2020 Volvo V60 Cross Country Wiper Blades and Washer
Introduction
The 2020 Volvo V60 Cross Country is a flexible and fashionable luxury wagon that combines tough characteristics with Scandinavian style. Its wiper blade and washer system is one of the crucial elements that contributes to a safe and clear driving experience, especially in bad weather. The washer system effectively dispenses windshield washer fluid to assist in clearing away dirt, grime, and debris, complementing the wiper blades.
In conclusion, the wiper system and blades on the 2020 Volvo V60 Cross Country are crucial parts that put driver comfort and safety first. These features demonstrate Volvo’s dedication to both practical excellence and aesthetic appeal and are designed to handle varied weather conditions and retain optimal visibility, making driving the V60 Cross Country a seamless and secure ride, regardless of the elements.
Wiper Blades and Washer Fluid
The wipers and the washer fluid are used to improve visibility and the headlight pattern.
The washer nozzles are heated* automatically in cold weather to prevent the washer fluid from freezing.
When there is approximately 1 liter (1 qt) of washer fluid remaining, a message to refill will appear in the instrument panel.
Related information
- Using the rain sensor
Using the windshield and headlight washers
Using the rain sensor’s memory function
Filling washer fluid
Windshield wipers in the service position
Replacing windshield wiper blades
Using the windshield wipers
Using the Windshield Wipers
The windshield wipers clean the windshield. The right-side steering wheel lever is used to adjust windshield wiper settings.
Right-hand steering wheel lever.
- Thumb wheel, used to set rain sensor sensitivity and interval wiper speed.
Single sweep
Move the lever down and release for a single sweep.
Wipers off
Move the lever to position 0 to turn off the windshield wipers.
Interval wipers
Set the number of sweeps per time unit with the thumb wheel when interval wip-ers are selected.
Continuous wipersMove the lever upward for the wipers to operate at normal speed.
Move the lever upward again for the wipers to operate at high speed.
CAUTION
Before activating the wipers, make sure that the wiper blades are not frozen in place and that any snow or ice on the windshield has been scraped away.
CAUTION
Use plenty of washer fluid when the wipers clean the windshield. The windshield must be wet when the windshield wipers are working.
Related information
- Using the rain sensor
Using the windshield and headlight washers - Wiper blades and washer fluid
- Using the rain sensor’s memory function
Filling washer fluid
Windshield wipers in the service position
Replacing windshield wiper blades
Using the Rain Sensor
The rain sensor monitors the amount of water on the windshield and automatically starts the wind-shield wipers. Rain sensor sensitivity can be adjusted using the thumb wheel on the right-hand steering wheel lever.
Right-hand steering wheel lever.
- Rain sensor button
Thumb wheel, sensitivity/interval wiper speed
When the rain sensor is activated, the
rain sensor symbol will be displayed in the instrument panel.
Activating the rain sensor
When the rain sensor is activated, the engine must be running or the ignition must be in mode I or II. The windshield wiper lever must also be in position 0 or in the single sweep position.
Activate the rain sensor by pressing the rain sensor button .
If the lever is pressed down, the wipers will make additional sweeps across the windshield.
Turn the thumb wheel upward for increased sensitivity and downward for decreased sensitivity. The wipers will make one extra sweep when the thumb wheel is turned upward.
Deactivate the rain sensor
Deactivate the rain sensor by pressing the rain sensor button or moving the lever upward to another wiper mode.
The rain sensor is automatically deactivated in ignition mode 0 or when the engine is switched off.
The rain sensor is also automatically deactivated when the wiper blades are put in the service position. The rain sensor will reactivate when service mode is switched off.
CAUTION
The windshield wipers may start inadvertently and be damaged in automatic car washes. Deactivate the rain sensor when the engine is running or when the ignition is in mode I or II. The symbol in the instrument panel will go out.
Related information
- Using the windshield and headlight washers
Wiper blades and washer fluid - Using the rain sensor’s memory function
- Filling washer fluid
Windshield wipers in the service position - Replacing windshield wiper blades
- Using the windshield wipers
Using the Rain Sensor’s Memory Function
The rain sensor monitors the amount of water on the windshield and automatically starts the wind-shield wipers.
Activating/deactivating memory function
The rain sensor’s memory function can be set to activate so that the rain sensor button does not need to be pressed each time the engine is started:
- Tap Settings in the Top view in the center display.
- Tap My Car Wipers.
- Select Rain Sensor Memory to activate/deactivate the memory function.
Related information
- Using the rain sensor
Using the windshield and headlight washers
Wiper blades and washer fluid
Filling washer fluid
Windshield wipers in the service position
Replacing windshield wiper blades
Using the windshield wipers
Using the windshield and headlight washers
The windshield and headlight washers clean the windshield and headlights. Use the right-side steering wheel lever to start the windshield and headlight washers.
Starting the windshield and headlight washers.
Washing function, right-hand steering wheel lever.
- Move the right-hand steering wheel lever toward the steering wheel to start the wind-shield and headlight washers.
> After the lever is released, the wipers make several extra sweeps.
CAUTION
Avoid activating the washer system when it is frozen or the fluid reservoir is empty. Other-wise, there is a risk of damaging the pump.
Headlight washer*
To save washer fluid, the headlights are washed automatically according to a defined interval when the headlights are on.
Reduced washing
When there is about 1 liter (1 qt) of washer fluid left in the reservoir and the Washer fluid
Level low, refill message is displayed in the instrument
panel together with the
symbol, the washer fluid supply to the headlights is cut off. This is to prioritize windshield cleaning and visibility through it. The headlights are only washed if high or low beam is on.
Related information
- Using the rain sensor
Wiper blades and washer fluid - Using the rain sensor’s memory function
- Filling washer fluid
- Windshield wipers in the service position
- Replacing windshield wiper blades
Using the windshield wipers
FAQs
Typically, wiper blades need to be changed every six to twelve months or as soon as you detect streaking, skipping, or decreased vision while the wipers are in operation.
For the best fit and performance, it is advised to use wiper blades made especially for your Volvo V60 Cross Country.
OEM wiper blades are made to the specifications of your car, guaranteeing the finest fit and performance. It is advised to use OEM blades for the best outcomes.
Cleaning the rubber component of the blades frequently with a moist cloth can help keep them clean and functional.
A filthy windshield or worn-out blades may cause chattering or noise. Clean the windshield and the blades together. If the problem continues, think about getting new blades.
Winter blades can be used all year round even though they are made for snow and ice. In heavy rain, they might not function at their best.
In order to help clean the windshield, the washer system sprays windshield washer fluid over the surface. The wiper stalk is turned on by pulling it nearer you.
Utilize windshield washer fluid that is all-season compatible and won’t freeze in cold weather.
Regularly check the fluid level and top it off as necessary, particularly during times of high use or when getting ready for a long trip.
Nozzle clogging may be the cause of uneven spraying. Any blockages can be carefully removed with a pin or needle.
Use washer fluid whenever possible since it has chemicals that help clear the windshield and stop freezing. Water by itself could not be as efficient.
If your wipers are not operating or are operating incorrectly, there may be a problem with the wiper motor. For assistance, refer to your owner’s manual or a qualified technician.
Yes, changing wiper blades is typically simple. For instructions, refer to your owner’s manual or browse online tutorial videos.
To guarantee constant performance and even wear, it is advised to replace both wiper blades at once.
Authorized Volvo dealerships and reliable car parts retailers both sell OEM replacement wiper blades. Online merchants also provide a range of choices.
Useful links
View Full PDF: 2020 Volvo V60 Cross Country| Volvo