2024 Volkswagen Polo Fuses and Fuse Box Owner’s Manual
Introducing the fuses and fuse box, which are essential parts of the 2024 Volkswagen Polo’s electrical system. These tiny but essential components shield electrical circuits from overloads and short circuits, ensuring that different vehicle systems operate without hiccups. Come along as we examine the complex system of fuses and the fuse box in the Polo, learning how they contribute to optimum efficiency and dependability while driving.
2023 – 2024 Volkswagen ID.4 Specs, Price, Features, Mileage and Review
Volkswagen Fuses and Fuse Box
At the time of publication we are unable to provide an complete overview of the locations of the fuses for the electrical consumers. This is because the vehicle is under constant development, because fuses are assigned differently depending on the vehicle equipment level and because several electrical consumers may use a single fuse. You can get more information about the fuse layout from a correspondingly qualified workshop. Volkswagen recommends using a Volkswagen dealership. Several electrical consumers can share a single fuse. Conversely, a single consumer could have more than one fuse. Therefore fuses should only be replaced when the cause of the fault has been rectified.
- If a new fuse blows again shortly after fitting, have the electrical system checked by a correspondingly qualified workshop as soon as possible. Volkswagen recommends using a Volkswagen dealership.
WARNING
The high voltage in the electrical system can cause electric shocks and serious burns. Contact with the electricalwiring of the ignition system can cause serious or fatal injuries.
- Never touch the electrical wiring of the ignition system.
WARNING
Using unsuitable fuses, repairing fuses and bridging an electrical circuit without fuses can cause serious damage or a fire in the vehicle. This can result in serious or fatal injuries.
- Replace fuses only with fuses with the same rating and size. Make sure that the colour and markings are identical to the defective fuse.
- Never repair fuses.
- Never use a metal strip, paper clip or similar objects to replace a fuse.
NOTICE
If a fuse is replaced when the ignition is switched on, the engine is running, lights are switched on or when other electrical consumers are switched on, this can damage the electrical system.
- Switch off the engine and switch off the lights and other electrical consumers.
- Make sure that the engine cannot be started when changing a fuse.
NOTICE
Damage can also be caused at other locations in the electrical system if a fuse is replaced with a fuse that has a higher rating.
- Never replace a fuse with a fuse that has a higher rating.
NOTICE
Dirt and moisture in the fuse boxes can damage the electrical system.
- Protect open fuse boxes against the ingress of dirt and moisture.
- Avoid causing short circuits in the electrical system.
- Check that the covers of the fuse boxes are closed tight again and are not damaged.
- There are other fuses in the vehicle in addition to those described in this chapter. These should be changed only by a correspondingly qualified workshop. Volkswagen recommends using a Volkswagen dealership.
Volkswagen Fuses in the engine compartment
Opening the fuse box in the engine compartment
- Fuse box cover.
In some vehicles, a pair of plastic grippers for removing fuses is located on the inside of the cover of the fuse box or on the fuse carrier.
Removing the cover
- Open the bonnet.
- To unlock the fuse box cover, push the catches in the direction of the arrow→ Fig. 1 1.
- Lift off the cover.
Installing the cover
- Place the cover on the fuse box.
- Press the cover down until the cover audibly engages into position on both sides.
Fuse overview of the fuses in the engine compartment
The overview shows the fuse locations of the electrical consumers relevant for the driver. The first column in the overview contains the location. The other columns contain the amp rating, the fuse type and the electrical consumer protected by the fuse. Depending on country and on the equipment of your vehicle, the fuse numbers and positions may differ to those given in the overview. If necessary, ask a correspondingly qualified workshop for the exact fuse layout. Volkswagen recommends using a Volkswagen dealership.
Fuse assignment
Fuse location → Fig. 1 :
- F9
- 7.5 amps, ATO®, brake light sensor.
- F18
- 30 amps, ATO®, front wipers.
Volkswagen Fuses in the dash panel User Manual
Opening the fuse box in the dash panel (left-hand drive vehicle)
Removing the cover
- Reach behind the cover and pull off in the direction of the arrow→ Fig. 1.
Installing the cover
- Align the cover on the opposite side and fold it closed in the opposite direction to the arrow until it audibly engages → Fig. 1.
Opening the fuse box in the dash panel (right-hand drive vehicle)
- Restrictor.
- Catches.
Removing the cover
- Open the glove box and empty if necessary.
- Push restrictor upwards into the opening of the holder and pull out to the side in the direction of the arrow → Fig. 2 1.
- Push catches upwards in the direction of the arrow at the same time open the glove box further→ Fig. 2 2.
Installing the cover
- Move glove box into position.
- Insert the restrictor into the opening in the holder and slide upwards in the opposite direction to the arrow until it engages → Fig. 2 1.
- Carefully push the glove box forwards past the resistance of the catches → Fig. 2 2.
Fuse overview of the fuses in the dash panel
The overview shows the fuse locations of the electrical consumers relevant for the driver. The first column in the overview contains the location. The other columns contain the amp rating, the fuse type and the electrical consumer protected by the fuse. Depending on country and on the equipment of your vehicle, the fuse numbers and positions may differ to those given in the overview. If necessary, ask a correspondingly qualified workshop for the exact fuse layout. Volkswagen recommends using a Volkswagen dealership.
Fuse assignment
Fuse location → Fig. 1 :
- F4
- 10 amps, ATO®, light switch.
- F5
- 30 amps, ATO®, electric glass roof.
- F6
- 40 amps, ATO®, central locking.
- F8
- 30 amps, ATO®, blower regulator.
- F19
- 25 amps, ATO®, Infotainment system.
- F20
- 30 amps, ATO®, rear window heating.
- F28
- 7.5 amps, ATO®, anti-theft alarm.
- F29
- 7.5 amps, ATO®, anti-theft alarm.
- F31
- 7.5 amps, MINI®, air conditioning block.
- F36
- 20 amps, ATO®, horn.
- F43
- 15 amps, MINI®, rear window wiper.
- F49
- 15 amps, MINI®, exterior lighting, front left.
- F50
- 15 amps, MINI®, exterior lighting, front right.
- F52
- 7.5 amps, MINI®, exterior lighting, rear left.
- F54
- 7.5 amps, MINI®, exterior lighting, rear right.
- F55
- 20 amps, ATO®, cigarette lighter, sockets.
Fuse locations for vehicles with factory-fitted towing bracket:
- F1
- 20 amps, JCASE®, trailer control unit.
- F10
- 20 amps, ATO®, trailer charging cable.
- F60
- 30 amps, JCASE®, trailer control unit, right.
- F61
- 30 amps, JCASE®, trailer control unit, left.
Electric windows and electrically adjustable seats may be protected by circuit breakers or control units which switch on again automatically a few seconds after the overload, e.g.frozen windows, has been rectified.
Changing blown fuses User Manual
Preparations
- Switch off the ignition, the lights and all electrical consumers.
Detecting a blown fuse
- If a flat blade fuse (ATO®, MINI®) has blown, this can be recognised from the top and side through the transparent housing due to the melted metal strip → Fig. 1.
- If a cartridge fuse (JCASE®) has blown, this can be recognised from the top through the transparent housing due to the melted metal strip → Fig. 1.
Fuse types
- Standard flat blade fuse (ATO®).
- Small flat blade fuse (MINI®).
- Cartridge fuse (JCASE®).
Colour coding of fuses
Fuses (ATO® – MINI®).
- Colour
- Amp rating
- Black
- 1 amps
- Purple
- 3 amps
- Orange
- 5 amps
- Brown
- 7.5 amps
- Red
- 10 amps
- Blue
- 15 amps
- Yellow
- 20 amps
- White or clear
- 25 amps
- Green
- 30 amps
- Light green
- 40 amps
- Fuses (cartridge, JCASE®)
- Blue
- 20 amps
- Pink
- 30 amps
- Green
- 40 amps
- Red
- 50 amps
- Yellow
- 60 amps
Changing fuses
- If applicable, take the plastic grippers out of the fuse box or the cover of the respective fuse box→ Fig. 2.
- Push the plastic grippers clip suitable for the fuse type onto the fuse from the top or the side.
- Remove the fuse.
- If the fuse has blown, replace it with a new fuse with the same rating (same colour and same markings) and same size →.
- Once the new fuse has been inserted, put the plastic grippers back in the cover.
- Insert the cover again or close the fuse box cover.
NOTICE
You can damage another location in the electrical system by using a fuse with a higher amp rating.
- Never replace a fuse with a fuse that has a higher rating.
FAQs
The fuses and fuse box in the 2024 Volkswagen Polo serve to protect electrical circuits from overloads and short circuits by interrupting the flow of electricity when necessary.
The fuse box of the 2024 Volkswagen Polo typically contains multiple fuses, each assigned to different electrical components or systems throughout the vehicle.
The fuse box in the 2024 Volkswagen Polo is typically located in a convenient and accessible location, such as the dashboard, engine compartment, or trunk area, depending on the vehicle’s configuration.
The 2024 Volkswagen Polo may use different types of fuses, including blade fuses, cartridge fuses, or mini fuses, depending on the specific electrical requirements of the vehicle.
Fuses in the 2024 Volkswagen Polo protect electrical circuits by melting or breaking the circuit when an overload or short circuit occurs, preventing damage to components and potential fire hazards.
Yes, fuses in the 2024 Volkswagen Polo can typically be replaced easily by removing the old fuse and inserting a new one of the same amperage rating.
Common signs of a blown fuse in the 2024 Volkswagen Polo include loss of power to specific electrical components, such as lights, radio, or power windows, and the failure of certain systems to function properly.
To determine which fuse is blown in the 2024 Volkswagen Polo, you can visually inspect the fuses in the fuse box or use a multimeter to check for continuity.
Yes, the 2024 Volkswagen Polo typically comes equipped with spare fuses stored in the fuse box or in a designated compartment within the vehicle for quick and easy replacement.
Yes, aftermarket accessories installed in the 2024 Volkswagen Polo may draw additional power from the electrical system, potentially causing fuses to blow if the accessory exceeds the capacity of the circuit.
When replacing fuses in the 2024 Volkswagen Polo, it’s important to ensure that the vehicle’s ignition is turned off and that the corresponding electrical component is not in use to prevent electrical shock or damage.
To access the fuse box in the 2024 Volkswagen Polo, you typically need to locate the fuse box cover, which can be removed by pressing tabs or using a screwdriver, depending on the vehicle’s design.
While there are no specific maintenance tasks required for the fuse box in the 2024 Volkswagen Polo, it’s advisable to periodically check the fuses for signs of damage or wear and replace them as needed to ensure proper electrical function.
Yes, a blown fuse in the 2024 Volkswagen Polo can affect multiple electrical systems or components connected to the same circuit, causing them to malfunction or cease operation until the fuse is replaced.
Useful Links
2023 – 2024 Volkswagen ID.4 Specs, Price, Features, Mileage and Review