Volvo S90 T8 2019 Wiper Blades and Washer Instruction
Introduction
The Volvo S90 T8 2019 is an outstanding example of the brand’s dedication to excellence in automotive engineering. It combines luxury, performance, and innovation. The wiper blades and washer system, one of its many cutting-edge technologies, are essential in maintaining good sight and safety for the driver and passengers. These seemingly unimportant parts have been carefully developed and integrated to function at their best, especially in bad weather. We look into the wiper blades and washer system of the Volvo S90 T8 2019 in this article, illuminating frequently asked questions, maintenance advice, and crucial information. The wiper blades ceaselessly sweep the windscreen, preserving an unimpeded view of the road ahead whether you’re driving through rain, snow, or dust. On the other hand, the washer system provides a practical technique to disperse washer fluid, effectively cleaning filth, and further improving the driving experience.
This thorough guide aims to arm you with the knowledge required to guarantee your wiper blades and washer system perform at their best, covering everything from understanding the optimum size of wiper blades for your Volvo S90 T8 2019 to learning about basic maintenance practices and resolving frequent difficulties. You’ll learn the significance of these seemingly insignificant parts as we proceed and develop understanding of how they affect the overall comfort, safety, and performance of your Volvo S90 T8 2019. Let’s dive in and learn more about wiper blades and washer systems in relation to the 2019 Volvo S90 T8.
Wiper Blades and Washer Fluid
The wipers and the washer fluid are used to improve visibility and the headlight pattern.
The washer nozzles are heated* automatically in cold weather to prevent the washer fluid from freezing.
When there is approximately 1 liter (1 qt) of washer fluid remaining, a message to refill will appear in the instrument panel.
Related information
- Using the rain sensor
Using the windshield and headlight washers
Using the rain sensor’s memory function
Filling washer fluid
Windshield wipers in the service position
Replacing windshield wiper blades
Using the windshield wipers
Using the Windshield Wipers
The windshield wipers clean the windshield. The right-side steering wheel lever is used to adjust windshield wiper settings.
Right-hand steering wheel lever.
- Thumb wheel, used to set rain sensor sensitivity and interval wiper speed.
Single sweep
Move the lever down and release for a single sweep.
Wipers off
Move the lever to position 0 to turn off the windshield wipers.
Interval wipers
Set the number of sweeps per time unit with the thumb wheel when interval wipers are selected.
Continuous wipersMove the lever upward for the wipers to operate at normal speed.
Move the lever upward again for the wipers to operate at high speed.
CAUTION
Before activating the wipers, make sure that the wiper blades are not frozen in place and that any snow or ice on the windshield has been scraped away.
CAUTION
Use plenty of washer fluid when the wipers clean the windshield. The windshield must be wet when the windshield wipers are working.
Related information
- Using the rain sensor
Using the windshield and headlight washers - Wiper blades and washer fluid
- Using the rain sensor’s memory function
Filling washer fluid
Windshield wipers in the service position
Replacing windshield wiper blades
Using the Rain Sensor
The rain sensor monitors the amount of water on the windshield and automatically starts the wind-shield wipers. Rain sensor sensitivity can be adjusted using the thumb wheel on the right-hand steering wheel lever.
Right-hand steering wheel lever.
- Rain sensor button
Thumb wheel, sensitivity/interval wiper speed
When the rain sensor is activated, the
rain sensor symbol will be displayed in the instrument panel.
Activating the rain sensor
When the rain sensor is activated, the engine must be running or the ignition must be in mode I or II. The windshield wiper lever must also be in position 0 or in the single sweep position.
Activate the rain sensor by pressing the rain sensor button .
If the lever is pressed down, the wipers will make additional sweeps across the windshield.
Turn the thumb wheel upward for increased sensitivity and downward for decreased sensitivity. The wipers will make one extra sweep when the thumb wheel is turned upward.
Deactivate the rain sensor
Deactivate the rain sensor by pressing the rain sensor button or moving the lever upward to another wiper mode.
The rain sensor is automatically deactivated in ignition mode 0 or when the engine is switched off.
The rain sensor is also automatically deactivated when the wiper blades are put in the service position. The rain sensor will reactivate when service mode is switched off.
CAUTION
The windshield wipers may start inadvertently and be damaged in automatic car washes. Deactivate the rain sensor when the engine is running or when the ignition is in mode I or II. The symbol in the instrument panel will go out.
Related information
- Using the windshield and headlight washers
Wiper blades and washer fluid - Using the rain sensor’s memory function
- Filling washer fluid
Windshield wipers in the service position - Replacing windshield wiper blades
- Using the windshield wipers
Using the Rain Sensor’s Memory Function
The rain sensor monitors the amount of water on the windshield and automatically starts the wind-shield wipers.
Activating/deactivating memory function
The rain sensor’s memory function can be set to activate so that the rain sensor button does not need to be pressed each time the engine is started:
- Tap Settings in the Top view in the center display.
- Tap My Car Wipers.
- Select Rain Sensor Memory to activate/deactivate the memory function.
Related information
- Using the rain sensor
Using the windshield and headlight washers
Wiper blades and washer fluid
Filling washer fluid
Windshield wipers in the service position
Replacing windshield wiper blades
Using the windshield wipers
Using the windshield and headlight washers
The windshield and headlight washers clean the windshield and headlights. Use the right-side steering wheel lever to start the windshield and headlight washers.
Starting the windshield and headlight washers.
Washing function, right-hand steering wheel lever.
- Move the right-hand steering wheel lever toward the steering wheel to start the wind-shield and headlight washers.
> After the lever is released, the wipers make several extra sweeps.
CAUTION
Avoid activating the washer system when it is frozen or the fluid reservoir is empty. Other-wise, there is a risk of damaging the pump.
Headlight washer*
To save washer fluid, the headlights are washed automatically according to a defined interval when the headlights are on.
Reduced washing
When there is about 1 liter (1 qt) of washer fluid left in the reservoir and the Washer fluid Level low, refill message is displayed in the instrument
panel together with the symbol, the washer fluid supply to the headlights is cut off. This is to prioritize windshield cleaning and visibility through it. The headlights are only washed if high or low beam is on.
Related information
- Using the rain sensor
Wiper blades and washer fluid - Using the rain sensor’s memory function
- Filling washer fluid
- Windshield wipers in the service position
- Replacing windshield wiper blades
Using the windshield wipers
FAQs
Wiper blades should be changed every six to twelve months or as soon as you notice streaking, skipping, or decreased vision.
Wiper blade diameters for the 2019 Volvo S90 T8 are normally 26 inches for the driver’s side and 20 inches for the passenger’s side.
While there are numerous types of wiper blades available, for the greatest fit and performance, use those made particularly for your Volvo S90 T8 2019.
Press the wiper blade assembly’s release tab, slide the old blade out, then slide the new blade in. Lift the wiper arm away from the windshield while you do this. Check to see if it locks into place.
A filthy windshield or old or damaged wiper blades may cause chattering. First, try cleaning the windshield and the blades. Think about changing the wiper blades if the problem continues.
Winter blades may perform better in snow and ice, but they might not function as well in other environments. In months other than winter, it is advised to return to using standard wiper blades.
Open the cap on the washer fluid reservoir beneath the hood, locate it, and fill it with washer fluid until the recommended level is reached. Utilize a blend suitable for the current weather.
Utilize windshield washer fluid that is appropriate for the local weather and contains antifreeze ingredients.
Usually, the washer fluid reservoir houses the washer pump. If the pump is broken, you might need to remove the reservoir in order to reach it and repair it.
It is not advised to use plain water since it could damage the washing system if it freezes in cold weather. All-season antifreeze agents are present in washer fluid.
When parking the automobile in a chilly environment, lift the wiper arms away from the windshield to avoid the wiper blades freezing to the surface.
Maintain a clean windshield, avoid operating the wipers on a dry windshield, and gently wipe the wiper blades to remove dirt using a moist cloth.
Yes, the wiper control stalk on the steering column may normally be used to change the wiper speed. For further information, consult your owner’s handbook.
Verify that the wiper motor is operating, the rear washer reservoir has washer fluid, and the rear wiper blade is firmly fastened. Consider getting help from a specialist if problems continue.
Useful Links
View Full PFD: Volvo S90 T8 2019 User Manual| Volvo
Download link: Volvo.com