 186.
Side blind spot alert
T illuminates green. The system is active at 3 194.
Active emergency braking
m illuminates or flashes yellow. Illuminates The system has been deactivated or a fault has been detected. Additionally, a warning message is displayed in the Driver Information Centre. Check the reason for the deactivation of 3 188 and in case of a system fault, seek the assistance of a workshop.
Flashes
The system is actively engaged. Depending on the situation, the vehicle may automatically brake moderately or hard. Forward collision alert 3 186. Front pedestrian protection 3 190. Active emergency braking 3 188.
Speed limiter
5 illuminates in the Driver Information Centre when the speed limiter is active. The set speed is indicated alongside 5 symbols. Speed limiter 3 176.
Door open
O illuminates red. A door, the tailgate or the tailgate window is open. If the vehicle is equipped with hinged doors, O is not illuminated when it is open.
FAQs
The ABS warning light indicates a malfunction in the Anti-lock Braking System, which could compromise braking performance.
The oil pressure warning light illuminates when the engine oil pressure drops below a safe level, signalling potential engine damage.
The battery warning light indicates a malfunction in the charging system or a low battery level, which could lead to vehicle stalling or electrical failure.
The airbag warning light illuminates when there’s a fault in the airbag system, indicating potential safety risks in case of an accident.
The engine temperature warning light indicates that the engine is overheating, which requires immediate attention to prevent engine damage.
The TPMS warning light illuminates when one or more tyres have low pressure, potentially affecting vehicle handling and safety.
The glow plug indicator light signifies that the engine’s glow plugs are warming up in diesel engines, aiding in cold starting.
The fuel filter warning light illuminates when there’s a restriction in the fuel system, indicating the need for maintenance to prevent engine damage.
The traction control warning light indicates a malfunction in the traction control system, which may compromise vehicle stability during acceleration or cornering.
The LDWS warning light illuminates when the vehicle deviates from its lane without signalling, alerting the driver to potential unintentional lane departures.
The power steering warning light signifies a malfunction in the power steering system, making steering effortful and potentially compromising vehicle control.
The DPF warning light illuminates when the diesel particulate filter is becoming clogged, indicating the need for regeneration to maintain engine efficiency.
The BSM warning light indicates the presence of a vehicle in the blind spot, alerting the driver to avoid potential collisions during lane changes.
The MIL illuminates when the engine control system detects a fault that may affect vehicle emissions or performance, requiring diagnostic attention.
The AEB warning light signifies a malfunction in the automatic emergency braking system, which may compromise the vehicle’s ability to detect and mitigate collisions.
Useful Links
View Full PDF: Vauxhall New Vivaro 2022 User Manual | Auto User Guide
2023 Vauxhall Vivaro Life Electric Review, Price, Features, And Mileage (Brochure)
Display Screen: 2022 Vauxhall New Vivaro Warning Messages Guide