2022-2023 Volkswagen Tiguan Instrument Cluster Guidelines

The 2022–2023 Volkswagen Tiguan Instrument Cluster Guide shows drivers how to use a sophisticated and easy-to-understand dashboard interface that combines current looks with useful features. This innovative set of instruments is made to give drivers quick access to important information, making driving safer and easier. The cluster’s high-resolution screen shows a lot of data, such as speed, fuel economy, navigation instructions, and the status of the car. The easy-to-use controls and settings that can be changed let drivers make their driving surroundings more comfortable and convenient. Volkswagen’s commitment to giving drivers a cutting-edge experience in the Tiguan is shown by its use of advanced technology and a user-centred design that sets new standards for how information and control are integrated within the vehicle.

2023 Volkswagen Tiguan Specs, Price, Features, Mileage and Torque

Instrument cluster

The vehicle is equipped either with an analog or a digital instrument cluster (Active Info Display).
When you start the engine after the 12-volt battery has been discharged or changed, you may find that system settings (time, date, personal convenience settings, and programming) have been changed or deleted. Check and correct the settings as necessary once the 12-volt vehicle battery has been sufficiently charged.

WARNING
Accidents and injuries can occur if the driver is distracted.

• Never press the buttons on the instrument cluster while the vehicle is in motion.
• Any settings for the instrument cluster display and displays in the Infotainment system should be made only when the vehicle is stationary to reduce the risk of accidents and serious injuries.

Analog instrument clusterDash panel: analog instrument cluster.
First, read and observe the introductory information and safety warnings⇒ Introduction
Descriptions of the instruments

1. Rev counter (running engine speed in revolutions x 1,000 per minute). The start of the red zone on the dial indicates the maximum engine speed that may be used in each gear when the engine is warm and after it has been run properly. You should change up a gear or move the selector lever to D/S (or lift your foot off the accelerator) before the needle reaches the red zone
2. Coolant temperature display⇒ Coolant temperature display.
3. Displays⇒ Displays.
4. Reset, set, and display button⇒ Displays.
5. Speedometer
6. Fuel gauge⇒ Fuel gauge.

NOTICE

• When the engine is cold, avoid high engine speeds, driving at full throttle, and overloading the engine.
• The needle on the rev counter should only briefly point into the red area, as engine damage may otherwise be incurred.

Changing up a gear early will help to save fuel and reduce engine noise.

Digital instrument cluster (Active Info Display)
First, read and observe the introductory information and safety warnings⇒ Introduction

The “Active Info Display” is a digital instrument cluster with a high-resolution TFT color display. To complement the standard dials such as the rev counter and speedometer, users can choose from various “information profiles” to view additional data.

Descriptions of the instruments

1. Rev counter (running engine speed in revolutions x 1,000 per minute). The start of the red zone on the dial indicates the maximum engine speed that may be used in each gear when the engine is warm and after it has been run properly. You should change up a gear or move the selector lever to D/S (or lift your foot off the accelerator) before the needle reaches the red zone
2. Data is selected via an information profile. Precisely what data is shown depends on which information profile has been selected. The example above shows the Classic profile with no additional information shown.
3. Displays⇒ Displays.
4. Reset, set, and display button⇒ Displays.
5. Speedometer
6. Digital speed display.
7. Fuel gauge⇒ Fuel gauge.
8. Coolant temperature display
9. Current gear/selector lever position⇒ Manual gearbox: selecting a gear or ⇒ DSG dual-clutch gearbox.

2023 Volkswagen Tiguan Specs, Price, Features, Mileage and Torque

Information profiles
To select a specific information profile, go to the Views menu option in the display of the instrument cluster ⇒ Instrument cluster menus. The Active Info Display shows additional information in the center of the dials ⇒ Fig. 15 ② depending on the information profile you have selected. The following information profiles are available:

• Classic. No additional information is shown.
• Consumption and range. Current consumption is shown graphically and average consumption is shown digitally in the rev counter. The remaining range is shown digitally in the speedometer.
• Efficiency. Average consumption is shown digitally and current consumption is shown driving style is fuel-efficient, and a graphic display helps the driver save fuel.
• Navigation. If route guidance is active: the remaining distance to the set destination and an estimated time of arrival are shown in the rev counter, and arrows to aid navigation are shown in the speedometer. If route guidance is inactive: the current altitude is shown in the rev counter, and a compass is shown in the speedometer.
• Driver assistance. Graphic representation of various driver assist systems or digital display of the driving time in the rev counter. The speedometer meanwhile shows arrow navigation or a compass.
• Off-road. Digital display of the steering angle and compass display in the speedometer. With active Hill Descent Control: graphic display of the Hill Descent Control with speed display in the speedometer.

Navigation map in the Active Info Display
With some vehicle equipment levels, the Active Info Display can display a detailed map. To display this map, select the Navigation menu item in the instrument cluster ⇒ Instrument cluster menus.
The map can be shown in either of two sizes. If the larger version is selected, the Active Info Display dials will be smaller. To select the preferred map size:

• Press the button on the multifunction steering wheel ⇒ Instrument cluster menus to
  switch between map sizes as required.
• OR: press the arrow button on the multifunction steering wheel to select the
  required map size. A frame appears around the selected option.
• Confirm the selection by pressing the button on the multifunction steering wheel.

Depending on the equipment level, navigation is shown on two displays or only one. The navigation map be displayed on the Active Info Display and Infotainment system or only on the Infotainment system display. In the latter case, only navigation arrows are shown on the Active Info Display.

NOTICE

• When the engine is cold, avoid high engine speeds, driving at full throttle, and overloading the engine.
• The needle on the rev counter should only briefly point into the red area, as engine damage may otherwise be incurred.

Changing up a gear early will help to save fuel and reduce engine noise.

 

FAQs

Useful Link:

View Full PDF: 2022-2023 Volkswagen Tiguan User Manual | Auto User Guide

2022 To 2023 Volkswagen Tiguan Warning and Indicator Lights Instructions

2023 Volkswagen Tiguan Specs, Price, Features, Mileage and Torque