Nissan ARMADA 2022 Seats, Head Restraints/Headrests, and Seat Belts 

With its thoughtfully designed seats, movable headrests, and sturdy seat belts, the 2022 Nissan Armada places a high priority on the comfort and safety of its passengers. Long-distance travel is made more pleasant and supportive for both the driver and the passengers thanks to the roomy and ergonomically designed seats in the Armada. Passengers of different heights can adjust the headrests, which promotes appropriate head and neck support. Additionally, Nissan’s dedication to safety and passenger protection is demonstrated by the Armada’s premium seat belts and restraint systems, which are intended to secure occupants in the case of an accident. The Armada is an elegant and versatile SUV.

2023 Nissan Armada Specs, Price, Features and Mileage (Brochure)

SEATS

WARNING
Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat belt properly. 

• After adjustment, gently rock in the seat to make sure it is securely locked. Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. To help avoid the risk of injury or death through the unintended operation of the vehicle and/or its systems, do not leave children, people who require the assistance of others or pets unattended in your vehicle. Additionally, the temperature inside a closed vehicle on a warm day can quickly become high enough to cause a significant risk of injury or death to people and pets. The seatback should not be reclined any more than needed for comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased.

FRONT SEATS

Front power seat adjustment

Operating tips:
The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery.

CAUTION
When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damages.

Forward and backward:
Moving the switch forward or backward will slide the seat forward or backward to the desired position.

Reclining:
Move the recline switch backward until the desired angle is obtained. To bring the seatback forward again, move the switch forward. The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the transmission is in the P (Park) position.

Seat lifter:

1. Pull up or push down the adjusting switch to adjust the seat height until the desired position is achieved.
2. Tilt up or down the adjusting switch to adjust the front angle of the seat until the desired position is achieved (for the driver’s seat).

Lumbar support:
The lumbar support feature provides lower back support to the occupants. Push the front or back end of the switch to adjust the seatback lumbar area.

Nissan Armada 2nd Row Seat Adjustment

WARNING
Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an accident or sudden stop. When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.

Reclining
Pull the reclining lever and position the seatback at the desired angle. Release the reclining lever after positioning the seat at the desired angle. To return the seatback, pull the lever. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit. The seatback may also be reclined to allow occupants to rest when the vehicle is parked.

WARNING
Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat belt properly. After adjustment, check to be sure the seat is securely locked.

Entry to 3rd-row seat

CAUTION
Do not drive with the 2nd-row seat tipped up. Be careful not to allow the 2nd-row seat to pinch, hit any part of your body or other people when operating the 2nd-row seat. Make sure the seat path is clear of all objects before moving the seat. The 2nd-row seat can be tipped forward for easy entry to or exit from the 3rd-row seat.

To enter the 3rd-row seat, pull the lever or located on the 2nd-row seat and fold the seatback forward at an angle over the seat base. Then lift up the seat base and tip the 2nd row seat forward. This will release the back of the seat so it may be tipped forward. To exit the 3rd-row seat, pull the lever or fold the seatback forward onto the seat base. Then lift up the seat base and tip it forward.

3RD ROW SEATS
Manual seat adjustment (if so equipped)

Reclining:
Pull the strap and position the seatback at the desired angle. Release the strap after positioning the seat at the desired angle. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit. The seatback may also be reclined to allow occupants to rest when the vehicle is parked.

WARNING
Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat belt properly.  After adjustment, check to be sure the seat is securely locked.

Folding:
Pull the strap and fold the seat back. Return the seatback until it securely locks in position.

WARNING
Never allow anyone to ride in the cargo area or on the third-row seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an accident or sudden stop.

Properly secure all cargo with
When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop.

Power seat adjustment (if so equipped)
The 3rd-row power folding seat controls are located behind the 2nd-row seat (both the driver’s and front passenger’s side) on the 3rd-row cup holder console. There are also controls located on the rear quarter trim panel behind the 3rd-row seats (passenger’s side).

Before operating the 3rd-row seats:

• Make sure the 2nd-row seatback is not reclined.
• Lower the 3rd-row head restraint to the full down position.
• Disconnect and secure the center seat belt and tongues into the retractor base. 
  • Always reconnect the center seat belt when the seat is returned to the upright position
• Make sure that there are no objects on the seatback cushion.

Reclining:
Push and hold the rear side of the switch beside the 3rd-row cup holders until the desired seatback angle (up to 20 degrees) is obtained. To move the seatback forward again, push and hold the front side of the switch until the desired angle is obtained.

WARNING
After adjustment, check to be sure the seat is securely locked. Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. For the most effective protection when the vehicle is in motion, the seat should be upright.

Folding:
Push the front side of the switch located on the passenger side of the cargo room. The corresponding seatback (R: right side, L: left side) will be folded down automatically. Push the rear side of the switch. The seatback will be returned automatically. A beep sounds once and the seatback will be folded down/returned automatically. A beep sounds twice when the seatback is fully folded down/returned to the seating position. If the control unit detects any obstacles or malfunctions while in the power operation, a beep sounds for 4 seconds and the seatback will return to the folded/seating position automatically. Check if there are any obstacles caught that prevent seats from folding/returning. Have the system check if the beep sounds even though any obstacles are not caught, or if the seatback is not moved even though the switch is pushed. It is recommended that you visit a NISSAN dealer for this service.

NOTE:

• Operating the power folding seats can discharge the vehicle battery if the engine is not running.
• If the third-row seat does not completely fold or return, move the seat back fully backward once. Push the rear side of the switch, then the seatback will be returned to the seating position. Push the rear side of the switch again, then the seatback will be moved to a fully backward position.

CAUTION
When operating the rear power seatback return, make sure that the vehicle is stopped and the transmission is in the P (Park) position. The auto reverse function may not operate depending on the shape or position of obstacles.

WARNING
Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an accident or sudden stop. When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. Do not fold down the rear seats when occupants are in the rear seat area or any cargo is on the rear seats.

ARMREST

Front seats
The console box lid can be used as an armrest.

2nd row seat (if so equipped) Pull and draw the armrest forward until it is horizontal.

FLEXIBLE SEATING

WARNING
Never allow anyone to ride in the cargo area or on the rear seats when they are in the fold-down position. In a collision, people riding in these areas without proper restraints are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly. Do not fold down the rear seats when occupants are in the rear seat area or any cargo is on the rear seats. Head restraints should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been removed for any reason. If the head restraints are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. When folding the bench seat back down for maximum storage, make sure the seat base is in the latched position by rocking the seat base. If the seat base is not properly secured, cargo stored on top of a folded seat-back may become a projectile causing personal injury or vehicle damage.

CAUTION

• When folding the 2nd-row seat for maximum cargo hauling, be sure that the cargo does not contact the center console of the captain’s seat (if so equipped) to avoid possible damage to the console.
• When folding or returning the seat(s) to the upright position, to avoid injury to yourself and others:
  •  Make sure that the seat path is clear before moving the seat.
  • Be careful not to allow hands or feet to get caught or pinched in the seat.

Stowing 2nd and 3rd row seats
To stow 2nd and 3rd-row seats for maximum cargo capacity:

1. Push and hold the corresponding switch located on the instrument panel below the audio system. 
   
2. Push the folded seat down until it locks in position.
   
3. Power operation (if so equipped): Manual operation (if so equipped): Fold the 3rd-row seat flat using the strap located on the 3rd-row seat-backs. 
4. Return 3rd-row seats to seating positions by raising the 3rd-row seatbacks to an upright position using the switches or straps. Make sure the seatback is locked in position. 
5.  Return the 2nd-row seat to a seating position by raising the 2nd-row seat-backs to an upright position. Make sure the seatback is locked in position.

CAUTION
When folding the 2nd-row seat for maximum cargo hauling, be sure that the cargo does not contact the center console of the captain’s seat (if so equipped) to avoid possible damage to the console.

HEAD RESTRAINTS/HEADRESTS

WARNING
Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear-end collisions. Adjustable head restraints/headrests must be adjusted properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint/headrest stalks or remove the head restraint/headrest. Do not use the seat if the head restraint/headrest has been removed. If the head restraint/headrest was removed, reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the head restraint/headrest. This may increase the risk of serious injury or death in a collision.

The illustration shows the seating positions equipped with head restraints/headrests. Indicates the seating position is equipped with a head restraint. Indicates the seating position is equipped with a headrest. Your vehicle is equipped with a head restraint/headrest that may be integrated, adjustable or non-adjustable. Adjustable head restraints/headrests have multiple notches along the stalk to lock them in a desired adjustment position. The non-adjustable head restraints/ headrests have a single locking notch to secure them to the seat frame.

• Proper Adjustment:
  •  For the adjustable type, align the head restraint/headrest so the center of your ear is approximately level with the center of the head restraint/headrest.
  •  If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
• If the head restraint/headrest has been removed, ensure that it is re-installed and locked in place before riding in that designated seating position.

ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS

1. Removable head restraint/headrest
2.  Multiple notches
3.  Lock knob
4.  Stalks

NON-ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS

1. Removable head restraint/headrest
2. Single notch
3.  Lock knob
4.  Stalks

REMOVE

CAUTION
The front head restraints with a rear display are not designed to be pulled out. The rear display may be damaged if the head restraint is forcibly pulled out.

Use the following procedure to remove the head restraint/headrest.

1. Pull the head restraint/headrest up to the highest position.
2. Push and hold the lock knob.
3. Remove the head restraint/headrest from the seat.
4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
5. Reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position.

INSTALL

1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the adjustment notch must be installed in the hole with the lock knob.
2.  Push and hold the lock knob and push the head restraint/headrest down.
3. Properly adjust the head restraint/headrest before an occupant uses the seating position.

ADJUST

For adjustable head restraint/headrest
Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.

For non-adjustable head restraint/headrest
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

Raise
To raise the head restraint/headrest, pull it up. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

Lower
To lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

FRONT-SEAT ACTIVE HEAD RESTRAINT
The Active Head Restraint moves forward utilizing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occupant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries. Active Head Restraints are effective for collisions at low to medium speeds in which it is said that whiplash injury occurs most. Active Head Restraints operate only in certain rear-end collisions. After the collision, the head restraints return to their original position. Adjust the Active Head Restraints properly as described earlier in this section.

SEAT BELTS

PRECAUTIONS ON SEAT BELT USAGE
If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes a supplemental air bag. Most U.S. states and Canadian provinces or territories specify that seat belts be worn at all times when a vehicle is being driven.

WARNING
Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly restrained in the rear seat and, if appropriate, in a child restraint. The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. Serious injury or death can occur if the seat belt is not worn properly. Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST. A lap belt worn too high could increase the risk of internal injuries in an accident. Be sure the seat belt tongue is securely fastened to the proper buckle. Do not wear the seat belt inside out or twisted. Doing so may reduce its effectiveness. Do not allow more than one person to use the same seat belt. Never carry more people in the vehicle than there are seat belts. If the seat belt warning light glows continuously while the ignition is turned ON with all doors closed and all seat belts fastened, it may indicate a malfunction in the system. Have the system checked. It is recommended you visit a NISSAN dealer for this service. No changes should be made to the seat belt system. For example, do not modify the seat belt, add material or install devices that may change the seat belt routing or tension. Doing so may affect the operation of the seat belt system. Modifying or tampering with the seat belt system may result in serious personal injury. Once a seat belt pre-tensioner has activated, it cannot be reused and must be replaced together with the retractor. It is recommended you visit a NISSAN dealer for this service. All seat belt assemblies, including retractors and attaching hardware, should be inspected after any collision. It is recommended you visit a NISSAN dealer for this service. NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the collision is minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted. All child restraints and attaching hardware should be inspected after any collision. Always follow the restraint manufacturer’s inspection instructions and replacement recommendations. The child restraints should be replaced if they are damaged.

PREGNANT WOMEN
NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snugly, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific recommendations.

INJURED PERSONS
NISSAN recommends that injured persons use seat belts, depending on the injury. Check with your doctor for specific recommendations.

THREE-POINT TYPE SEAT BELT

WARNING
Every person who drives or rides in this vehicle should use a seat belt at all times. Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat belt properly.

WARNING
Do not allow children to play with seat belts. Most seating positions are equipped with Automatic Locking Retractor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or killed if the seat belt retracts and becomes tight. This can occur even if the vehicle is parked. Unbuckle the seat belt to release the child. For the center of the 3rd-row bench seat, the connector tongue may also be released. Release the connector tongue by inserting a suitable tool (such as a key) into the connector buckle.If the seat belt cannot be unbuckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt.

Fastening the seat belts

1. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage.
   • The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the belt to move and allows you some freedom of movement in the seat.
   • If the seat belt cannot be pulled from its fully retracted position, firmly pull the belt and release it. Then smoothly pull the belt out of the retractor.
     
2.  Position the lap belt portion low and snug on the hips as shown.
3. Pull the shoulder belt portion toward the retractor to take up the extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest.

The three-point type seat belts have two modes of operation:

• Emergency Locking Retractor (ELR)
• Automatic Locking Retractor (ALR) The Emergency Locking Retractor (ELR) mode allows the seat belt to extend and retract to allow the driver and passengers some freedom of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during impacts.
  The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation.
  When the ALR mode is activated the seat belt cannot be extended again until the seat belt tongue is detached from the buckle and fully retracted. The seat belt returns to the ELR mode after the seat belt fully retracts. 
  The ALR mode should be used only for child restraint installation. During normal seat belt use by an occupant, the ALR mode should not be activated. If it is activated, it may cause uncomfortable seat belt tension.

WARNING
When fastening the seat belts, be certain that seatbacks are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop.

Unfastening the seat belts
To unfasten the seat belt, push the button on the buckle. The seat belt automatically retracts.

Checking seat belt operation

Seat belt retractors are designed to lock seat belt movement by two separate methods:
When the belt is pulled quickly from the retractor. When the vehicle slows down rapidly. To increase your confidence in the seat belts, check the operation as follows: Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement. If the retractor does not lock during this check, get the system checked. It is recommended you visit a NISSAN dealer for this service, or to learn more about seat belt operation.

Center of 2nd-row seat (if so equipped)

Selecting the correct set of seat belts:
The center seat belt buckle is identified by the CENTER mark. The center seat belt tongue can be fastened only into the center seat belt buckle.

3rd row center seat belt
The 3rd-row center seat belt has a connector tongue and a seat belt tongue. Both the connector tongue and the seat belt tongue must be securely latched for proper seat belt operation.

WARNING
Always fasten the connector tongue and the seat belt in the order shown. Always make sure both the connector tongue and the seat belt tongue are secured when using the seat belt or installing a child restraint. Do not use the seat belt or child restraint with only the seat belt tongue attached. This could result in serious personal injury in case of an accident or a sudden stop.

Stowing 3rd-row center seat belt:
When folding down the 3rd-row seat, the 3rd center seat belt can be retracted into a stowed position.

1. Hold the connector tongue so that the seat belt does not retract suddenly when the tongue is released from the connector buckle. Release the connector tongue by inserting a suitable tool such as a key into the connector buckle.
2. Store the seat belt tongue into the tongue holder first.
3. Store the connector tongue into the retractor base.

WARNING
Do not unfasten the 3rd center seat belt connector except when folding down the 3rd seat.

Attaching 3rd-row center seat belt:
Always be sure the 3rd center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the 3rd-row seat.

To connect the buckle:
Pull out the connector tongue from the retractor base . Pull out the seat belt tongue from the tongue holder . Pull the seat belt and fasten the connector buckle until it clicks . The center seat belt connector tongue and buckle are identified by the and mark. The center seat belt connector tongue can be attached only to the 3rd center seat belt connector buckle.

WARNING
When attaching the 3rd center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the 3rd center seat belt connector is completely secured. When attaching the 3rd center seat belt connector, be certain that the seatbacks are completely secured in the latched position 3rd center seat belt connector is completely secured sector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop.

Storing 3rd row seat belt buckles
Before folding down the seat, put the buckles in the storage of the seat cushion to avoid dropping it under the seat cushion.

Shoulder belt height adjustment (for front seats and 2nd row seats) The shoulder belt anchor height should be adjusted to the position best for you. To adjust, push the button, and then move the shoulder belt anchor to the desired position so that the belt passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off of your shoulder. Release the adjustment button to lock the shoulder belt anchor into position.

WARNING
After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident.

SEAT BELT EXTENDERS
If, because of body size or driving position, it is not possible to properly fit the lap-shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available that can be purchased. The extender adds approximately 8 in (200 mm) of length and may be used for either the driver or front passenger seating position. It is recommended you visit a NISSAN dealer for assistance with purchasing an extender if an extender is required.

WARNING
It is recommended that only NISSAN seat belt extenders, made by the same company that made the original equipment seat belts, be used with the NISSAN seat belts. Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured or killed in a collision or a sudden stop.

SEAT BELT MAINTENANCE
To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then, wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry. If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth. Periodically check to see that the seat belt and the metal components such as buckles, tongues, retractors, flexible wires, and anchors work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.

FAQ