2020 Volvo V60 Cross Country Windshield Wiper Blades
Introduction
The 2020 Volvo V60 Cross Country was created to cross various terrains with assurance and style. It is a harmonious combination of robust adaptability and exquisite luxury. Among its many cutting-edge features, the windshield wiper blade system is a vital protector of safety and clarity, guaranteeing an uninterrupted vision even in inclement weather.
The windshield wiper blade system in the 2020 Volvo V60 Cross Country was expertly crafted with great attention to detail, blending in perfectly with the car’s aesthetic appeal while providing superior performance. These wiper blades, designed to withstand rain, snow, and other climatic conditions, are proof of Volvo’s dedication to both form and function.
The 2020 Volvo V60 Cross Country’s windscreen wiper blade system proves its dependability and accuracy whether you’re driving on twisty roads or going off-road. You are free to concentrate on the road ahead, sure that your view will not be blocked, as showers bead and flow effortlessly down the glass and snowflakes surrender to the rhythmic sweep of the blades.
We delve into the cutting-edge technology, durable materials, and creative design that make up the windshield wiper blade system in the 2020 Volvo V60 Cross Country in this introduction.
Replacing Windshield Wiper Blades
The wiper blades help remove water from the windshield and rear window. Along with the washer fluid, they are designed to clean the glass and help improve visibility while driving. The windshield and rear window wiper blades can be replaced.
Raise the wiper arms to the service position. Service position is activated/deactivated via the function view in the center display when the car is stationary and the windshield wipers are not on.
- Put the wiper blade in removal position by folding it out from the wiper arm until it clicks.
- Press and hold the lock button on the wiper blade attachment.
- While holding the button down, pull the blade straight out, parallel with the wiper arm.
- Slide in the new wiper blade until it clicks into place.
- Fold the blade back toward the arm until it clicks into place. The blade is no longer in its removal position and can once again be moved.
- Check to make sure the wiper blade is securely in place.
- Press the wiper blade back against the windshield.
Wiper blades come in varying lengths
NOTE
When changing wiper blades, make sure that the blades are of different lengths. The blade on the driver’s side is longer than the one on the passenger side.
Related Information
- Using the rain sensor
- Using the windshield and headlight washers
- Using automatic rear window wiping when backing up
- Using the rain sensor’s memory function
- Using the rear window wiper/washer
- Filling washer fluid
- Putting the wiper blades in service position
- Changing rear window wipers
- Using the windshield wipers
- Wiper blades and washer fluid
Putting the Wiper blades in Service Position
The windshield wiper blades must be in the service (vertical) position for certain operations, e.g. replacing the blades.
Windshield wipers in the service position.
The windshield wipers must be in the service position when replacing, washing or lifting the blades (e.g. to scrape ice or snow from the windshield).
CAUTION
Before placing the wipers in service position, ensure that they have not frozen to the windshield.
Tap the Wiper Service Position button. The indicator light in the button will illuminate when service position is activated. The wipers will move to the service position when activated. To deactivate the service position, tap Wiper Service Position once. The indicator light in the but-ton will go out when service position is deactivated.
The wiper blades will also move out of the service position if:
Activating/deactivating Service Position
The service position can be activated/deactivated when the vehicle is stationary and the windshield wipers are switched off. Service position is activated/deactivated via Function view in the center display:
Tap the Wiper Service Position button. The indicator light in the button will illuminate when service position is activated. The wipers will move to the service position when activated. To deactivate the service position, tap Wiper Service Position once. The indicator light in the but-ton will go out when service position is deactivated.
The wiper blades will also move out of the service position if:
- The windshield wipers are turned on.
- The windshield washers are turned on.
- The rain sensor is activated.
- The vehicle begins moving.
CAUTION
If the wiper arms in service position are raised from the windshield, they must be folded back against the windscreen before activating wiping, washing or rain sensor as well as before departure. This is to prevent scratching the paint on the hood.
Related Information
- Using the rain sensor
- Using the windshield and headlight washers
- Using automatic rear window wiping when backing up
- Using the rain sensor’s memory function
- Using the rear window wiper/washer
- Filling washer fluid
- Replacing windshield wiper blades
- Changing rear window wipers
- Using the windshield wipers
- Wiper blades and washer fluid
Filling Washer Fluid
Washer fluid is used to keep the headlights, windshield and rear window clean. Washer fluid containing anti-freeze should be used in very cold weather (below-freezing temperatures).
Fill washer fluid into the reservoir with the blue cover. The reservoir is used for the wind-shield washer, tailgate window washer and headlight washer*
NOTE
When there is approximately 1 liter (1 qt) of washer fluid remaining, the message Washer fluid Level low, refill and the symbol will be displayed in the instrument panel.
Recommended grade: Washer fluid recommended by Volvo, with frost protection during cold weather and temperatures below the freezing point.
CAUTION
Use Volvo’s original washer fluid or an equivalent fluid with the recommended pH value between 6 and 8, diluted as recommended, e.g. in a 1:1 solution with pH-neutral water.
CAUTION
Use washer fluid with anti-freeze when temperatures are below the freezing point to help keep the pump, reservoir and hoses from freezing.
Volume:
- Vehicles with headlight washing: 5.5 liters (5.8 qts).
- Vehicles without headlight washing: 3.5 liters (3.7 qts).
Related information
- Using the rain sensor
- Using the windshield and headlight washers
- Using automatic rear window wiping when backing up
- Using the rain sensor’s memory function
- Using the rear window wiper/washer
- Putting the wiper blades in service position
- Replacing windshield wiper blades
- Changing rear window wipers
- Using the windshield wipers
- Wiper blades and washer fluid
FAQs
Every six to twelve months, or as soon as you notice streaking, skipping, or decreased vision in the rain, wiper blade replacement is advised.
The wiper blades for the driver’s and passenger’s sides of the 2020 V60 Cross Country are normally around 24 inches and 20 inches, respectively.
You can certainly change wiper blades at home. The majority of wiper blades are made to be quickly and easily installed without the use of any additional tools.
Your wiper blades may need to be replaced if you observe streaks, chattering, or a noisy operation while using them.
The ideal wiper blades for your V60 Cross Country should be high-quality OEM (Original Equipment Manufacturer) or reputed aftermarket wipers that are made exclusively for your car model.
To eliminate dirt, debris, and grime that could impair their operation, wipe off the rubber component of the wiper blades on a regular basis with a damp cloth or paper towel.
Yes, you can keep your wiper blades clean and in good working order by cleaning them using windshield wiper fluid.
Yes, you can keep your wiper blades clean and in good working order by cleaning them using windshield wiper fluid.
Yes, wiper blades are frequently made of silicone, rubber, or a combination of these materials. In harsh weather, silicone blades often last longer and function more effectively.
To guarantee even and constant performance, it is advised to change both wiper blades at once.
While universal wiper blades might work, it’s recommended to buy wiper blades made particularly for your car to ensure a good fit and proper performance.
Squeaking may be caused by dirt or other material on the wiper blades or windscreen. Oft times, the noise can be silenced by cleaning both surfaces.
The majority of wiper blades can be quickly removed by depressing a release tab or button close to the wiper arm connection and sliding the blade out
In general, trimming wiper blades is not advised since it may impair their performance and coverage.
If the wiper blades are suitable with the standards of your car, then the answer is yes. To guarantee quality and the right fit, look for established names.
Useful links
View Full PDF: 2020 Volvo V60 Cross Country| Volvo