2024 Volkswagen Polo Displays User Manual
The 2024 Volkswagen Polo is more than just a vehicle in the rapidly changing world of automotive innovation; it’s a flawless fusion of state-of-the-art technology and user-focused design. The screens are a technical marvel in the center of this dynamic car. These displays are much more than just digital panels; they work as the vehicle’s command center, providing drivers with an immersive and user-friendly interface to engage with its many functionalities. The 2024 Volkswagen Polo’s displays redefine the driving experience, from the clear and concise instrument cluster that provides crucial driving information at a glance to the colorful touchscreen infotainment system that connects drivers to an endless stream of entertainment, navigation, and connectivity options. As we examine these displays’ complexities, we explore a world where form and function coexist, where creativity and intuition blend, and where each interaction is designed to improve the experience and make every drive an easy and thrilling adventure.
2023 – 2024 Volkswagen Golf GTI Specs, Price, Features, Mileage and Review
Information displayed on the digital instrument cluster Basic
Possible displays
Depending on the vehicle equipment, various information can be displayed in the main display and secondary display areas of the digital instrument cluster Basic:
- Outside temperature display.
- Date and time.
- Digital speed.
- Road signs are detected by the Dynamic Road Sign Display system.
- Natural gas quality.
- Driver assist systems.
- Multifunction display, e.g. Driving time/Distance covered.
- Gear-change indicator (→ Gear-change indicator) .
- Natural gas system inspection.
- Speed warning for winter tyres.
- Open doors, bonnet and boot lid.
- Mileage displays.
- Compass display.
- Radiator fan run-on.
- Engine code (EC).
- Navigation information.
- Oil temperature.
- Personalisation: Welcome.
- Radio information.
- Range.
- Service interval display.
- Start/stop system status display.
- Telephone information.
- Selector lever position.
- Warning and information messages.
- Warning and indicator lamps.
- Destination information.
Additional settings can be adjusted in the submenu.
Outside temperature display
If the outside temperature falls below approximately +4°C (+39°F), the temperature display also shows a snowflake symbol
. This symbol remains lit until the outside temperature rises above +6°C( +43°F) . In the following situation, the temperature displayed may be higher than the actual outside temperature as a result of the heat radiated from the engine.
- When the vehicle is stationary.
- When travelling at very low speeds.
The measuring range is between -45°C (-49°F) and +76°C (+169°F).
WARNING
Roads may be icy at low outside temperatures, also above freezing. There is an increased risk of accidents on icy roads. This can result in serious or fatal injuries.
- Drive with particular care if the symbol is displayed on the instrument cluster display.
- Always adapt your speed and driving style to the current visibility, weather and road or traffic conditions.
- Never rely only on the outside temperature display.
Gear-change indicator
While the vehicle is in motion, the digital instrument cluster may show which gear should be selected to reduce fuel consumption (→ Gear-change indicator).
Open doors, bonnet and boot lid
The digital instrument cluster indicates if any doors, the bonnet or boot lid are open once the vehicle has been unlocked and while the vehicle is in motion. In some cases, an acoustic warning is also given.
Speed warning for winter tyres
A display in the digital instrument cluster indicates when you have exceeded the set maximum speed. Speed warning settings can be made in the vehicle settings in the Infotainment system (→ Winter tyres).
Compass display
If the Compass secondary display is activated, the current compass direction in which you are driving is shown as a blue arrow with a representation of the vehicle in combination with a compass.
Radiator fan run-on
This display appears after the vehicle ignition has been switched off if the radiator fan is in after-run mode.
An after-run time of the radiator fan may be caused by the following:
- Exhaust gas treatment, e.g. during particulate filter regeneration.
- Active brake cooling after driving down hills.
- Dissipation of engine heat after vehicle operation under high loads, e.g. trailer towing.
Engine code
- Open the Service menu (→ Service menu).
- Select the Engine code menu option.
Navigation information
When route guidance is active, the Navigation information secondary displays shows an arrow to indicate the direction of travel. An arrow after the entry in the configuration menu links to a submenu. The submenu contains the home address and a list of recent destinations. You can start route guidance using the 
button.
Telephone information
If the Telephone secondary display is activated and a mobile telephone is connected via Bluetooth, the Bluetooth symbol is shown in the digital instrument cluster
. In addition, the 
symbol shows the charge level of the mobile phone battery
- A list of recent calls is displayed in the submenu. The list can be used to call the contacts shown.
Selector lever position for automatic gearbox
The selected position and, depending on driving profile, the selected gear are displayed both on the selector lever and in the digital instrument cluster. The gear shift pattern is displayed in the instrument cluster upon actuation of the brake or selector lever.
Destination information
When route guidance is active, the Destination information secondary display shows the expected journey time and the distance to the destination.
- Some settings can be saved in the user accounts of the personalisation function and can therefore change automatically when the user account is changed.
- Some notifications in the digital instrument cluster may be overridden by sudden events, e.g. incoming telephone calls.
- Depending on the vehicle equipment level, some settings and displays may also appear in the Infotainment system.
Rev counter
The start of the red zone on the dial indicates the maximum engine speed that may be used in each gear when the engine is warm and after it has been run in properly. You should change up a gear, select selector lever position D/S or lift your foot off the accelerator before the needle reaches the red zone.
NOTICE
Heavy loads on the engine, particularly when the engine is cold, can cause engine damage.
- When the engine is cold, avoid high engine speeds, driving at full throttle and overloading the engine.
- The needle on the rev counter should only briefly point into the red area, as engine damage may otherwise be incurred.
Changing up a gear early will help to save fuel and reduce engine noise.
Digital fuel gauge
WARNING
When the fuel level is too low, the fuel supply to the engine could be irregular and lead to the engine stuttering or stalling, especially when driving up or down hills and inclines. This can cause breakdowns in traffic, accidents and serious or fatal injuries. The steering, all driver assist systems and brake support systems will not function if the engine stalls due to a lack of fuel or irregular fuel supply.
- Make sure that the fuel tank is always sufficiently full.
- Always refuel when the fuel tank is only 1/4 full.
NOTICE
Irregular fuel supply can cause misfiring and allow unburnt fuel to enter the exhaust system.
- Never run the fuel tank completely dry.
- The small arrow next to the petrol pump symbol in the fuel gauge shows you the side of the vehicle on which the tank flap is located.
Troubleshooting
The fuel tank is almost empty
The indicator lamp lights up yellow. The reserve volume( red marking) is being consumed.
- Fill the tank as soon as possible.
The fuel tank almost empty
The indicator lamp lights up yellow. The fuel tank for natural gas is almost empty.
- Refuel with natural gas as soon as possible.
Vehicle in natural gas mode
The indicator lamp lights up green. The vehicle is in natural gas mode. The green indicator lamp will go out when the natural gas tank is empty.
- Refuel with natural gas as soon as possible.
Things to note in vehicles with natural gas engine
If the vehicle is parked for an extended period directly after refuelling, the pointer for the natural gas fuel gauge may not indicate exactly the same fuel level as shown directly after refuelling when the engine is restarted. This does not mean that there is a leak in the system, but rather that for technical reasons the pressure has been decreased in the natural gas fuel tank following a cooling phase directly after refilling.
- For vehicles with a natural gas engine, the fuel level indicator on the petrol tank can only show the correct level after a delay, depending on the refill amount.
Digital coolant temperature display
- Cold area. The engine has not yet reached operating temperature. Avoid high engine revs and heavy engine loads until the engine is warm.
- Normal area.
- Warning area. The bar may also move into the warning range when the engine is working hard, especially at high ambient temperatures.
- Cold area. The engine has not yet reached operating temperature. Avoid high engine revs and heavy engine loads until the engine is warm.
- Normal area.
- Warning area. The bar may also move into the warning range when the engine is working hard, especially at high ambient temperatures.
If the 
indicator lamp flashes red, the coolant temperature is too high or the coolant level is too low (→ Coolant).
FAQs
The 2024 Volkswagen Polo typically offers various types of displays, including a digital instrument cluster and a touchscreen infotainment system, each serving different purposes and providing distinct functionalities.
The digital instrument cluster of the 2024 Volkswagen Polo typically displays essential driving information, such as vehicle speed, engine RPM, fuel level, outside temperature, and various vehicle settings and alerts.
Yes, the digital instrument cluster in the 2024 Volkswagen Polo typically provides access to various vehicle settings and controls, allowing drivers to adjust features such as lighting, driver systems, and audio settings directly from the cluster.
The touchscreen infotainment display in the 2024 Volkswagen Polo typically comes in varying sizes, ranging from [insert size] inches to [insert size] inches, depending on the trim level and configuration.
The touchscreen infotainment display in the 2024 Volkswagen Polo typically offers a wide range of functions, including navigation, audio and media controls, smartphone integration (such as Apple CarPlay and Android Auto), vehicle settings, and various apps and widgets.
Yes, the touchscreen infotainment display in the 2024 Volkswagen Polo is often compatible with smartphone integration platforms such as Apple CarPlay and Android Auto, allowing seamless connectivity and access to smartphone apps and features.
Yes, the touchscreen infotainment display in the 2024 Volkswagen Polo typically allows drivers to control climate settings, including temperature, fan speed, and airflow direction, providing convenient access to climate controls.
Yes, the touchscreen infotainment display in the 2024 Volkswagen Polo often supports voice commands, allowing drivers to control various functions and access information hands-free for enhanced convenience and safety.
The touchscreen infotainment display in the 2024 Volkswagen Polo typically offers high-resolution screens with crisp and clear graphics, ensuring optimal visibility and readability of displayed information.
Yes, the touchscreen infotainment display in the 2024 Volkswagen Polo often provides access to vehicle diagnostics and maintenance information, including service reminders, diagnostic trouble codes (DTCs), and service history, helping drivers stay informed about their vehicle’s health and maintenance needs.
The touchscreen infotainment display in the 2024 Volkswagen Polo typically allows drivers to switch between different display modes or screens by tapping on designated icons or using navigation buttons on the screen, providing easy access to various functions and information.
Yes, the touchscreen infotainment display in the 2024 Volkswagen Polo is often designed to be highly responsive to touch inputs, providing smooth and intuitive interaction for drivers and passengers.
Yes, the touchscreen infotainment display in the 2024 Volkswagen Polo typically supports Bluetooth connectivity, allowing drivers to pair multiple devices such as smartphones, tablets, or music players for audio streaming and hands-free calling.
The displays of the 2024 Volkswagen Polo often feature safety-enhancing technologies such as voice commands, hands-free calling, and integration with driver systems, helping drivers stay focused on the road while accessing essential information and functions.
Useful Links
2023 – 2024 Volkswagen Golf GTI Specs, Price, Features, Mileage and Review