2019 Yamaha VMAX 1700 LCD Display
Introduction
The advanced LCD display on the 2019 Yamaha VMAX 1700 acts as the main informational hub for riders. This state-of-the-art display offers a simple and straightforward user interface and presents important information like speed, RPM, fuel level, trip details, and various adjustable settings. The VMAX’s strong and muscular look is complemented by its contemporary design, which flawlessly combines form and function. On this high-performance cruiser motorbike, riders can easily browse through menus and obtain key information at a glance while taking in a futuristic and immersive riding experience.
LCD Display
Multi-function display
Multi-function display.
WARNING
Be sure to stop the vehicle before making any setting changes to the multi-function display. Changing settings while riding can distract the operator and increase the risk of an accident.
A “SELECT” button and a “RESET” button are located on the handlebar holder. These buttons allow you to control or change the settings in the multi-function display.
“SELECT” button- “RESET” button
The multi-function display is set to the Normal mode every time the key is turned to “ON”.
Normal mode
The following functions are available in the Normal mode:
- odometer
- two tripmeters
- fuel reserve tripmeter
- fuel meter
- clock
- transmission gear indicator
- coolant temperature meter
- self-diagnosis device
Odometer- Clock
- Tripmeter/fuel reserve tripmeter
- Coolant temperature warning indicator “
- Coolant temperature meter
- Transmission gear indicator
- Fuel level warning indicator “
- Fuel meter
Odometer
The odometer shows the total distance traveled by the vehicle.
Tripmeters
The tripmeters show the distance traveled since they were last reset.
Turn the key to “ON”. Push “SELECT” to switch the display between the trip-meters “TRIP-1” and “TRIP-2” in the following order.
TRIP-1 → TRIP-2 → TRIP-1
TIP
- The odometer will lock at 999999.
- The tripmeters will reset and continue counting after 9999.9 is reached.
- The speedometer and odometer/tripmeter displays can be switched between miles and kilo-meters. To switch the speedometer and odometer/tripmeter displays, press “SELECT” for two seconds.
The fuel reserve tripmeter shows the distance traveled on the fuel reserve. When the fuel amount in the fuel tank decreases to 3.9 L (1.03 US gal, 0.86 Imp.gal), the fuel level warning light comes on, and the tripmeter automatically changes to the fuel reserve tripmeter “TRIP-F” and starts counting the distance traveled from that point. In that case, push “SELECT” to switch the display in the following order: TRIP-F → TRIP-1 → TRIP-2 → TRIP-F
If you continue to ride the vehicle after the fuel reserve tripmeter “TRIP-F” appears, the fuel meter and fuel level warning indicator “ ” start flashing. To reset a tripmeter, select it by pushing “SELECT”, and then push “RESET” for one second.
The fuel reserve tripmeter can be reset manually, or after refueling and traveling 5 km (3 mi), it will reset automatically and disappear from the display.
Fuel meter
The fuel meter indicates the amount of fuel in the fuel tank. The fuel level dis-played decreases from “F” (full) to-wards “E” (empty) as the fuel tank level decreases. When the fuel amount in the fuel tank decreases to 3.9 L (1.03 US gal, 0.86 Imp. gal), the fuel level warning light comes on. If this occurs, refuel as soon as possible.
If you continue to ride the vehicle after the fuel reserve tripmeter “TRIP-F” appears, the fuel meter and fuel level warning indicator “ ” start flashing.
Clock
The clock displays time in 12-hour for-mat.
Transmission gear indicator
This indicator shows the selected gear. The neutral position is indicated by “ ” and by the neutral indicator light.
Coolant temperature meter
The coolant temperature meter indicates the temperature of the coolant. The coolant temperature varies with changes in the weather and engine load. If the coolant temperature meter and the coolant temperature warning indicator flash, stop the vehicle and let the engine cool.
FAQs
To navigate and choose choices, use the handlebar controls. The “SET” or “SELECT” button is used to confirm selections, whereas the “MODE” button is often used to transition between different display panels.
Yes, some VMAX 1700 models offer for a small amount of information customization, including the ability to select different trip information, an odometer, a clock, and more.
The primary screen often shows crucial data including speed, gear position, fuel level, and engine temperature.
Yes, the tachometer, which shows the engine RPM, is frequently prominently shown on the main screen.
A fuel consumption or immediate MPG indicator may be included in some LCD display models, yes.
Yes, you can frequently swap between riding modes using the display menu if your VMAX model offers more than one.
In order to assist you keep track of servicing requirements, some models may display maintenance reminders depending on mileage or time intervals.
A clock is typically built into the display, allowing you to monitor the time while you’re riding.
Depending on the model, you might be able to change the screen brightness to fit your tastes and the riding environment.
A low fuel warning indicator or message does really appear on many bikes when the fuel level is getting low.
A few more sophisticated models might include Bluetooth pairing for calls, messaging, or music control, for example.
It’s crucial to confirm whether the VMAX 1700 has tire pressure monitoring devices, even though some contemporary bikes do.
If there is a technical problem with the bike, certain displays may display simple diagnostic codes or alarms.
Typically, you can reset trip meters or other recorded data by entering the relevant option in the display settings.
Yes, you can speak with Yamaha dealerships or approved service facilities to learn about replacement possibilities if your LCD display is damaged.
Useful Links
View Full PDF: 2019 Yamaha VMAX 1700|YAMAHA